I städer byggs allt fler fastigheter och anläggningar. Stark förtätning i stadsbygden innebär högre krav på samhällsplaneringen. Allt större fokus läggs på cykelinfrastrukturen i syfte att minska biltrafiken i städerna. Tätbyggda områden med stora cykelflöden kan förses med yteffektiva cykelparkeringar. En lösning till detta problem kan vara cykelparkering i två plan.

The purpose of my essay is on one hand to research and evaluate the measures that one intermediate school in Sweden, uses in order to prevent bullying and stop it in the event that one pupil happens to get bullied or harassed. In other words, I would like to show how that school is capable of creating a safe environment. Qualitative research is used to obtain these findings.On the other hand, I also wish to examine what pupils at the school think about these measures and how they perceive the attitudes of the school?s teachers and management regarding the prevention of bullying. In order to acquire this information quantitative research is used.The conclusions that I draw after conducting my research are as follows:1- Regarding the ?Anti ? bullying Performance Plan?, my essay shows that school teachers and management actively work in order to maintain a safe environment and as a result bullying is successfully prevented the school.

In motion ?a traffic program for Nacka is the result of a survey of the traffic system and transportation situation in Nacka and suggests possible development opportunities. A new traffic strategy will be developed in the municipality of Nacka the coming years, which is the reason for this study: to map the current situation, identify strengths and weaknesses, needs and opportunities. This program suggests possible development opportunities and gives an historical overview of the transportation system, the current situation and an analysis of different transportation modes. A mapping of other municipalities? traffic strategies or programs have been done and included into the program as well as a prognosis for the coming years in the municipality.

AbstractThis thesis handles the subject about emergency preparedness. The cases that are chosen are Sweden and the tsunami catastrophe and Great Britain with the bombings in London. The purpose with this case study is to reveal what factors that are important for an adequate emergency preparedness plan by studying Sweden?s and Great Britain?s emergency preparedness plans and how they handled the two catastrophes. The questions for the report are as follows:1.

A crisis is something that can happen to all of us in an unexpected situation, and the school should be prepared in a way that is the best way to handle a situation with a wide foundation through a crisis plan. On a well-defined way, you should have a developed and relevant emergency plan. Defining the word crisis can be difficult, it is an individual interpretation, and to get found out what the word stands for and it have to be discussed. The two selected schools that I have chosen to interview have discussed the understanding of the word crisis in able to get what the word means for them. The two selected schools have come to the conclusion that a crisis is something that creates disturbances for people or a person concerned to the everyday way of living.

This bachelor?s thesis is a study that examines cactus groups in Sweden from a heritage conservation perspective. Through interviews and an analysis of both historical and modern literature, the research explores why cactus groups became popular and what is required to preserve those still in existence today. A recurring challenge has been the lack of comprehensive source material, leaving some questions open for further research. The study focuses on four cities?Norrk?ping, Skellefte?, Varberg, and V?xj??that have maintained their cactus groups for nearly a century.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Municipalities in Sweden are responsible for physical planning by developing a general plan. This plan contains intended land and water use for the area. This study aims to investigate the level of integra­tion of environmental issues in the general plan of Arboga municipality and also how well adapted the municipality is for climate change. Further on, the study intends to examine the focus of the gen­eral plan and at what rate the national environmental strategies are implemented in the local physi­cal planning of Arboga municipality. Methods used for this study are interviews and reviewing of the general plan itself and other key documents.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

To achieve a working collaboration in a big, complex organization where there are vast requirements on both quality and profitability is not always an easy task. An example of this is the organization that was created in the Swedish railway industry following a series of deregulations during the past 25 years. A partial market in this organization is the railway maintenance. In order to achieve a working collaboration between actors in this organization the so-called Purchaser-provider model (PPM) is presently used for the procurement of rail maintenance projects. Previous research has shown that this market-based instrument has clear positive effects regarding the cost-efficiency but hinders the collaboration.

Skötsel av våra parker och andra gröna miljöer utgör en stor kostnad. Syftet med studien var att ta fram förslag på olika praktiska lösningar för att minimera tiden och kostnaden för skötsel av offentliga gröna miljöer och utforma dessa som ett antal råd till designers. Metoden som användes var en kombination av en litteraturstudie, där sökorden ?skötsel?, ?parkförvaltning?, ?park management?, ?low maintenance?och ?low maintenance park/garden? användes, och en undersökning där sex personer intervjuades. Det är viktigt att tänka igenom vilket mål man har med den yta som skall skötas om.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

The purpose with this thesis is to investigate how to design a urban space so that it is experienced safe and how to implement this at an actual site. Knowledge on the subject has been gathered through litterature studies and interviews with experts. Through an analysis of the site with surroundings and studies of projects with similar problems, practical actions have been observed. Part taking in the municipalities planning process has given insight in the projekt as an whole and the interests of different parties. There are many different opinions about what the word safety means. It is a feeling depending on situation, that is affecting our daily behaviour.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.