Hanterbara båtar is a new company who builds alumina boats customized for people in wheelchairs. Due to the fact that the company only built two boats yet, the production documentation is not complete. The drawing that does exist is not in an exact standard which makes production planning harder.The purpose of this work has been to make the production of the boat easier and simplify further development and modification. Product development in the form of optimizing details is also one of the main purpose of this work.This is all done by making a 3D-assembly of all the existing drawings. After this is done new drawings will be made and added to the main assembly.

?A designer rarely works alone?. The first sentence of Jonas Löwgren and Erik Stolterman's chapter on design as a social process made me curious. What if a designer worked alone? What are the actual differences between working on a project alone and as part of a group? How would it influence the creative process? What would be different when coming up with ideas, meeting with clients and setting deadlines? Does the influence of another designer stifle the individual creativity or does it actually nurish it? This paper is written to answer these and other questions as well as take you through the creative process of the production of ?Daddy? - the music video..

The purpose of this study is to describe some primary school teachers understanding of language development and approach of first and second language speakers with Arne Tragetons Writing to reading, for pupils in early ages.By using a qualitative method with interviews and participant observations and informal conversations, the basis for the survey was collected. Four teachers in three schools participated. The proportion of second-language pupils at each school was 35%, 17% and 0%. My theoretical starting point in the study was the hermeneutic research tradition, which has been used to interpret and understand the collected material. Theories of behaviorism, constructivism and socio-cultural perspective has been used in the analysis part of this study.

AimThe overall aim of this study has been to gain knowledge about what characterize upper secondary school students participating in the subject course physical education and health (PEH). To investigate this, the following questions are formulated:What motivates the students to attend PEH?How do the students experience teaching?What influences the students' opinions of the subject?MethodWe conducted a qualitative study using interview as method. Six students, from year 2; three girls and three boys, from different studying programs at an upper secondary school in the region of Mälardalen were interviewed. The students had been recommended and asked to participate by their teachers in PEH.

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

Den övergripande avsikten med denna uppsats är att försöka ge en nyanserad bild av organisationsreceptet Lean Production. Vidare försöker jag utröna vilka potentiella vinster och risker som kan tänkas uppträda i samband med implementeringen av Lean Healthcare på Universitetssjukhuset i Lund. Utgångspunkten för denna analys är Region Skånes verksamhetsmål gällande personal, patienter och ekonomi. Analysen visar att det inte är helt okontroversiellt eller oproblematiskt att anpassa och införa produktionssystemet. Allvarligast verkar konsekvenserna kunna bli för tillgodoseendet av personalmålen, medan det ser mindre problematiskt ut gällande de ekonomiska målen och patientmålen.

The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

Drawing on theories of ethnic representations in mainstream news media and racial discrimination (van Dijk 2000, Hultén 2006, Husband & Downing 2005, Wodak 2011), and using methods of critical discourse analysis (mainly van Dijk 1993, 1991, Fairclough 1995) this bachelor thesis aims to investigate the inter-textual and inter-discursive relationship between selected editorial and opinion pieces written by three mainstream right wing ?symbolic elites? and the xenophobic blog ?Avpixlat?. The three selected symbolic elites are: Per Gudmundsson, editorial writer at the second largest Swedish newspaper SvD, Andreas Johansson Heinö, academic with a P.H.D. in political science, specialized on issues of integration and ethnic relations, and Paulina Neuding, editorial writer at SvD and editor in chief for right-wing oriented magazine Neo. All three are actively taking part in the mediated discussion of ethnic relations in Sweden from a liberal-conservative perspective.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.