To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

För ett flygbolag är det viktigt att ha en effektiv planering av sina resurser. Att kunna utnyttja personal och flygplan på rätt sätt är en förutsättning för en fortsatt överlevnad på marknaden. Flygbolagens tjänstebestämmelser regleras idag enligt nuvarande BCL-D 1.15. Under våren 2004 har Luftfartsverket behandlat en remiss som utgör ett förslag på en eventuell förändring av dessa tjänstebestämmelser. Remissen är ett förslag som skall gälla det gemensamma regelverket EU-OPS.

This thesis examines history of the subject of mechatronics and innovation. The main reason tostudy mechatronics from a historical point of view is that it has never been done to a greater extent before. An overview is justified because various definitions have been used over the decades, but nowadays the subject has become more established. Focus in this thesis is mainly on development of the subject of mechatronics at Royal Institute of Technology in Stockholm. Innovation is the other aspect of this thesis.

The intention of this essay has been to investigate how the new digital technology has affected the tourism industry and marketing, as well as how travel agents and tour operators adapt to this. We also aimed to get a broader view of how the future might look like when it comes to marketing and virtual service landscapes. We decided to base our research according to these following four questions:? What affect travel agents? way of adoption to the technical development?? What purposes do the travel agents have for building up their virtual service landscape?? How much does the travel agents emphasize on digital marketing?? What can travel agents do to better adapt to the technological development in the future?We have chosen to use a qualitative research for this essay. The reason for choosing a qualitative research was to gain a wider understanding that would represent a big part of the changes of technology development.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

Worldwide consumption of cheese has increased over the years. The average Swede consumes somewhere around 20 kilograms of cheese per year, which is an increase of a 100 % over the past 50 years. One of the most popular kinds of cheese during the past decades is mozzarella, due to its? use as pizza cheese. Flavor and consistency differ between the traditional kind, made out of buffalo?s milk, and the industrially made kind, made out of cow?s milk.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

The energy sector is facing an impending paradigm shift. Today?s technology enables the end-user to generate their own energy locally at home. Furthermore, recently developed storage technologies make it possible to balance energy demand with stored energy and integrate district heating with the local power grid. This means that in the future heat and electric power will interact and energy flows is converted over energy boundaries.

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

During the last decades the evolution of information technology and the increasing ability to access information have been discussed in many ways. In the beginning the focus was on the technology but now the discussion is more and more about the use of information and how to develop knowledge out of it. There is an ongoing discussion about the difference between knowledge and information. The subject of this Master s thesis is to find out if and how the Swedish elementary school has written into its mission statements to help the pupils to become information literate. For this purpose I have examined literature about information literacy and pedagogic as well as legislation and other documents that control how the Swedish elementary schools work.

The ever-evolving information technology gives users more opportunities, but also put higher demands on them. The digital agenda of the state and society clarifies the objectives and effects academic libraries? development. E-books influence the development of organizational, economic, legal and political perspectives. At the University Library in Gävle work is ongoing. The process is controlled by the acquisition policy which makes it clear that e-books should be purchased if possible.