According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

The purpose of this report was to obtain an overview of rabbit meat production in the world, in terms of breeding and feeding. It examines how different feed components contribute to the health of the rabbit as well as the quality of the carcass, and the breeding strategies that are most common in the major producing countries. The production of rabbit meat in Sweden is at present not very large, but it is gaining ground, and that is why this paper mainly deals with the rabbit production abroad. This report also examines the disease Rabbit Viral Haermorrhagic Disease (RVHD) in Sweden, where this disease can cause big problems. The rabbit (Oryctolagus cuniculus) is very special, both in its reproduction and digestion. There is no specific mating season and the digestive tract is designed to digest forage efficiently.

The purpose of these theses is to show the financial economical situation during the change from conventional dairy production to ecological production. The thesis is accomplished by collecting information from literature and interviews where needed. The target group of these theses is dairy producers who will transform their production from conventional dairy production to certified ecological dairy production. The theses emphasise on the economic situation during the adjustment years. For this I have studied a presently producing dairy farm.

A number of studies have been made to examine several aspects of voice production in individuals with different types of hearing impairments. Most of the studies were made to explore the impact that hearing aids have for people with severe or congenital hearing impairment. So far it has been confirmed that there are changes regarding voice production in these individuals. A group that has not been investigated regarding voice production to a larger extent are hearing aid users with an acquired hearing impairment. In the present study the voice production of seven individuals, four men and three women, with a moderate acquired hearing impairment is examined.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

BackgroundThis paper is based on an issue raised by the organization Energigas Sverige, which together with the Ministry of Finance has posed the question about the fiscal impact of an increase in biogas production. Since the fiscal effects of an increased biogas production are both positive and negative, due to reduced use of fossil fuels, we want to investigate this further.PurposeThe purpose is to describe and explain the obtained fiscal impacts of an increased biogas production and based on our problem: ?What are the obtained fiscal effects caused by an increase in biogas production?? we could see the following fiscal effects: positive impact on employment, increased revenues of social security contributions and income taxes, reduced unemployment costs and reduced tax revenues on fossil fuels. These effects are summarized in a negative tax revenue of 2,6 billion SEK. Along the summarized negative effect we also accepted one of the two prepared hypotheses, which stated that an increase in biogas production leads to a negative fiscal impact. Design/Methodology/ApproachWe have chosen to work from an Anglo-Saxon scientific tradition and furthermore, we have a positivistic approach when we want to explain the relationship between cause and effect of an increase in biogas production and the following fiscal impacts.

Ethanol produced from lignocellulosic biomass has the potential to become a promisingalternative to gasoline. In this work the simultaneous saccharification and fermentation (SSF)technology was applied for ethanol production from hardwood with focus on cell growth,ethanol production and contamination.The SSF was performed at PH 5.5 and 35°C for different suspended solid concentrations(8%, 10% and 12%) of pretreated birch slurry which contained 16 % total suspended solids.Two different hexose fermenting yeast strain (Ethanol Red) and pentose fermenting yeaststrain were used.Quantifying the concentration of chemical components and metabolites in the fermentationmedium demonstrated that glucose and xylose are the major fermentable sugars in the slurry.The higher load of slurry (12%) represents a higher content of carbohydrates and potentiallyhigher end concentration of ethanol. Moreover, more lactic acid is produced with the lowerload of slurry (8 % or 10 %), presumably due to a result of a less inhibitory environment forbacterial growth. In this context, acetic acid sticks out as the most important inhibitor withconcentrations of 15.2 and 12.5 and 9.7 g/l respectively in the 12 %, 10 % and 8 % (ofsuspended solids) trials. Using pentose fermenting yeast may lead to higher ethanolproduction, lower xylose uptake and lower lactic acid formation.

It's not a secret that most companies strive to get such a high economic return as possible. To successfully engage in a profitable enterprise, there are many elements that come into play. An important element is the motivation of the employees and their work performance. Work motivation is a key factor for the employees to improve their performance and therefore determinant for the successes of the company.This work is a case study in the production at Fresenius Kabi, Uppsala. The work is based on an employee survey that they fill out once a year and the aim is to develop a deeper understanding for these questions and how the employees see on leadership, communication and goal-setting as motivators and how these factors works in the company today.To get this deeper understanding I have used a qualitative approach.

This paper consists of a comprehensive look at the advertising industry as a whole and communication mould various guises in the context of technology development. It also describes a production in the form of a commercial for a network of ten companies called The Lodge. The result is discussed based on questions on the subject communications and marketing. The discussions of this work will then be transferred to a proposal for further research..

The idea of using algae in different areas and exploring its possibilities is nothing new. Already in the early 1950s microalgae was explored as a possible food resource because of its high protein content. Lately there has been an increased interest in its potential for industrial use. Wastewater treatment is a possible use of algae since the algae grow well on the nutrients present in the water. This offers the possibility to grow algae for nutrient reduction and use the biomass for energy or animal feed since many alga species has a good nutritional value. Approximately 800-1000 m3 water is applied per 1000 m2 of greenhouse area during one season in a tomato production.

A growing interest for the climate and the environment has led to an increased interest forenvironmentally friendly and renewable energy sources, such as biogas. Planning new biogasplants requires a decision basis including facts about approximate amounts of biogas possibleto produce at the plant. The purpose of this thesis is to develop a model that calculates theapproximate biogas and digestate production from a planned or existing biogas plant.Developing the model required a literature review and studies of calculations concerningbiogas and digestate production performed by WSP Sweden AB. As a complement to themodel development, facts about substrates for biogas production were compiled through aliterature review. In addition the methane potential from selected materials was determined bybatch experiments.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.