Natural disasters are becoming more common due to climate change and it is important to adapt the society and its infrastructure to withstand events such as extreme rainfall. Precipitation is an important climatic factor affecting the transport and annually generates the cost of millions in damages, over the past 40 years heavy rain has increased and will continue to increase in the future. The extreme rainfall that occurred in Kramfors municipality in September 2013 led to flooding and destroyed several roads, including highway 90, which recently both had been rebuilt and given a new stretch of road. Extreme rainfall had also occurred in the municipality earlier.  The aim of the thesis was to examine how the Swedish Transport Administration handles new knowledge gained after natural disasters and how this is used in the planning of new roads.

Today there is a limited demand for quality certified cereal in Sweden. The demand can in the future increase and become a requirement for the entire market. Since the first of January 2005, grain producers in Sweden are food producers and traceability is important for the food industry. It is possible for grain producers to certify the productions under the certification IP SIGILL. The purpose of this essay is to explore why some grain producers continue to be certified while other producers end the IP SIGILL certification.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

The environmental assessment system Miljöbyggnad is a Swedish system initiated by Bygga-Bo-Dialogen to assess buildings with regards to three main areas; ?Energy?, ?Indoor climate? and ?Materials?. A building can obtain three different classifications depending on how well it manages to meet the demands. GOLD is the highest classification and is followed by SILVER and BRONZE. The majority of the measures needed to comply with the demands are done during the design phase.

The Swedish building contractor JMRegion Öst would like to to investigatethe possibilities of developing andstreamlining the production of singlefamilyhouses. JM are producing singlefamilyhouses with prefabricated framesat a rate of about two houses per week.During construction, the different tasksare performed by JM?s own productionstaff but also by varioussubcontractors.When examining the schedules of recentlyproduced projects, it appears that allthe houses are more or less completedeight weeks before the customer moves into the house. During those eight weeksseveral operations are conducted such asinspections, installation of appliancesand cleaning procedures. The inspectionperiod constitutes between 25 and 35% ofthe complete construction period.By conducting interviews, it has beendiscovered that this final phase is anessential security buffer for delays anderrors that often occur.

The aim of this thesis in Archival Science was to explore the concept of electronic archives and the challenges that might be encountered when attempting to move archives into a new digital age, as well as having a closer look at the term e-archive itself. Another aim was to explore how the OAIS reference model works in practice.To explore these questions I decided to do a case study on E-Arkiv Stockholm, a functioning e-archive. I decided to do a study on several documents that were created throughout the project, these included documents related to the planning of the archive, as well as the final report. My reason for this method was that these docu-ments came straight from reality and would give a clear and unbiased view of the project and it?s many aspects.Examination of the documents showed that the OAIS reference model and its concepts had been the foun-dation of much of the planning.

This master thesis presents a Model for Evaluating and Managing Interruption Risks in connection with Business Continuity Planning (BCP), developed for Swedwood International. The model consists of a template with instructions. The model should be easily understood and useful for establishing a plan for BCP. This is achieved by including the contents and procedure of BCP and the main supplychain risks in the model. The purpose of a BCP plan is to describe how an enterprise will return to business as usual after an interruption, e.g.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Rapporten är ett examensarbete på 20 poäng och utgör avslutningen på min utbildning till teknologie magister i fysisk planering (180p). Arbetet har gjorts under hösten 2000 och vintern/våren 2001. Inledning Samspelet mellan stad och land är en förutsättning för ett långsiktigt hållbart samhälle, men ofta framställs landsbygden med sina mindre tätorter som oviktiga och betydelselösa och de flesta små kommuner kämpar hårt mot stagnation. För den breda allmänheten är dessa kommuner främst en temporär rekreationsplats. Utredningen vill medverka till att stärka och medvetandegöra landsbygdskommuners betydelse i allmänhet och Torsås kommun i synnerhet. Utredningen har valt att analysera hur landsbygdskommunen Torsås kan uppnå en positiv framtidsutveckling och arbetsmetoden är även tillämpbar för andra kommuner. Arbetet belyser även den krassa verklighet som idag råder vid nya detaljhandelsetableringar, där marknadskrafterna i princip har fritt spelrum och där resultatet ofta blir stagnerande stadskärnor och landsbygdskommuner. Syfte Syftet har varit att utreda vilka förutsättningar som finns för en framtida handelsutbyggnad i Torsås kommun och att belysa det komplexa samspel mellan olika faktorer som krävs för att nå en positiv handels- och samhällsutveckling.

The purpose of this study is to examine how risk is perceived by the urban architect's in the region Dalarna, as well as how this is reflected in their everyday work with risk and decision- making according to urban planning. The ambition is also to show how their risk awareness could be improved. The study is written in cooperation with Länsstyrelsen Dalarna as a part of their regional long-term goal to improve the region's proactive risk' and crisis management. The study is based upon 12 semi-structured interviews with local urban architects conducted during the summer and autumn 2007. The result shows that some architects are motivated for working with risk and think that risk awareness should be integrated in their everyday work, while others are not motivated and think that risk is more of a passing trend.

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

Business is changing and so are society?s expectations. Companies are expected to take responsibility for their trade and the context they are operating in, by looking at socially, economically and environmentally aspects. Many companies handle it by implementing corporate social responsibility (CSR) to their line of action. This is often handled by collaborating with other organisations, such as non-governmental organisations.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..