The construction industry depends on functioning logistics; if the logistics isn?tworking the construction site will risk to be interrupted due to material shortages orproblems with deliveries. Despite this, the construction industry is battling logisticproblems daily. This problem is very time consuming and costly for the companies.These theses are written for Peab Bostadsproduktion and investigate if it is possibleto focus on logistics earlier in the building planning process to reduce the problemsthat occur. Peab has partnerships with three companies that could be helpful for themin the work of reducing logistic problems.

In Sweden according to the planning and building Act municipalities have planning monopoly. The question about shopping centres in the outskirts of cities is a regional issue, because they attract customers from a large area. Municipalities often find it hard to assert themselves against large commercial companies when it comes to their establishing new retail outlets on the outskirts of cities. Without a regional co-operation there is a risk that municipalities can be played up against one another, so that more and more companies are given permits without the municipalities having taken the strategic consideration necessary for a long term sustainable development. The focus in this work is on four municipalities in the Södertörn region (Södertälje, Botkyrka, Huddinge and Nynäshamn).

Bakgrund: Lean Production uppkom som ett verktyg för att sänka kostnader och därmed öka konkurrenskraften på en allt mer hårdnad marknad. Synen på processtänkande och dess möjligheter har under senare årtionden ökat markant i intresse, däremot har ekonomisystemen inte förändrats i samma takt. Granlund (2001) menar att trots det starka trycket att förändra kalkyleringen använder många företag sig fortfarande av traditionella påläggskalkyler med direkt lön som fördelningsbas. Kaplan & Johnsson belyste redan 1987 problemet och argumenterade för hur traditionella kalkylsystem ger en allt för aggregerad och snedvrängd bild av verkligheten. Den debatt som uppstod är känd under namnet Relevance Lost.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system..

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Examensarbete, civilekonomprogrammet, Ekonomihögskolan vid Linnéuniversitetet, ekonomistyrning, 4FE03E, VT 2013Titel: Lean Productions påverkan på ekonomistyrningen - En fallstudie inom Gnutti   Powertrain ABBakgrund: Allt mer konkurrensutsatta marknader har inneburit att företag sökt nya sätt att utveckla och effektivisera sina verksamheter. Detta har resulterat i att många företag valt att införa produktionsstrategin Lean Production. Flera forskare har påvisat att den traditionella ekonomistyrningen inte är anpassad till och lämplig för företag som använder produktionsstrategin Lean Production. Detta har inneburit att den traditionella ekonomistyrningen måste förändras och utvecklas för att kunna stödja de förändringar som den nya produktionsstrategin ger upphov till. Därmed blev det intressant att studera ett enskilt fallföretag för att identifiera om och hur detta företag har förändrat sin ekonomistyrning till följd av användandet av Lean Production. Syfte: Syftet med denna studie är att utifrån det enskilda fallet Gnutti Powertrain AB bidra med en förståelse för hur ekonomistyrningens utformning och användning påverkas av användandet av den avancerade produktionsstrategin Lean Production.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Climate change is expected to lead to increased rainfall and higher temperatures, among other things. This will have a major impact on our cities. Floods can lead to property damage as well as damages to human and animal health. Higher temperatures will increase the frequency of heat-related health risks and premature deaths. The consequences of climate change will be particularly large in our cities because of the city's morphology with a high amount of paved surfaces and buildings that affect the natural processes in areas such as drainage and absorption of solar radiation.

Examensarbetet formulerar förutsättningar för ett samtida stationssamhälle utifrån utvecklingen av stationssamhällen utefter järnvägsdragningarna på 1800-talet och dagens förutsättningar. Arbetet är indelat i fem delar. Den första beskriver uppkomsten och utvecklingen av stationssamhällen fram till idag. I del 2 beskrivs det samtida stationssamhället utifrån historien och dagens förutsättningar. Beskrivningen utgår ifrån de tre ledorden som är viktiga i utformningen av samhället; rörelse, mötesplats, blandning.

The purpose of this developmental research was to test the new way of working when the students were to take part in planning of cooking during the lessons in home and consumer studies, because the aim of the school is to teach the students to take the responsibility for their studies. The two first lessons should be used by students in the group to plan and organize their meal. During the third lesson the students must be responsible for cooking ready their meal and afterwards they must evaluate the results. The results of this new way of working was new for the students and they thought it was fun to be responsible for cooking during these lessons in home economics. The students in the groups were of wixed ability and they developed their knowledge from the levels of their ability.

The Sheep is the oldest livestock, and has been in Sweden for 4-5000 years. Thanks to that you can obtain skin, as well wool and meat. Therefore it was an important animal. Sheep production has increased, strongly lately due to the pasture support. The purpose of this paper is to find out what kind of different EU-subsidies you can get and to compare the subsidies in Öland and the main land. Sheeps are very good conservationist with grass, bushes and herbs, because of different grazing lands hardness and growth is it important to control the pasturage strain. A good way to regulate this is to have different enclosed pasture to switch between. I have been studying the different EU-subsidies.

Farmers are constantly facing changes, and the exposure to risk requires monitoring these changes. Financial risks, institutional risks, market risks and production risks are the different risk categories that the farmers face. Production risks stems from factors the farmer cannot affect or is beyond his control. The crop?s output is the basis for the primary income of agricultural operations, which is why it is important for farmer to manage their production risk. A tool to reduce the consequences of production risks is crop insurance.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.