The probiotic bacteria Lactobacillus reuteri DSM17938 was evaluated as a starter culture in cheese production, with the intention to produce a new interesting product within the functional food market. Growth and acidification rate in milk subjected to different heat treatments, as well as supplementation with growth promoting factors or support cultures was measured during controlled fermentations. The results showed that the weak proteolytic activity of L. reuteri could be compensated for by supplementation with 1% casamino acids or 5% MRS broth. Furthermore, a decrease in growth and acidification rate could be seen when using yoghurt culture or Lactobacillus delbrueckii as adjunct cultures.

In the coming years, organic food waste will be collected in the region of Gästrikland, Sweden. The collection is planned to cover the entire region by the end of year 2007. To start with, smaller amounts are being collected and transported to a central composting plant in Sala. However, a central composting plant in the region of Gästrikland is projected.The objective of this thesis is to evaluate a number of possible methods for composting of organic food wastes regarding their environmental impacts and localization.There are four scenarios for future composting of organic waste that have been evaluated. There are two that consist of membrane composting, either in Sala or in the region of Gästrikland.

The tourism industry is a young industry in Sweden but important for the economy and a large part of the field is mountain tourism. Marketing a place is called destination marketing, which has become a huge phenomenon and an important part of efforts for promotion in the tourism industry. The entrepreneurs in the tourism industry are an important part, as these are a big part of the destination. Their marketing and communication becomes a force to reckon with in order to attract tourists to the area. The purpose of this study is to examine how entrepreneurs through destination marketing reach their target market and with the intention to identify marketing channels that the entrepreneur uses.

CSR, Corporate Social Responsibility, has become increasingly important in a globalised world where the responsibilities of companies and governments are somewhat blurry. The textile industry is an industry where long supply chains and raw material production in developing countries are factors adding to the complexity and difficulties of solving ethical issues. Cotton production faces many environmental, social and financial challenges in the value chain. Therefore this case study takes a closer look at five Nordic home textile companies, Ikea, Hemtex, S Group, Moko and Finlayson, and how these companies choose their cotton related CSR tools and communicate their work on this area. These companies are of various sizes and therefore the resources for CSR work are also different, as well as the perceived values for working with CSR.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

The purpose of this paper is to give examples of different ways of economic planning and calculation within agriculcture. My aim is to use a couple of them as an explanation of a case from reality. My choice went to budgetsimulation and balanced scorecard since those are best suited in this specific case. In the information retrieval I present different instruments of economic planning like theory of cost, budget and productcalculation. The budgetsimulation describes how to use the different methods in a long term economic planning. The balanced scorecard is also a model of longand short-term planning but besides the economy planning it?s also a reminder of your personal goals. In the model I have used a dairyfarm as a case.

Recent years there has been discussed how the critical situation in the housing market threatens the Stockholm region's growth. The thesis objective is to examine whether there is a scientific link between the lack of housing supply and growth. The thesis also intends to identify solutions for increased housing construction, for instance by examining the conditions for a greater regional perspective and influence on the region's housing supply. The thesis empirical study is based on semi-structured interviews with representatives from the Government, municipalities and the housing industry.In Sweden, research on the relationship between housing shortages and growth has not been conducted to that extent it can be said to exist scientific evidence regarding the growth threat. However, in Britain and the U.S, empirical studies show that a lack of housing supply has hindered growth through negative impact on countries' gross domestic product.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

Språkliga och kulturella skillnader kan leda till komplikationer i den textila tillverkningen med tanke på att kommunikationen mellan beställare och producent ibland kan missförstås. Syftet med denna uppsats är att undersöka hur man, med hjälp av avancerad fotografi, kan förenkla den sömnadstekniska kommunikationen mellan producent och leverantör. Framtagningen av resultatet har gjorts med hjälp av kvalitativa intervjuer med två experter inom områdena fotografi samt produktion. Det har även utförts intervjuer med en inköpsassistent på ett stort internationellt svenskt modeföretag och en intervju med designer/inköpare vid ett mindre företag. Det har vid sidan av intervjuer utförts experimentella observationer där framtagning av en fungerande manual för 360° fotografering har skett.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

Denna rapport är resultatet av ett examensarbete utfört vid Luleå Tekniska Universitet på uppdrag av Hägglunds Drives AB i Mellansel. Hägglunds Drives AB är tillverkare av kompletta hydrostatiska transmissioner för industriella driftapplikationer. Företaget har arbetat med att skapa produktionsflöden enligt principerna för Lean Production sedan 2006. Uppgiften för examensarbetet består av att utföra en värdeflödesanalys och målet är att finna ekonomiska, tidsmässiga och arbetsmiljömässiga förbättringar inom: ? Flödet ? Kapitalbindning ? Förenklad planering ? Minskat slöseri ? Sänkta lagernivåer De flöden som ingått i analysen är cylinderblocksflödet och kamringsflödet.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.