Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

The producers of grain in Sweden are facing a rough future. The competition is getting harder all the time, in Sweden, in EU and also from the ?world market?. The producers have to be more efficient and have to have bigger units. Many producers might have to look for new alternative production opportunities.

Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

Forest fertilization had its peak in the late 60´s, when almost 200 000 ha was fertilized annually. The silviculture of today has high demands for timber production at the same time as the demand for nature conservation increases. It means that it?s necessary to produce more volume in smaller areas in the future. The use of DGPS equipment has in modern forestry in Sweden become more and more common.

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

In relation with structure transformation in farm companies with bigger animal population and pressure at the milk price, the farmers in both countries have to invest more money in the company to endure. This had conduct what more owners had seen grown requirements to invest in bigger population barns. The investment is necessary to retain stability in the economy for the companies, at that time when the profitability for small production barns decrease. This essay carries out through a case, there the activities main part are milk production. The present operation consists of 82 milk cows in long stall with a yield on 10 500 kg ECM. The idea is that the company should increase the activity to 180 cows.

The objective of this study is to determine if and how Swedish businesses measure the efficiency of their purchasing departments.In this study I have interviewed six medium to large successful companies and asked them· Which ratios they use to measure the efficiency of their purchasing departments· Why they use these ratios and· How the results of these measurements are usedI can conclude that although there are no ratios or other measurements that directly measure the efficiency of purchasing indirect measures do exist.The measures applied are usually the result of demands from management and the results are reported back to management and used to follow development within a particular field of purchasing. Benchmarking, especially external benchmarking, is unusual..

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

Abstract: The purpose of this study was to examine the Swedish industry- and craftmanship trade, specifically the relationship between effort and reward and how it affects the meaningfulness during labour hours. Also, what are the possible effects on Production efficiency as a whole? Discussed and analyzed through empirics and previous research.38 workers filled out a survey and two interviews were conducted to get a more analytic depth to the data.The results showed that there is little to no reward for high effort during labour hours on the evaluated workplaces, combined with low commitment and meaningfullness. My conclusions are that more ways of effort-based rewards would likely have a positive effect on meaningfulness and thereby the production as a whole. I also show that the theses of Karl Marx are still plausible and relevant in modern day industrial- and craftsmanship trades in capitalist countries..

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

This quantitative study explores how employee perceived efficiency within customer service is affected by standardized routines, digital tools, and motivational factors. The study is based on survey data collected from 42 employees across five customer service departments in a larger organization. The theoretical foundation integrates Weber?s bureaucracy theory, the Technology Acceptance Model (TAM), and the Job Characteristics Model (JCM), allowing for a multidimensional analysis to capture the employees' experiences of efficiency. Findings reveal a statistically significant positive relationship between perceived efficiency and both standardized routines and perceived digital tool usefulness and ease of use. Furthermore, the study identifies that skill variety and task significance are positively correlated with experienced meaningfulness, which indicates a potential mediating relationship between these motivational aspects and perceived efficiency.

The purpose of this study was to examine whether urea could be an option as a nitrogen source for young cattle, the study was limited to risks related to feeding, growth and feed efficiency. Microbes in ruminants have the ability to convert nitrogen to protein, this has been highlighted by beef producers as they are in search of cheap protein feed resources. Urea can be a worthy source of nitrogen for growing young animals, because of its high nitrogen content and the low price. Studies have shown that the replacement of a portion of the total protein content by urea in diets with low content of crude protein, like corn silage, may improve animal growth and feed efficiency. Replacement of all the true protein with urea can result in reduced feed intake and microbial growth.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

To value the risk and opportunity for our production in Sweden it is necessary to understand the marketing development for beef cattle production in the world. We have chosen to look at the Brazil beef cattle production. They are one of the biggest producers, have good opportunity to develop further and have a big affect at the world market. The method of our work is to gather information from experts of beef cattle production, located in Brazil. We have also gathered information through studies of literature. The factors that will have a big influence at the Brazil beef cattle production during the upcoming years is more efficient land use, lower age of slaughtering and extended use of feedlot-system. Our conclusion is that the Brazil beef cattle will have a sharp increase during the next five years. The amount of pasture will not change during that time.

Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.