Sökresultat:
3551 Uppsatser om Production efficiency - Sida 32 av 237
Förbättring av Egenvärmehus : En fallstudie av ett flerbostadshus, Kv. Fyrtornet
Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.
String Theory : att spela jazz pa? harpa
This master thesis is about the production of the record ?Brutus? with the band ?Trilobit?. Trilobit consists of the three musicians, myself, Stina Hellberg Agback on pedal harp, Simon Sva?rd on guitar and Karl Jansson on drums.During the production, I have analyzed different aspects of my own musicality and also the role of the pedal harp in jazz. I have found techniques that have simplified chromatic movements on the pedal harp, and also techniques that has developed the rhythmical aspect of my improvisation.I have also looked into my process in improvising and composing and developed new aspects, many thanks to the close collaboration with Simon Sva?rd..
Verksamhetsstyrning fo?r lokaleffektivisering inom kommunal verksamhet : ? En fallstudie av Halmstad kommun
Title: Management control of facility efficiency in municipalities - A case study of Halmstad municipalityLevel: BachelorSeminar date: 2012-05-31Authors: Markus Nilsson & Sara MattssonAdvisor: Sven-Ola CarlssonKey words: Control management in municipality, facility efficiency, management by objectives, internal rents and incentivesBackground: The public sector owns and manages a large property portfolio and in the municipalities, the properties are always a big cost item. Because of the outside world changes and the public interest, the properties should be used as efficiently as possible.Purpose: The purpose of this paper is to describe how control management of facilities looks like a municipality. The paper also seeks to explain how employees work to make the facilities more efficient in a municipality.Methodology: The authors use a qualitative method with open interviews.Theoretical perspectives: The choice of theory was made with the field of management control and facility efficiency in mind. The theory therefore includes management by objectives, internal rents and reward systems, motivation and communication within organizations.Empirical foundation: The organization has undergone a reorganization 2010/2011. There are no clear incentives to reduce facility costs.
Optimerande av gasanläggning - genom värmeåtervinning och förlustreducering. Gässlösa Reningsverk
The municipality, of Gatukontoret in Local government of Borås has in the long run, a required need to look after the current heating devices (the gas production plant) in sewage treatment plant, called Gässlösa. The practical work of the examination is about, trying to find a better way to take care of the current heat recovery. That may be one way or another, rather easy to implement in the existent construction.Through the work to increase the efficiency of the gas engine, implement of some external cooling system by heating exchange device. That gives an opportunity to heat (primary) the digester, (but even all internal public areas) with its own superfluous heating.The report shows that if the management group may invest 422 704 crown to implement a heat exchanging device, it gives more space to reduce the need to buy expensive external energy. Gatukontoret´s pay off time, for buying machines, is 20 years, with reservation to calculate with 4 percent internal interest, leads to the yearly mount of 31103 crowns.If Gässlösa increases the gas engine time in (effective) duty approximately (correspondingly) 48 hours a month the entire investment will generate a profit in January in year seven after the implementations.
Maasai herding and milking strategies : a case study of goals and decision-making within the household
In Kenya the Maasai pastoralists have based their livelihoods on dairy production and the production goal is to maintain a sufficient milk supply throughout the year. The pastoral dairy production has two vital characteristics; breeding and milking. Traditionally, breeding is the men?s responsibility, while milking is the duty of women. Depending on this partition of chores between men and women, they also have different management routines, ambitions and strategies regarding the milk production.
High Cereal Prices : An analysis of the causes behind the increase in the world market price of corn, rice and wheat.
The purpose of this study is to examine which factors played an important role in the food price crisis of 2007-2008. Theories used are Microeconomic theory, explaining changes in supply and demand, and Macroeconomic theory, explaining the impact of changes in exchange rate on prices. A theory regarding speculation is also used to explain the impact of speculative activities effects on price. The method used is multiple regression analysis in order to determine the effects which ethanol production, oil price and dollar exchange rate had on the surge in the price of corn, rice and wheat.The data used is in monthly observations during the period 2005-2008. However, other factors are taken into consideration during the study, such as production quantity, stock size, economic growth, speculative activity and population growth.
Effektivisering av produkionsflödet för stora cylinderrör på Företaget AB
This study was conducted in autumn 2008 on the Company AB, which is currently in a growth phase. The company manufactures hydraulic systems for the heavy vehicle industry and has annual sales of approximately 250 MSEK with 165 employees.The rapid growth and unchanged planning is the starting point for this report. It all began in 2005 when the company received an unusually large order. During this period, the first priority was to satisfy customers and all other focus was disregarded. This has primarily resulted in a messy production and long throughput times.
Riskkapitalbolag : En analys av hur den svenska riskkapitalmarknaden påverkades av IT-haussen
Most of the clothes sold in Europe today are produced in developing countries where the production costs are lower. The exploitation of the developing countries has led to that the inferior working conditions in these countries have attracted attention from media and NGOs. Globalisation makes company activities more transparent and the absence of transnational laws calls for alternative regulations. Many companies in Europe has since mid 1990s developed codes of conduct to satisfy the demands of external and internal stakeholders. EU also brought Corporate Social Responsibility to it?s agenda in the beginning of the 2000s and subsequently signals of approaching laws were given.
Vem styr mitt arbete? Förändrade arbetsuppgifter vid datorisering av körschema
Abstract
This report is our bachelor thesis. Our work has taken place at a galvanising
company in Sölvesborg. The company faced major changes, of which one was a
computerisation process. The new system could involve changes in work practice
and in specific tasks, affecting the workers. If the coming system was to
support work, from the production personnel?s perspective, we felt a legitimate
participation in the development and design of the future work practice, was a
requirement that was not met.
During our ethnographical studies we noted that conflicts arose between
production and administrative -personnel.
Evaluating six crop mixes used for game fields in southwest Sweden : biomass production, fallow deer preference and species diversity
Game fields are one way to divert animals away from sensitive areas, create shelter and forage, and also to increase the biological diversity. In this study I investigated how the plant composition in six different crop mixes used for game fields affected the biomass production, biomass consumption and biological diversity at the Koberg estate in southwestern Sweden. Six experimental fields were used and each field contained six plots, approximately 1500 m2 each, that was sown with a different crop mix. The crop mixes ranged from a pure grass mix (A), 70 % grass and 30 % leguminous plants (B), 53 % grass, 21 % leguminous plants and 26 % other herbs (C), 100 % leguminous plants (D) to the most complex mixes constituting of 91 % leguminous plants and 9 % other herbs (E) and 87 % leguminous plants and 13 % other herbs (F). The fields were cut weekly during the summer in 2010, to estimate weekly biomass production.
Grovfoder för dikor
This literature review examines different forages which are well suited for suckle cow production in Sweden today. They should also be possible to cultivate in Sweden under the current circumstances. Crops suitable for grazing in Swedish climate but not used in Sweden today, but which may be relevant for Swedish conditions are also mentioned. In Sweden today, mainly grass silage, straw and hay are used as forage, but also wholecrop silage is used to some extent. However, concentrates are not used to a greater extent, since it contains too much energy.
BSCI : Ett europeiskt initiativ till standardisering av socialt ansvarstagande
Most of the clothes sold in Europe today are produced in developing countries where the production costs are lower. The exploitation of the developing countries has led to that the inferior working conditions in these countries have attracted attention from media and NGOs. Globalisation makes company activities more transparent and the absence of transnational laws calls for alternative regulations. Many companies in Europe has since mid 1990s developed codes of conduct to satisfy the demands of external and internal stakeholders. EU also brought Corporate Social Responsibility to it?s agenda in the beginning of the 2000s and subsequently signals of approaching laws were given.
Miljö- och samhällsekonomisk analys av behandling av biologiskt avfall
Biogas is a renewable fuel that can be extracted from anaerobic digestion of many differentsubstrates, for example biological household waste. An alternative handling of the waste is tomix it with other wastes and incinerate it in a combined heat and power (CHP) plant. Thisstudy uses life cycle assessment to investigate which type of waste handling that is betterfrom an environmental point of view, anaerobic digestion with biogas production orincineration. The results are based on a case study of a biogas production plant owned by thecompany Ragn-Sells in Vänersborg. The alternative is incineration at a CHP plant inGothenburg.
Fodder to ruminants within agroforestry systems in Rwanda - species and management
Rwanda is one of the poorest countries in the world and about 70-80 % of the population lives in rural areas. The land is strongly affected by land erosion which makes it difficult for the agriculture and food production. Agroforestry is a system where tree plantation is combined with livestock- and crop production. The system provides soil fertilization and binds the soil together. Some of the trees used in agroforestry systems are also used as fodder.
Uppnå användaracceptans genom interaktionsdesign : med CRM-system som applikationsomåde
The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.