The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

This thesis calculates and compares the values of improved environmental quality due to future possible investment alternatives in biogas production facilities at Käppalaförbundets Reningsverk (Käppala Sewage Treatment Works) in an attempt to determine which alternative yields the highest such value. Käppala faces three investment alternatives for the usage of biogas. The alternatives are production of vehicle fuel, district heating and thirdly, heat and power production. Estimates of the value of environmental change are calculated for each of the three investment alternatives, and these estimates are then compared. The environmental change in question is the change in discharge levels of carbon dioxide (CO2), nitrogen oxides (NOx), sulphur dioxide (SO2) and particle matter.

This is a heuristic evaluation of Umeå university library?s Online Public Access Catalog (OPAC). It makes use of four of Nielsen?s ten heuristics, flexibility and efficiency to use, match between the system and real world, visibility of system status, and aesthetic and minimalist design. The evaluation was done by having 3 evaluators inspect the interface individually, as per Nielsen?s (1990) recommendation of 3-5 evaluators.

When the storm Gudrun hit Sweden on the 8th and 9th of January, many recreational forests in southern Sweden blew down. For this reason there is a demand for new regeneration methods as to how these storm-felled areas should be regenerated and with what species. In this study the forest is divided into three areas: production, recreation/production and recreation. The first area is a forest with production as main goal and these kinds of forests are located a bit from the city. The second type ? recreation/production forest ? has two equal goals: production and recreation, and is located close to the city.

Environment friendly transports are one of the main topics in the industry and society today.Shell organizes an annual university competition called Shell Eco Marathon. The goal is to buildthe car that consumes the least fuel during a race. KTH participated for the first time in 2006.The engine for this competition, DoubleTwo, has been developed within the school. Theprinciple is a two stroke counter piston HCCI engine with variable compression ratio. HCCIstands for homogenous charge compression ignition.

Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

BackgroundThere are different organizational structures and control and it has been proved difficult to find a combination between these that leads to goal congruence and improved efficiency. An organization can be structured according to hierarchical levels and the decision making can be either centralized or decentralized. Organizational control can be classified according to the amount of rules and balanced scorecard can be used to weld together the structure with the control.PurposeThe purpose is to create an understanding of how two types of structures and control in an organization appears and also to investigate how these differ from one another concerning the balanced scorecard as a control system. We will also investigate how the variables goal congruence and efficiency are affected by the implementation of the balanced scorecard.MethodTo answer the purpose of this thesis we have mainly used the qualitative method since we have studied two organizations thoroughly through interviews on different levels of the organization. The study also has some quantitative elements since we wanted to get a more truthful picture of the organizations.

Lao People?s Democratic Republic (PDR) is a country where the majority of the population works within the sector agriculture in one way or another. The number of goats are increasing and the animals can be an important income source for families. However, during the dry season, lack of feed is a great problem for the farmers. Fodder trees have shown great potential as dry season feeding, due to that the trees often hold green and fresh leaves a long time into the season, compared to grass that dry out quickly.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

With an IT outsourcing project there are many factors affecting how efficiency andquality develop in the outsourced activity. The Purpose of this study is to identifythese factors through a case study in a global company that is dissatisfied with theefficiency and quality of their outsourced helpdesk. For data collection methodsinterviews and observations were used. Interviews were conducted with people fromdifferent parts of the company in three different countries, all somehow involved inthe outsourced system. The observations were made with the outsourced company tosee how the employees work and fill information gaps that the interviews could notcover.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Due to the technical development the enterprises of today are forced to creative thinking when it comes to marketing of their products. An example of one of these new methods are the development of product placement which has come to an interesting turn namely advertiser funded programming (AFP). Instead of the product just being a small part of the storyline it has become the story itself. The purpose of this study is to analyse how the advertiser funded tv-production Roomservice, a Swedish home styling program, communicates with it?s viewers as well as how they perceive the message.