Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

Efficient energy use in restaurantsUmeå Municipality wishes to combine energy issues with food control, and thus help restaurants to become more energy efficient. During March and April 2010, I visited seven restaurants and interviewed restaurant personnel about current state and application of kitchen appliances, using a checklist to make sure that the same questions were asked at all restaurants. The restaurants were all different sizes and offered different kinds of food. The study mostly focuses on energy efficiency by behaviour and not on location or technology. Almost every restaurant that was visited had the potential to improve in one or more areas, such as kitchen appliances, lamps and lighting fixtures, heating, cooling and ventilation.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

In recent years the concern about the future of the European Union and itssupposed lack of democracy, efficiency and legitimacy has increased. Thisconcern has resulted in extensive debates and the establishment of a conventionwith the task to create a draft treaty for a European Constitution.The aim of this essay is to study how the three theoretical concepts,democracy, efficiency and legitimacy, have been described and used in the debateabout the future of the European Union. My main interest is to see how theseconcepts are described in a debate regarding a political system that goes beyondthe borders of the nation-state. I have made a comparative textual analysis of thedebates taken place in Sweden and Spain during a period of over two years. Ihave, for instance, found out that openness and clearness have a prominentposition as democratic values together with equality and justice (in Spain) and theinstitution of accountability (in Sweden).

Drinking water from drilled wells has a high content of iron and other minerals in many places in Sweden. Questions about the association between the quality of drinking water and the health of dairy cows are regulary asked both by advisers and dairy farmers. There are so far not many studies published about the relevance for high iron content in water and dairy cow health and production. Therefore, the aim of this study was to investigate if there is a connection between the iron content in water and the health of dairy cows. Initially a literature study was made about iron and it´s function in ruminants.

The study is based on a new approach on how Swedish healthcare is supposed to be controlled and organized. There is a renowned administration problem within Swedish healthcare, which seems to be an obstacle to exploit the resources to the fullest. The latest venture within the healthcare system is patient involvement, where the patients become co-producers of their own care, which aims to both improve and make healthcare more efficient. A few wards in Sweden have implemented this new approach whereupon the study intends to discuss the effectiveness and efficiency in some of these.The study is restricted to three wards, whereof two of these are inpatient wards and the other one is an outpatient ward, within the medical clinic in Jönköping County Council, which has implemented the patient involvement approach in their daily work. The methodology for this study is qualitative in its nature where a time study of personnel time allocation and supplementary interviews with managing nurses on the wards have been conducted.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

The purpose of this report was to compare Lilluns egg production with other Swedish egg producers based on the flow of nutrients (nitrogen, phosphorus and potassium) in the egg production systems. The main focus in the report was the utilization rate of the forage and the excess of nutrients per kg egg. Additionally, the purpose was to identify the environmental impact from Lilluns egg production and compare the results with other egg producers. The inflow of nutrients associated with forage and poultry was compared with the nutrients that were exported from the production. All of the egg producers in this study had an excess of nutrients.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

Detta examensarbete handlar ?Verklighetstrogen Effektskomposition?. Målet med arbetet är att undersöka och utnyttja alla de olika aspekterna som gör att en film med specialeffekter känns så verklighetstrogen som möjligt. Arbetet handlar om de olika delarna i en filmproduktionsfas så som pre-production,production och post-production. Filmen som skapas är en specialeffektsbaserad hemmavideo som har som syfte att vara så chockande som möjligt i förhållande till vad man förväntar sig när man börjar kolla.

Sustainable beef and milk consumption. The consumption of beef and dairy products in Sweden is high. A lot of greenhouse gases are emitted from the production of these products. The production of beef in Sweden has decreased but the import has increased. The number of dairy cows has decreased while beef-production with suckler-cows has increased in Sweden.

Today's unsustainable resource use is influenced by many factors. One key factor isproduction methods and patterns. Trough change of production patterns enterprises can bepart of the solution to a more sustainable society. This case study has analyzed environmentalperformance of the printer company Edita Västra Aros Ltd (EVA), who has gained awards forits environmental work, and what driving forces they have had during this work. The survey isbased on a qualitative method and the collected data consists of documents and staffinterviews, which have been analyzed with content analysis.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

The study is based on a new approach on how Swedish healthcare is supposed to be controlled and organized. There is a renowned administration problem within Swedish healthcare, which seems to be an obstacle to exploit the resources to the fullest. The latest venture within the healthcare system is patient involvement, where the patients become co-producers of their own care, which aims to both improve and make healthcare more efficient. A few wards in Sweden have implemented this new approach whereupon the study intends to discuss the effectiveness and efficiency in some of these.The study is restricted to three wards, whereof two of these are inpatient wards and the other one is an outpatient ward, within the medical clinic in Jönköping County Council, which has implemented the patient involvement approach in their daily work. The methodology for this study is qualitative in its nature where a time study of personnel time allocation and supplementary interviews with managing nurses on the wards have been conducted.

Responsible production is a subject of increasing importance for companies toadopt and communicate to their environment and many companies choose to implementenvironmental ? and ethic considerations into their brand strategy. There is, however, adividing line between companies according to what extent they choose to implementresponsible production into their brand strategy and to which extent they choose tocommunicate it to their stakeholders and surroundings. It is the hypothesis about a dividingline that is the foundation for this essay and something we believed could be interesting forfurther analysis.The purpose of our essay is to find out how the brand strategy of a company is affected by theresponsible production and in what extent they communicate it to their environment. Byanswering those questions we hope to find out why some companies communicateresponsible production more actively than others.We have conducted in-depth interviews with the Swedish clothing companies; MariaWesterlind, Zion and Dem Collective and we have through our analysis reached interestingconclusions.