Watching television (TV) has been given a new meaning, you don?t have to book a specific time, a specific date if you don?t want to miss the program you were planning to see. In Sweden now days we can watch TV in lot of different ways, whenever we choose to do so. In this thesis I attempt to explain and document the process of shaping a tvformat, the development and adaptation to a time when the TV medium is in a change. Plus a look at how the television audiences relate to their use of it.

Production requires the input of capital and labour. Hence, economic growth can be assumed to follow from increased levels of these two factors. Policies aimed at increasing production may consequently successfully be focused on facilitating the accumulation of capital and labour. However, even when an economy has managed to reach the same quantities of input factors as a more prosperous neighbour, the level of the production might still differ. The explanation of this lies in what economists refers to as expression embracing the characteristics of the input factors and the conditions in which they operate.In this thesis a calculation of total factor productivity is carried out, using existing data on the Swedish FA-regions between 1990 and 2005 and the method the economist Robert Solow in the 1950?s.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the Production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the Production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

As for today, a large quantity of protein feeds is imported from other countries to be used in the Swedish dairy production. The main import is soya from Brazil. The soya-production in Brazil results in negative consequences for the natural environment in the area, and the long transport of the feeds requires a lot of energy. The organic dairy production in Sweden is, with the highest probability going to be forced to use 100 % organic feed to the cows in the year 2005, due to new EU-rules. These are some of the causes why there are reasons to look closer at the possibilities to feed Swedish cows with only Swedish feeds. In this study, I have looked at the KRAV-rules for organic feeding, where the goal is feeding with only KRAV-approved feeds.

The purpose of this paper is to survey the textile based proto-industrialism in Sweden in the middle of the 19th century. This case study is founded upon Anders Hansson?s pre-industrial textile production at the estate of Mölneby, Östra Frölunda in the rural district of Kind in the province of Västra Götaland.Account books from the year 1853 related to Anders Hansson?s wool fabric manufacturing have been looked into and categorized using a quantitative research method. The research has also been supplemented with a number of interviews.The result of the survey shows that Anders Hansson?s business activities fit into Mendel?s theory of proto-industrialists at a practice level.By collaborating with a merchant in Gothenburg the fabrics were traded in unknown markets, as well as in more familiar neighbouring districts.

The purpose with this essay is to study how a micro enterprise builds a brand. This because the current situation makes it difficult to stand out from the vast amount of marketing messages available in the market without having an extensive marketing campaign. Small companies do not have the opportunity to put a lot of recourses as money into marketing as the large companies do. Neither do they afford to repair a brand failure.Brand building is a process that constantly is in progress in a company, large or small. To make this process concrete we have chosen to study the four factors; brand awareness, perceived quality, brand associations and brand loyalty.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

Introduction: Every year about 450 women in Sweden are diagnosed with cervical cancer, almost 200 die and thousands undergo surgery because of cell changes in the cervix. A HPV infection can lead to cervical cancer and therefor costs for the society. The implementation of a vaccination program against HPV is a way to avoid these costs. Aim: The study aimed to calculate the economic impact of the HPV- vaccination program for children in Sweden through a cost-benefit analysis. Method: In this analysis, status quo was compared with non-administration of the HPV-vaccine for the selected cohort of ten-years-old girls in Sweden.

The soil acidification and the pH-value of the soil have been discussed for many years. Many observations of the tree species effects on the soil pH have been done. We have discussed the effects on the soil surface pH-value with a birch (Betula spp. L.) admixture in Norway spruce stands (Picea abies L.).We have used data from the Swedish National Forest Inventory. We have also discussed how the wood production and the biodiversity can be increased in mixed stands, in according to the Swedish forestry act Skogsvårdslagen. Our sampling areas are located in Norrland, Sweden. The results show a significant correlation between an increased birch admixture and an increased pH-value of the soil.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas emissions in the atmosphere. Reducing costs will also help maintain business competitiveness.Scania in Södertälje is a company where the optimization of energy use is an ongoing and continual process. One area with potential to make energy and cost savings is the effectiveness of the ventilation systems in offices and industrial premises at Scania. During the summer months an increased demand for cooling occurs, leading to increased ventilation and a peak in district cooling system usage. Sorptive cooling is a technology where the supplied air is cooled by applying external heat.

Insufficient intake of vegetables is a reason for micronutrient deficiencies and malnutrition in developing countries. With urbanization, globalization and a growing world population it is of major importance to secure sufficient food supply for the world?s population. Part of the solution to increased food security among the world?s poor could be the introduction of vegetable home gardens, plots for small scale vegetable production which can provide households with sufficient vegetables as well as serve as an extra income source. The study Improving peri-urban home gardens aims at examining the existence of vegetable home gardens in the peri-urban areas of Hyderabad, India.

Title: The component approach - From the harmonization process as a background to the perception of benefits and costs as effects.Authors: Elin Börjesson & Emma KarlssonTutor: Titti EliassonKey concept: Harmonization, Component approach and Benefit/CostBackground: With IFRS for SME's as a basis, the Accounting Board developed K3 which shall apply from financial year 2014. Upon introduction of the K3 companies will be forced to apply the component approach. When K3 with the associated component approach went out for consultation it resulted in a debate where some actors opposed the imposition of a requirement and not an option. It was questioned whether the costs with the component approach would be greater than the benefit of the implementation.Formulation of the problem: How is the introduction and use of the component approach seen by different operators from a benefit-, cost perspective?Aim: The aim of this essay is find out how the introduction and use of the component approach is seen by different operators from a benefit-, cost perspective.