Study objects: Three different productions companies which the authors have chosen to be anonymous. Purpose: The purpose with this study is to examine why production companies choose to use 3D-animations in television commercials, and what different kind of aspects affects their decisions. Theoretical: The theoretical chapter reviews the history of 3D-animation andtelevision commercials and other fields that will be relevant laterin the analysis and discussion. Method: A case study has been made on three different companies, two of the companies are active in post-production and the other one is active in the consulting area. Data was collected through semistructured interviews with two of the companies.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

Utländsk arbetskraft konkurrerar allt mer om arbetstillfällen i form av lägre löner och produktionskostnader. Detta gäller inte minst inom bygg- och anläggningsbranschen. Ett sätt att effektivt minska kostnader är att undersöka hur eventuellt slöseri kan undvikas. En filosofi som fokuserar på detta är Lean Production som allt fler företag i bygg- och anläggnings-branschen försöker arbeta enligt. Svensk Markentreprenad AB är ett ungt, växande företag som strävar efter att arbeta effektivare.

Abstract Our intent with this study was to find out what changes have been made during the last 30 years in the way that the media reports from certain events. We choose to study the world of football and specially the Swedish national team and it?s relationship to the Swedish television medium in the World Cup of 1974 and the World Cup of 2006. The study mainly focuses on the differences in commentary and in the production from both of the championships. We used Keith Selby and Ron Cowdery?s book How to study television and Mats Ekström and Lars-Åke Larsson?s book Metoder i kommunikationsvetenskap as tools to analyze the games we watched. The result showed that there?s been a lot of changes media wise between the two championships.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

The project, Glowtest Fixture, has been carried out to and in collaboration with MSA SordinLtd. MSA Sordin Ltd produces and sells ear protector and is at present a supplier on theworld market. Glowtest Fixture is a product for glow testing off detailed components in oneear protector. MSA Sordin Ltd sends today away your products for testing what is anexpensive aspect in their development. The project's aim is to take forward a test equipmentthat copes with those high nonplussed requirements and wishes that are required for anapproved physical execution.Glowtest Fixture is a physical equipment that comes used stem glow physical off all detailedcomponents in one ear protector.

This document presents calculations of adjusted GDP based on satellite household accounts for the year 2001 with the purpose to compare adjusted and official GDP for Sweden, Germany, Estonia and Finland. Household production in each country is estimated using time use survey data from Eurostat and a monetary value is estimated using average wage (after taxes) for each country. The results indicate that the value of household production using this methodology increases GDP with between 42% (Finland) and 55% (Germany) compared to official GDP statistics. A comparison of GDP/capita between the countries included in the study shows that the GDP/capita in Germany increases more that the other countries due to the relatively high proportion of time used for household production (mainly German women) combined with a high average wage. In fact, the results show that Germany has higher adjusted GDP/capita than both Finland and Sweden (but Germany has lower GDP per capita when official statistics is used for the comparison).

The rise in prevalence and severity of obesity and related diseases imposes increasing costs on society. The objective of this thesis is to discuss and estimate the possible effects of a so-called fat tax as a tool for minimizing these costs. Two alternatives for differentiation of the value-added tax (VAT) on food are compared. The first alternative is an increase of the VAT levied on food containing saturated fatty acids. The second alternative is a subsidy on fruit and vegetables in the form of a VAT at zero percent, instead of today?s twelve percent.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

When I got the opportunity to write this examination did I want to write about something that I both was interest in and also can use in the future. I think it?s going to be difficult to carry on the milk production with only 28 cows. I wanted to investigate the possibility to increase the herd of cows. I also wanted to compare this cost with a new cow house the cows where milked with a robot.

The aim of this essay is to analyze how food and meals produce and reproduce values and power relations and how these processes are portrayed in Virginia Woolf?s To the Lighthouse. Using sociological writings in the field of food consumption and production I study the structures that affect our relation to food and eating. This perspective is combined with a phenomenological view, aiming to examine how food is perceived, which is also inspired by queer theories. Using the method of close reading, the theories are applied to Woolf?s work.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

Vilken strategi ett tillverkande företag arbetar efter kan variera och bero på en mängd olika faktorer. En effektiv tillverkning kan bli komplicerad när marknaden efterfrågar allt mer skräddarsydda produkter med varierande egenskaper. För att bemöta denna typ av komplexitet finns en rad strategier och modeller som har fått global spridning. En av dessa strategier är lean production, ett begrepp som vuxit fram utifrån studier genomförda på den japanska tillverkningsindustrin.I denna studie undersöktes varför lean production valdes som styrningsfilosofi i ett svenskt tillverkande företag, vilka förändringar detta inneburit samt vilka åsikter som fanns kring förändringsarbetet. Insamling av empiri har skett genom att genomföra en fallstudie på företaget Trioplast Sifab.

Data retrieved from airborne laser scanning represents a new source of forest data. Today, the technology has matured so that it can function in an operational environment. The aim of this study was to compile areas of application of laserdata in forestry. Moreover to analyze costs and accessibility of laserdata. The goal was to provide private forest owners information to support assessments of possible benefits of laserdata.

The purpose of this master thesis is to investigate how nearby forests affect the energy production in wind turbines. To reach the purpose a case study is performed on three wind turbines sited on a field in a north-south line at Andersfält in the municipality of Halmstad, Sweden. Approximately 100 meters south of the southern wind turbine a forest is situated. The case study is divided into three sub studies where the difference in energy production, the affect of the forest and a wind meteorology model, WAsP, is studied. The result show that the forest have a significant influence and that the WAsP-model gives an incorrect result of the energy production in wind turbines sited near a forest..