A number of studies have been made to examine several aspects of voice production in individuals with different types of hearing impairments. Most of the studies were made to explore the impact that hearing aids have for people with severe or congenital hearing impairment. So far it has been confirmed that there are changes regarding voice production in these individuals. A group that has not been investigated regarding voice production to a larger extent are hearing aid users with an acquired hearing impairment. In the present study the voice production of seven individuals, four men and three women, with a moderate acquired hearing impairment is examined.

This thesis analyzes the effects of export subsidies on Swedish cereal export. The analyzes are based on data on cereal export from Sweden to countries outside the EU from 1990 to 2003. In 1995 Sweden became a member of the European Union. Before the membership, the Swedish agricultural policy was decoupled in a larger sense than the European CAP was, which means that the Swedish producers had decreased their production more than the European farmers. When Sweden became a member of the EU the production started to increase again to an EU level.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

Reduced tillage has increased in Sweden during several years, primarily to decrease costs andincrease efficiency in crop production. Despite this, mouldboard ploughing is still the mostcommon primary tillage method on most farms. The aim with this thesis was to compare theuse of pesticides and the occurrence of weeds on ten farms in Skåne and ten farms inMälardalen that use different soil tillage systems. The object of the study was also to clarifywhy the farms had chosen their specific soil tillage system and the consequences it has had onweed occurrence and use of pesticides. The result showed a slightly higher use of pesticideson the farms that use reduced tillage.

With higher prices for oil and increased focus on fossil fuels impact on the environment the heating sector are searching for alternative fuels. Pellets are a quite new product whose production has risen exponential in recent years. Today there are small-, medium-and large-scale users, where the large-scale consumers are the heating sector. The heating sector is mainly using oil to cover the increased demand during cold periods. The purpose of this study is to analyze the potential of pellets if it would replace thermal power plants oil and coal. The study will also analyze the economic impact a conversion would mean for a heating plant and if the pellet is a reasonable substitute. 2008 statistics from the Swedish district heating association were analyzed and a calculation was performed to determine how many tons of pellets is needed to replace coal and oil.

This paper is finishing part of the two-year master programme in Industrial Engineering and Management.Initially there was an inquiry of studying the queue-times that Fläkt Woods uses when they break down internal working orders. These times were assumed to be too generalised and does not apply to the actual value of the queue-times which generates incorrect data and delivery delays. During the work of this paper it has been established that it is not the queue-times that is the biggest problem. The problem is the shop floor control and the lack of manufacturing the right products at the right time. Therefore an analysis of the production planning process was made to bring forward the real problems.

The economic conditions for Swedish dairy farmers are constantly changing. The numbers of producers are declining and the economic conditions for dairy production are weakening debilitating. To improve the economic situation for a farm a hired contractor is a possible solution since previous studies show that machinery cooperation may be beneficial for the farmers. The aim of this study is to examine the possibility for farmers to cut costs by hiring a contractor for harvesting silage. A comparison between using own machinery and hire a contractor is the starting point of this study. Another aim is to discuss the farmer?s decision process when achieving today?s situation and to determinate what factors affect their decisions. The study is based on cases selected from four farms that today have chosen not to or only to some extent, hire a contractor for harvesting silage.

Evaluating and choosing suppliers based on price alone, has traditionally been the dominant strategy for supplier selection within the purchasing function. With the origin of the Total Cost of Ownership (TCO)-concept in the early 1990s, a new philosophy dawned that promoted the importance of knowing the effects of supplier performance on the buying firm?s internal costs. Since then, scholars have been arguing the case of TCO as a viable model for making purchasing decisions and conducting supplier evaluation. Still, after two decades little is known about its penetration and impact on the practices of buying corporations, leaving the questions of which costs are included in the purchasing organisations? decisions unanswered, and even more importantly why certain costs are considered and others not.

Since the 1980s, companies have taken a larger interest in quality and it´s economic impact within the company. Having the knowledge that it´s not quality that costs money, but it´s rather the lack of quality. The work immerses itself in the field of cost of poor quality and the development of key performance indicators.The thesis is performed at Bufab Holding in Värnamo. Bufab Holding is a trading company which mainly buys and sells C-parts. C-parts include fasteners, other small metal-, rubber- or plastic parts such as wires, springs and electronic fasteners.The aim of this thesis was to make a survey of the cost of poor quality and to find key performance indicators (KPI) for cost of poor quality that can be continuously monitored.

The purpose of this thesis was to create a strategic/tactical road access plan. This was done by designing an analytical method which gives the road manager a template to create long-term road access plans. The analytical method will help to identify and appraise roads to be upgraded and give information when it is time for building new roads. The study method involved developing an analytical method. The method was comprised of five main parts: the harvest plan, analysis of the road network, transport costs, quality and storage costs and finally, identification of investment alternatives.

The main purpose of this thesis is to analyse the possibilities and problems facing a privatised work injury insurance. This discussion includes the element of premium differentiation. Todays´ Swedish social insurance system is ineffectively formed. The costs have dramatically increased during the 1990´s. The Swedish government is now looking for ways to improve the efficiency of the system.

A growing interest for the climate and the environment has led to an increased interest forenvironmentally friendly and renewable energy sources, such as biogas. Planning new biogasplants requires a decision basis including facts about approximate amounts of biogas possibleto produce at the plant. The purpose of this thesis is to develop a model that calculates theapproximate biogas and digestate production from a planned or existing biogas plant.Developing the model required a literature review and studies of calculations concerningbiogas and digestate production performed by WSP Sweden AB. As a complement to themodel development, facts about substrates for biogas production were compiled through aliterature review. In addition the methane potential from selected materials was determined bybatch experiments.

For a long time the Swedish forests were used by the landowner?s mainly for providing wood to the household itself. The wood was not, to a greater extent, considered a product to be sold. During the 1800s the industrial era led to a demanding need for wood in the industry and thus the use of forest, forest production kicked off. The forest production was not regulated by law, which led to a differentiated forest production over the whole country without consideration of re-growth.

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.