The automotive industry is increasingly studying lightweight solution in their designs, also rational production and low costs in materials and manufacturing methods are of great interest. This thesis consisted in the practical evaluation of anchors for sandwich panels. The object was to study loads of shearing and pull out of the plane. The experiments were carried out on panels made up of 1mm aluminium coatings and 50mm extruded polystyrene (XPS) at its core. As the fasteners used simple methods such as blind rivets, screw and glue.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.

This thesis examines Swedish filmmakers' modes of work and production within the Swedish film landscape. An introductory historical overview treats the Swedish regionalization since the mid 1990's. Political and economical aspects of producing films in various regions serve as a background for understanding the new generation of decentralised Swedish filmmaking, and the use of sound and music in contemporary film. The analysis consists of empirical studies; interviews with directors and producers, working with music for film and TV. Although the filmmaking perspective is in focus, composers and film scholars are heard as well.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

Detta examensarbete är det avslutande momentet för programmet ?Byggteknik och Design? på ?Kungliga Tekniska Högskolan? i Haninge. Arbetet utfördes för byggföretaget Einar Mattsson Byggnads AB. Uppgiften var att ta reda på varför kalkylerade och verkliga kostnader för nybyggnadsprojekt skiljer sig. Studien baserades på produktionskalkylerna för fyra projekt och ntervjuer med minst en inblandad från varje projekt.

This paper examines how organizations work with their recruitment. The organizations in thispaper are mined in the trade of recruiting and staffing. The paper will further influence howorganizations work or will work with recruiting through social medias. It describes therecruiting process in the traditional way and what costs it brings. The next part is a descriptionof network and the importance of networking in a general way.Our results demonstrate that social medias probably will stay as a complement to other moretraditional methods and will not be an own recruiting method.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This work consists of two studies. One is based on an inquiery to nurseries with production of woody plants, and the other on visits to gardencenters, primarily in Skåne but also in Stockholm. Inquieries where sent to 87 nurseries, 48 of them replied. The purpous of the inquiery was to make a thorough investigation of the ligneous production at the Swedish nurseries, what is produced and in what quantities. Within the inquiery was also a thorough look at the fruit tree production. This to be able to conclude what cultivars that are produced and how large part of that production that is certified according to the Swedish Board of Agriculture (SJV).

Genetic defects are caused by mutations in major genes where the gene?s protein product has a large impact on the physiology of the animal. The synthesis of the protein can be altered by a change in the nucleotide sequence, which can lead to malformation and in many cases death.One of the main reasons of increase in many genetic defects is the use of few bulls in breeding programmes, causing a reduction of the genetic variation. Genetic defects cause suffering for the animal and influences the production by, for example, increased costs due to misscarriages, lost milk production and expenditure for medical treatment. Bovine Leukocyte Adhesion Deficiency (BLAD) and Complex Vertebral Malformation (CVM) are two genetic defects that were widespread before the causative mutation was discovered.