A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Den ökade förändringstakten i samhället på grund av ny teknik, internationalisering och att samhället blivit alltmer mångkulturellt bidrar till att större krav ställs på företag att hela tiden förbättra sin verksamhet. Akzo Nobel Surface Chemistry, Production Surfactants i Stenungsund, har huvudsakligen sina kunder och konkurrenter runt om i Europa. Då Sverige ligger i utkanten av detta område tar det omkring en leveransdag längre tid för Production Surfactants att leverera sina produkter i jämförelse med företagets konkurrenter. Detta medför att Production Surfactants behöver kompensera denna längre leveranstid genom exempelvis högre produktkvalitet, större flexibilitet eller lägre priser för att ha möjlighet att tävla på marknaden. För att uppnå detta behöver Production Surfactants utveckla och systematisera sitt förbättringsarbete.

Lean has been studied intensely since the 1980s and it has been tested and successfully implemented in a wide variety of businesses. This thesis aims to examine the potential effects of a Lean implementation on meeting efficiency, a topic that has gotten little attention in the research community. First, a number of meeting problems are introduced, as they are perceived from the company that is the subject of the study. Second, the potential of introducing Lean in a meeting process is evaluated using the Lean Thinking principles. Third, the wastes that are generated from the meeting problems are identified.

Relationships and trust between humans create the psychosocial working environment. This is a basic human activity and is communicated in a continually ongoing process. Conciseness about the value of trust and social capital motivates the need for work, with threats to communication, being conflicts and noise. This can create greater trust in the workplace as a whole, as well in the working team. Scientists are increasingly interested in these social relations in the working environment; there are profits, both for production and in terms of individuals2019 well being, in shifting the focus away from a purely production-oriented, economic perspective.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

För att ett företag ska kunna hålla sig flytande på marknaden idag krävs de att de har hundra procent koll på vad som sker i deras fabriker och att de strävar efter en mer hållbar tillverkningsprocess. Att försäkra konsumenterna om att fabrikerna inte använder sig av barnarbete eller dåliga arbetsförhållanden räcker inte längre utan det krävs en bredare kunskap inom miljö och hållbar utveckling för att den trogna kunden ska stanna. Syftet med denna rapport är att kontrollera det nyuppstartade företaget DENIM IS DEAD?s produktion och utvärdera om hur man kan förädla de olika processtegen samt skapa transparens gentemot kund.Metoden som arbetet utformades efter var genom en fallstudie som är baserad på en mestadels deduktiv metod men med inslag av induktiv metod. Där grunden lades genom en utförlig faktainsamling för att i rapportens senare del kunna analysera de hypoteser och problemformuleringar som ställts.Målet med rapporten var att ta fram en metod eller produkt som ska underlätta kommunikationen med DENIM IS DEAD?s kund.

År 2009 startades det europeiska forskningsprojektet COST Action IS0804 med syfte att få mer kunskap om flerspråkiga barns språkutveckling och utveckla bedömningsmaterial anpassade för flerspråkiga barn. Inom COST Action fokuserar arbetsgruppen Narrative and discourse på berättelser (narrativer) som ett sätt att bedöma språk hos barn. Berättande liknar naturlig språkanvändning och anses ge en mer rättvisande bild av flerspråkiga barns förmåga än andra logopediska test. Av narrativgruppen utvecklades bedömningsmaterialet MAIN (Multilingual Assessment Instrument for Narratives). Med MAIN kan barns produktion och förståelse av berättelser undersökas på makrostrukturell nivå.

This thesis examines the emissions costs of Swedish aviation and their degree of internalisation under current economic instruments. The results show that the degree of internalisation spans from practically zero for a long-haul flight to 6 per cent for a typical domestic flight, where the climate cost, including high-altitude impact, makes up the main part of the cost. To inform evaluation of the consequences of this underinternalisation, or attempts to correct for it using price instruments, the price and income elasticities of international leisure air travel from Sweden are estimated using household expenditure data and two different price measures. The resulting elasticities are very high ? 2.03 or 2.04 for the income elasticity and -2.53 or -1.88 for the price elasticity ? and should be interpreted cautiously due to data limitations, especially for the price elasticities.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

The arm?s length principle has existed in Swedish law since 1928 but has previously been given little attention. In 2007, documentation requirements were introduced, and the government began to do tax audits regarding transfer pricing. This thesis examines how the documentation requirements and tax audits affect the application of the arm's length principle. The research consists of nine interviews with a total of ten people at the tax authority (Skatteverket) and audit- and consulting agencies. The results of the interviews are analyzed using the agency theory. Many companies are risk averse and prefer having correct transfer pricing instead of taking on challenging strategies that can be risky in case of an investigation by Skatteverket.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .