Sustainable beef and milk consumption. The consumption of beef and dairy products in Sweden is high. A lot of greenhouse gases are emitted from the production of these products. The production of beef in Sweden has decreased but the import has increased. The number of dairy cows has decreased while beef-production with suckler-cows has increased in Sweden.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.

The purpose of this thesis is to compare if a charter company's attitude and vision of service can be reconciled with the attitudes and visions that the customers have in the same area. In order to carry out the study a qualitative approach is used. The data has been collected by interviews, focus groups and observations. The framework is theories on the subject of customer satisfaction, quality of service at customer meetings, Self-Service technologies, quality assurance and gap in service.The study has concluded that the approach to service is relatively equal between the company and customers, but the future visions differ. Focus group participants have been thinking bigger and further into the future, while the company focuses more on specific functions.

The freedom of establishment is a fundamental right on the internal market which enables companies to take up and pursue activity in other member states, ?host states?, in a non discriminatory way. In situations where a company wishes to use the right to establish in a host state, complications will be discovered since the member states are applying different principles for deciding the nationality of a company. Since the Treaty of the Function of the European Union recognize both principles, and both of the legal areas company law and European international private law lack harmonization regarding companies wishing to perform such a transaction, the situation today brings the possibility that such a company could be covered by the legal system of several member states, or maybe no legal system at all.The Court of Justice of the European Union has through case law contributed to make the scope of the freedom of establishment a little bit clearer but there are still difficulties regarding situations when a company wishes to transfer its seat to another member state with a change of nationality. Today?s measures, for example the SE-company, is not enough to satisfy the companies wishing to transfer their seat to another member state.

Background: The business market today is characterized by tough competition amongst the competitors to capture consumers? interest and money. One marketing tool companies can use to achieve this is the company?s image. The customer buys not only a product, but also the image that the company or the product is associated with.

This thesis discusses taxation of benefits, which shareholders and company leaders can enjoy from close corporations. The Government said in the government bill lead- ing to the amendments regarding taxation of benefits, that it should be the possibility alone to enjoy benefits that should be the reason to impose taxes on company lead- ers. The Swedish tax agency (Skatteverket) has agreed to that statement. In other words, it isn?t necessary that someone actually enjoys the company?s assets for pri- vate use, it is enough that they have the right of disposal of them in order to be taxed.

Through a case study at an IT company we have attempted to ascertain how a company's organizational culture affects its designers' way of working. By examining what ?type? of designers the employees are and how this is reflected in their work, we hope to have correctly determined what their organizational culture looks like and thereby have achieved a plausible result in our study.Aside from two interviews with the company's CEO, we also performed eight observations at the company, where we tried to blend in with the employees, to better determine their way of working together.We have found that the designers' trust in their own instincts has led them to rarely act on feedback from clients ? they only pick out the proposals which have a ?mainstream? potential. We have also discovered that their design approach is something they don't feel inclined to discuss amongst themselves. As it is often ?indescribable?, they go with their intuition and unspoken design conventions..

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

How affected are the sugar production in Mozambique and Tanzania by EU sugar regime? What does the EU sugar reform constitute in these countries?Using theories regarding free trade and anti-free trade, I am able to answer these questions. The aim of this paper is to study how the various sugar agreements with EU affect the sugar production in Mozambique and Tanzania. Therefore I am using a method called a most similar system design in this comparative case study. The conclusion is that the EU sugar regime is the main reason to how the sugar productions in developing countries are.

Holmen Paper is one of Sweden?s leading manufacturer of paper, with two Swedish production facilities located in Norrköping and Hallstavik. The European continent constitutes the company?s largest customer base which makes the company?s distribution system an integral part of the business. Historically, much of the produced paper has been transported by vessels, as vessels allow large volumes of goods and deliveries to markets which are difficult to reach with other modes of transportation.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

FYROM has a long tradition of producing wine. Wine production in FYROM is one of the greatest contributors of the agricultural share of their GDP. The aim of the thesis is to see if the wine production in FYROM has a comparative advantage compared to other countries that produce wine and if FYROM is able to sustain the advantage in the future. The countries chosen for comparison are Bulgaria, Croatia, France and Italy. The methods used in the thesis are the Balassa Index and Porter?s Diamond of National Advantage.

For Swedish companies to compete with low wage countries, developments in theproduction industry moved towards streamlining the entire company. One of themost effective ways for a company to streamline their operations is to review theirproduction. All companies have processes in their production that add no value tothe product. In order to compete, they must be eliminated.The purpose of this report is to reduce work in process (WIP) in the flow ofbashus at Volvo Powertrain in Köping. The aim is also to try to find reasons whyVolvo Powertrain feel that they have problems with the storage principle First in-First Out (FIFO).To meet the objective, empirical studies were conducted at the company whilethe literature in the area was studied.

This report describes and explains the development of a comprehensive solution including visual identity, print catalog, website and online shop for the furniture company Resize Design. The development and production of these have occurred in the iterative processes with relevant theories as a basis. The theories include user-centered work processes, usability, design principles, interaction design, design patterns and web-compatible solutions. The report documents and discusses the work which is divided into different phases. .