The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

For the company to work well, it is necessary with a good economy, a high qualitative production and a well working system concerning the environment: the whole cycle on the farm needs to be working. At the same time, debaters about the environmental impacts are also requiring higher demands for the dairy farmers and therefore also the management programs. Management programs for feed evaluation calculations have been more developed over the years. Big amounts have been invested in the new feeding system with NorFor, but no one seems to have asked the dairy farmers what they themselves want to spend their money on, and what they need help with. For the dairy farmers it is necessary that the whole company is controlled in the right way, and much more than just feed evaluation is included in this.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..