The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

FYROM has a long tradition of producing wine. Wine production in FYROM is one of the greatest contributors of the agricultural share of their GDP. The aim of the thesis is to see if the wine production in FYROM has a comparative advantage compared to other countries that produce wine and if FYROM is able to sustain the advantage in the future. The countries chosen for comparison are Bulgaria, Croatia, France and Italy. The methods used in the thesis are the Balassa Index and Porter?s Diamond of National Advantage.

The Swedish processor Findus contracts approximately 500 pea producers annually to secure the company?s supply of green peas for human consumption. A production contract, which has had roughly the same design for decades, regulates the relation between Findus and the pea producers. Agriculture is typically a risky business. The main sources of risk in agricultural production are production risk and price risk.

 AbstractTitle                                      Continuous improvement ? Motivating ICA´s  personnel to    a greater engagement.Problem                                  Getting ICA: s employees involved with continuing improvements.Purpose                                  To motivate ICA: s employees to a higher degree of commitment and    contributing with ideas and embracing approved improvements. Research questions   - How should the employees be properly motivated to contribute with   suggestions for improvement?  - What message and content should improvements send to inspire the   employees? - Witch channels should be used to capture the employee?s attention? - How can best practice be recognized and how can the knowledge be spread  through the organization?Methodology                          Initially a theory study was completed and from the results a case study were  conducted.Conclusion                             Combining success factors for continuing improvements.  To get the      employees feeling appreciated with their work. Results             By combining ten sucessfactors and trying to see the whole picture.                .

The study explored how a model for conversation partner trainingworked for family members of people with Parkinson's disease. Participants inthe study were three dyads consisting of persons with PD and their carers. Thepurpose of the study consisted in finding out whether the participantsexperienced a change in communication after the intervention, and in findingout if this potential change could be observed in the conversation. The resultsshowed that 4/6 participants experienced an improvement in communicationafter the intervention. This improvement was however not observed in theconversation.

The main part of the goats in the world is located in developing countries, whereas active breeding programs are mainly restricted to Northern America and Europe. Goat milk can be processed to several products and goat cheese is the main product. An organized breeding program is carried out in France and Norway but is not present in Sweden. Important selection traits for milk producing goats include milk, protein and fat yield along with protein and fat content. Functional traits have been more important the past years and they have large economic importance for the farmers.

Det fenomen som varit föremål för den här studien är psykosocial arbetsmiljö. Fenomenet har undersökts med inriktning på tillverkningsindustrin och organisationsformen Lean production. Studien syftar till att erhålla en djupare förståelse av hur medarbetarna i den här specifika kontexten upplever den psykosociala arbetsmiljön. De frågeställningar som studien ämnar besvara är:-Vad innebär en god psykosocial arbetsmiljö för medarbetarna i organisationen? -Hur upplever medarbetarna den psykosociala arbetsmiljön i organisationen? Studien genomfördes med ett induktivt förhållningssätt.

AimThe aim of the present study was to study possible evidence for shock wave therapy on pain and function in patients with plantar fasciitis.Questions1. Does shock wave therapy reduce pain in patients with plantar fasciitis?2. Does shock wave therapy improve function in patients with plantar fasciitis?MethodA systematic review of the literature was performed in the databases PubMed, EMBASE, Cochrane and Cinahl.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

Atlas Copco Tools is a world leading company in tool manufacturing. The productionin Tierp works hard to improve their assembly to maintain its position. This thesis isa part of their improvement efforts to be a more Lean production.The main focus for this thesis was to identify the material flow in the kanban system,which used to supply the assembly groups, focusing on the material flow to assemblygroup 9 and the assembly group 3. Group 3's material flow within the kanban systemwas perceived to perform better than the group 9. The handling of kanban materialand their working methods in the two groups was identify those differences whichaffected the kanban system.As an alternative material supply a study were done in kiting.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

Continuous improvement is one of five principles in General Motors ? Global Manufacturing System (GM-GMS). GM-GMS has been used by Saab Automobile AB since 2003 and is a central component for realisation of GM?s vision. Internal audits have discovered problems with one of the tools, practical problem solving (PPS), which needs to be improved.

In ambition to produce more and better harvests, artificial fertilizers are used to produce a better growth of crops in the agriculture landscape. This contributes to leakage of nutrients. Our forests also exhibit a leakage of nutrients. Air pollution contributes to more nutrients. High precipitation with high water flows as a consequence seems currently to occur more frequently in the county of Halland.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.