The aim of this literature review is to give an overview of the differences between pure- and crossbreeding systems. Crossbreeding is a mating system with individuals of different lines or breeds. It is one of several breeding strategies in dairy production used to increase the economic profit. The use of crossbreeding increases due to changes in the dairy market and an increase of inbreeding among purebred Holstein. The main benefit of crossbreeding is heterosis, which is the improvement in genetic level in a hybrid offspring above the average of the parent breeds.

Hallstaviks papermill is an industry plant within Holmen Paper. Hallstavik is a mechanical mill and produce newspaper and journal paper. During year 2000, Hallstavik used approximate 1.200 m3f spruce, either as logs or chips from sawmills. Due to that the production is running continuously the mill also needs raw material at the same rate. At some periods the supply of raw material cannot keep up pace.

The purpose of this study is to carry out a follow-up study of the reading stimulating project Arts in Reading. The project was in progress between the years 2007 to 2009 in Sweden and nearly 80 librarians from 57 public libraries participated. The aim of the project was to initiate new methods fot how to stimulate reading for children. The promoters of the project wanted to initiate the use of new art forms in the work for reading promotion, encourage more collaboration with new actors in the culture area, and co-operate more with the children.The aim of the present study is to investigate to which extent Arts in Reading really succeeded in establishing its goals, whether new methods were brought about, and how this work was done. Another aim is to find out how librarians in public libraries work to develop children's reading.The theoretical framework is based on Ragnhild Söderbergh's term inculturation, Elisabeth Björklund's research on how children acquire literacy, and Lev S.

This is a study, the purpose of which is to investigate how the construction company Sefab Bygg AB is able to increase its profitability and render a more efficient production process through logistic solutions. The study is made during one of Sefab´s present projects. The project includes sanitary renovation of 650 apartments in the co-operative Opalen in Norrköping.To find out whether changes of logistic routines are profitable or not, it?s necessary to evaluate the total cost of the changes. A total cost analysis is a mapping of all the costs for a particular material, on one hand for the present situation and on the other after the change.

Boliden Mineral Ab's mine in Garpenberg, Dalarna is going through a massiveexpansion. The annual ore production is being increased from 1,4 million tons to 2,5million tons in less than two years period of time. Along this expansion thedepartment of mining techniques is administrating a project of optimizing the shortterm planning for the mining production. Garpenberg have since mid 90s storedinformation from all mining processes in a database.The information consists of time data from all the different activities required in themining process, for example charging, blasting, loading etc. The database also containstime data of delays that are affecting the production.

Lean production härstammar från företaget Toyota och Taiichi Ohno?s begrepp ToyotaProduction System. Metoden är idag ett dominerande styrmedel bland organisationer. Därmedhar konceptet implementerats i allt fler västerländska resultatstyrda organisationer, varsparametrar för kontroll skiljer sig mot de lean production utgår från. Dess innebörd sträckersig över stora delar av en organisation, vilket bidrar till begreppets komplexitet.

Study objects: Three different productions companies which the authors have chosen to be anonymous. Purpose: The purpose with this study is to examine why production companies choose to use 3D-animations in television commercials, and what different kind of aspects affects their decisions. Theoretical: The theoretical chapter reviews the history of 3D-animation andtelevision commercials and other fields that will be relevant laterin the analysis and discussion. Method: A case study has been made on three different companies, two of the companies are active in post-production and the other one is active in the consulting area. Data was collected through semistructured interviews with two of the companies.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

This study was a degree in Master of Science in agriculture with specialization in animal science for the Department of animal nutrition and management at SLU. The subject was created by AS-Faktor, a small company for science and development within the company Lantmännen AB. It was a test of the effect of SPC (Special Processed Cereals) on induction of the endogenous protein AF (an antisecretory factor) in plasma and intestinal lumen in broilers. Previous results have shown positive effects on different intestinal diseases in pigs, horses, dogs as well as in humans. Beside the induction we also studied the effects on results in a conventional slaughter chicken production, including the ability of SPC to compete with or be affected by the coccidiostat, Salinomax.When diarrhoea occurs, it's because there is an imbalance between the secretion and the absorption and it can be caused by for example toxins.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

Bakgrund: Hypertoni är en folksjukdom och är en starkt bidragande orsak till sjukdomar som stroke, hjärtsvikt, kranskärlssjukdom och arterioskleros. En effektiv läkemedelsbehandling mot hypertoni reducerar kraftigt insjuknande och död i dessa sjukdomar. Mer än 50 % av patienterna som behandlas för hypertension, slutar helt sin behandling inom ett år från att diagnos har ställs. Bland de som fortsätter sin behandling är det endast hälften som är följsamma det vill säga tar 80 % av sitt förskrivna antihypertensiva läkemedel. Syfte: Syftet med denna litteraturstudie var att undersöka vilka faktorer som påverkar följsamheten till medicinering hos patienter med diagnosen hypertension.

Recent studies show that the knowledge in and understanding of science, technology andmathematics of Swedish junior high school and high school students is decreasing. As a resultof this the Swedish government has initialized several studies, research and reforms. One ofthe theories for teaching that today is seen as effective is the socio-cultural perspective and itsdescendants, including scientific inquiry. Using the pedagogy of the socio-cultural perspectivefour assignments regarding the human body was constructed for junior high school studentsattending summer research school in the summer of 2008, hosted by AstraZeneca. Theassignments follow a structure (goal of assignment, preparations, experiment and follow-up)inspired by the concept of NTA ? Naturvetenskap och Teknik för Alla (Science andTechnology for everyone).

Ethanol produced from lignocellulosic biomass has the potential to become a promisingalternative to gasoline. In this work the simultaneous saccharification and fermentation (SSF)technology was applied for ethanol production from hardwood with focus on cell growth,ethanol production and contamination.The SSF was performed at PH 5.5 and 35°C for different suspended solid concentrations(8%, 10% and 12%) of pretreated birch slurry which contained 16 % total suspended solids.Two different hexose fermenting yeast strain (Ethanol Red) and pentose fermenting yeaststrain were used.Quantifying the concentration of chemical components and metabolites in the fermentationmedium demonstrated that glucose and xylose are the major fermentable sugars in the slurry.The higher load of slurry (12%) represents a higher content of carbohydrates and potentiallyhigher end concentration of ethanol. Moreover, more lactic acid is produced with the lowerload of slurry (8 % or 10 %), presumably due to a result of a less inhibitory environment forbacterial growth. In this context, acetic acid sticks out as the most important inhibitor withconcentrations of 15.2 and 12.5 and 9.7 g/l respectively in the 12 %, 10 % and 8 % (ofsuspended solids) trials. Using pentose fermenting yeast may lead to higher ethanolproduction, lower xylose uptake and lower lactic acid formation.