Sök:

Sökresultat:

3601 Uppsatser om Production Follow-ups - Sida 29 av 241

How do you measure culture? -A case study of result control within the Gothenburg Opera

Problem The culture sector is characterized by qualitative goals which raise questions such as how do you measure culture and what is ?good? culture? Both the goals and the measurements tend to result in subjective judgments, which according to the theory make result control inefficient. Yet, result control is frequently used in the culture sector; which leads up to our research question: What characterizes the problems of result control in the culture sector?Purpose The aim of this study is to make a survey of how the Gothenburg Opera works with result control and follow-up. By defining how it tackles the different problems, which could arise with result control in a non-profit organisation, we aim to map how the problems regarding result control are characterized in the Gothenburg Opera.

Svenskt Sigills kvalitetssäkring av spannmål :

Today there is a limited demand for quality certified cereal in Sweden. The demand can in the future increase and become a requirement for the entire market. Since the first of January 2005, grain producers in Sweden are food producers and traceability is important for the food industry. It is possible for grain producers to certify the productions under the certification IP SIGILL. The purpose of this essay is to explore why some grain producers continue to be certified while other producers end the IP SIGILL certification.

Värdeflödesanalys och förbättringsförslag på Pallco AB : Value stream mapping and improvement proposal at Pallco AB

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

Flödesoptimering på sjukhuslaboratorium: En praktisk implementering av lean

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

Kulturevenemang på folkbibliotek

This thesis examines art exhibitions, literature events and music events in public libraries in Sweden. The aim is to study which event occurs most in the libraries in Sweden. I also examine who takes responsibility for the events, who the libraries engage, how much the events cost, and how often the libraries have the events. I also study Swedish cultural politics in purpose to see if the libraries follow the aims and directions decided by the Swedish government. One aim of the Swedish culture politic is to give every citizen in Sweden the same possibility to experience culture, no matter where they live.

MILJÖCERTIFIERINGSSYSTEMET MILJÖBYGGNAD I PRODUKTIONEN : En fördjupning inom området ?Material?

The environmental assessment system Miljöbyggnad is a Swedish system initiated by Bygga-Bo-Dialogen to assess buildings with regards to three main areas; ?Energy?, ?Indoor climate? and ?Materials?. A building can obtain three different classifications depending on how well it manages to meet the demands. GOLD is the highest classification and is followed by SILVER and BRONZE. The majority of the measures needed to comply with the demands are done during the design phase.

Småhusproduktion : Utvecklingsmöjligheter hos JM AB

The Swedish building contractor JMRegion Öst would like to to investigatethe possibilities of developing andstreamlining the production of singlefamilyhouses. JM are producing singlefamilyhouses with prefabricated framesat a rate of about two houses per week.During construction, the different tasksare performed by JM?s own productionstaff but also by varioussubcontractors.When examining the schedules of recentlyproduced projects, it appears that allthe houses are more or less completedeight weeks before the customer moves into the house. During those eight weeksseveral operations are conducted such asinspections, installation of appliancesand cleaning procedures. The inspectionperiod constitutes between 25 and 35% ofthe complete construction period.By conducting interviews, it has beendiscovered that this final phase is anessential security buffer for delays anderrors that often occur.

Utvärdering av effektstyrningssystemet EnergiDirigent® ur ett miljöperspektiv

Energy Director is a control and measuring system for energy consumption and is part of the product portfolio of E.ON AG for more efficient use of energy, offered to business customers. As of today, the system has only one parameter of control, namely power, and the objective of this essay has been to investigate whether other ones could be added. The emphasis is on the environmental perspective, which is why carbon dioxide has served as an example for this parameter in question.Parallel with the study of Energy Director electricity on the margin, calculations of carbon dioxide equivalents and also the Swedish trade of electricity have all been highlighted. Results indicate that when reductions in energy are made it is endorsed to omit from electricity on the margin rather than some mean distributed electricity, under certain conditions, and in addition the calculations of the reductions should be modified regarding the efficiency of the power stations fuelled by lignite and bituminous coal. Sweden practices trade with the Nordic countries as well as Poland and Germany.

The Way We Produce : Möjliga kvalitetsförbättringar på Atlas Copco

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

Cystisk endometriehyperplasi/pyometra-komplexet hos hund : orsaker och patogenes

Virulent strains of Staphylococcus hyicus produce exfoliative toxins and cause a potentially fatal skin disease in piglets known as exudative epidermitis. Vaccines and antimicrobials are used to control the disease. Antimicrobial resistance and the prevalence of several different toxin genes and toxigenic strains make it problematic. The aim of this literature study was to identify potential differences between countries and between healthy and diseased pigs regarding antimicrobial resistance and toxin-producing strains. Great differences could influence vaccine production, treatment strategies and surveillance programs.

Identifiering och uppföljning av kvinnor med postpartumdepression : Distriktssköterskors och barnmorskors uppfattning

ABSTRACTBackgroundPostpartum depression (PPD) occurs in 10% of women who have recently given birth. Postpartum depression is treatable but unidentified and untreated it could lead to serious consequences. There are multiple instruments for screening available. The Edinburgh Postnatal Depression Scale is the most frequently used and is regarded as the best instrument. AimThe aim of this study was to analyze to what extent and how midwifes and primary care nurses identify mothers with symptoms of depression respectively PPD.

EKONOMISTYRNING I EN MOTORVERKSTAD: En analys av centralt ställda krav ur ett operationellt perspektiv

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Motivationsfaktorers relevans för medarbetarna på Sörmlands sparbank Vingåker : En kvalitativ studie

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

Statusbedömning av asynkronmotorer

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

Höftledsdysplasi och armbågsledsartros hos labrador retriever med känt radiologiskt status av höftleder och armbågar : en tredje uppföljande studie

Joint-related diseases including hip dysplasia (HD) and elbow arthritis (ED) can in advance cases lead to that the dog has to be put down, and these diseases are also the cause to expensive veterinary treatments of many large breeds, including Labrador Retrievers. The aim of this study was to make a follow-up study on the 271 Labradors, who previously participated in a study on the effect of nutrition and exercise on hip and elbow status in a birth cohort born year 2000. That study investigated the relationship between nutrition, exercise, and HD and ED. A follow up study on the same dogs at 5-6 years of age investigated the clinical effects of the radiological hip and elbow status at 1 years of age and if was effected by body condition score. This study took place in 2011-2012 and 187 Labrador retrievers participated.

<- Föregående sida 29 Nästa sida ->