This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

It appears that it has never been easier for the marketer to create and distribute advertising messages. The technical development has created new possible channels, which in addition to the traditional advertising media has resulted in consumers encountering loads of commercial messages every day. Unfortunately for the marketer, the overload of messages has contributed to an extensive advertising avoidance. This forces him to think outside the box in order to come up with attention-grabbing and innovative methods to reach out to consumers. This paper aims to examine if facilities for group exercise classes at fitness centres could be a potential advertising medium due to the unexpectedness of encountering advertising in those premises.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

AbstractPolitical Science, level III thesisSpring semester 2010Author: Emelie AlfredssonSupervisor: Tomas Mitander"A Changed Leadership? - A study of the EU leadership from a institutional standpoint, related to multilateral environmental negotiations"The EU has for a relatively long time considered itself a leader in the environmental policy area as a whole as well as in multilateral environmental negotiations. This study attempts to classify and identify the European leadership with the purpose of relating it to the institutional framework of the Union. The treaties of the European Union decide its ability to act and its institutions the right to engage in different policy areas, the environmental area being the focus of this study. With the recent ratification of the Lisbon treaty this study aims to make out if the type of leadership the Union showed during the Kyoto negotiations has changed with the new treaty, into a new type during the COP-15 meeting in Copenhagen.

SNA Europe?s handsaw concept is called ?Bahco Handsaw System? and is constituted by a saw handle with the possibility to switch between different saw blades. The sales of ?Bahco Handsaw System? products have not achieved the desired results probably due to the high price. Developing a more cost efficient handle, enabling a lower consumer price of the product, is assumed to increase the sales volume.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

Brämhults Juice AB is one of Sweden?s leading producers of fresh fruit juices and drinks. The fruit drinks last 3 days once opened and when stored in a refrigerator kept at 7°C. Since factors that shorten the drinks? best before date are usually not noticed until the entire batch has expired, it would be advantageous to find a way to accelerate the drinks? natural deterioration, so that an unusal short best before date is noticed before more products are shipped off to the stores.

In this project the task has been to develop a product that will facilitate an operation for personnel working in a sterilization center. The operation is to steer the front of a loading trolley into the chamber of an autoclave, a so-called docking. The moment is complicated because the margins to deviate from ideal docking position and still succeed, is very small.The principal Getinge's desire was that the product could be retrofitted at the customers on their existing systems. One of the demands was that the product should fit two types of trolleys, one with a adjustable working height and one with a fixed working height. Getinge is supposed to purchase the system from a subcontractor who shall manufacture it and the requirement from Getinge is that the cost of purchase mustn't exceed SEK 500Initially principles, solving the problem was developed.

Playsam in Kalmar AB are world famous for their design of the toys they sell. Together with their CEO Carl Zedig the goal was to find a new product for the company.  The process has far from been linear, I started off in one direction, got rejected, turned another way and we finally decided to create a rocking horse in a De Stijl style. At the same time taking consideration of the demands from Playsam and myself.Playsam?s products are archetypes of ordinary objects around us such as the car or the aeroplane. The company mainly produces its toys in wood and the stylized shape together with the blank painted surface has become a hallmark for them.De Stijl, the Dutch art movement containing artists, designers and architects such as Piet Mondrian, Theo van Doesburg and Gerrit Rietveld.

In nature there are about 4,500 minerals identified. These can roughly be divided into two groups, opaque phases and non-opaque phases, with the exception that some opaque phases also may act as a non-opaque phase in different circumstances. The division is made on the basis of the optical properties. Opaque phases are nontransparent, which means that a different type of microscope must be used. A conventional microscope uses transmitted light while the microscope for opaque phases or the ore microscope uses reflected light.

The project team has chosen to carry out the project itself. This is to be able to work more flexibly in the product development process and not be guided by some guidelines.Every day, we read in the media about a new truck burglary. The problem has become so common that we do not even notice it in the media. Each year the theft of 1 billion of Sweden and the entire 82 billion in Europe in 2008. This is an increase of 10 billion by 2007.