Den allt hårdare konkurrensen på marknaden gör att det blir alltviktigare för mindre tjänsteföretag att utvärdera sitt val avproduktkalkyl.Syftet med denna uppsats är att undersöka El- Företaget AB:sproduktkalkylering samt ge förslag till eventuella förbättringar genomatt jämföra med befintliga och lämpliga produktkalkyler.Resultatet i denna undersökning visar att påläggskalkylen är den mestlämpade kalkylmetoden för El- Företaget AB. Företaget använder sig avdenna modell idag men i slutsatsen har vi konstaterat att det krävsförbättringar. Dessa förändringar bör genomföras för att företaget iframtiden ska kunna jämföra och kontrollera sina kostnader på ettbättre sätt.Because of the competition on the current service market it is moreimportant to minor service companies to evaluate there choice ofproduct calculation.The purpose is to examine El- Företaget Ab:s product calculation andsuggest possible improvements by comparing with existing andappropriate product calculating- methods.The result in this survey shows that absorption costing method is themost suitable one to use by El- Företaget AB. The company uses thismodel today but through the conclusion we have worked outimprovements. These changes will be made to compare and controltheir cost in a better way in the future..

Detta arbete har sin utgångspunkt i ökad återvinning och minskning av sopberg. Ett exempel som vi har använt oss av i vår forskning är ett samarbete mellan Röda Korset och Kriminalvården. Varje år slängs 25 % av de textilier som välgörenhetsorganisationer får in och dessa sopberg skulle man kunna minska genom ökad återvinning. Kriminalvården har registrerat ett varumärke som heter Made in Jail, vilka tillverkar köksrelaterade produkter. Syftet med det här arbetet blev därför att utveckla idéer till hantverksprodukter som slukar mycket spill.Valet av metod blev kvalitativa intervjuer, som utfördes med tre personer med olika kopplingar till arbetet.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Barnoveraller är ett specifikt område inom klädesbranschen. Det ligger lång produktutveckling bakom, som har pågår under ett flertal år, vilket har förbättrat slutprodukten vad det gäller material, beläggningar och sömnadstyper.I B-uppsatsen finner du lättare materialinformation, konstruktionsinformation, nationella samt internationella standarder, krav ställda ifrån tre olika företag och utav ?barnoverallskunden?. Det här samarbetet blir vårt försök att bidra till barnoverallsmarknaden.Vi har utgått ifrån vår referens, ett privatägt barnklädesföretag från Bollebygd, Sverige.1 De har gett oss möjlighet att få vara med i produktutvecklingsprocessen och leta förbättringar som kan gynna slutprodukten och 2bseen som företag. Det har också gett oss möjlighet att skänka något litet (en sammanställning) som kan användas av fler företag i liknande bransch och situation.2bseen önskade sig ett samarbete där vår roll skulle innebära en fortsatt produktutveckling på befintliga produkter som i produktion fått ett och annat fel.Childrens clothing is a particular area of clothing business.

The last decades the increased computerisation at the places of work has led to new physical loads in the working life and new demands on the working environment. The widespread usage of computers in the working life has led to more sedentary work and less daily movement.The purpose of the thesis is to develop a new product to a concept that in a low intensive and healthy promotional way will activate the body. The product will make a combination of healthy promotion activity and work during office hours possible and primary aims to those with a sedentary office work, which leads to that the body don´t get to be activated in the extent needed.Information has been gathered from studies already made in this area, interviews plus a study and an experiment. From the gathered information concepts and functional solutions has been generated and evaluated to result in a product concept.The thesis has resulted in a concept that consists of a work place unit where the user walks on a treadmill and works at the same time.A general conclusion which can be drawn is that the majority of persons that tested to walk and simultaneously work with a computor on the treadmill found this way of working attractive. Many were positively surprised and said that they would use such an physically activating work place implement if it was available at their place of work..

Involving prospective users in a development process is important. This makes it easier to make a more usable product. This thesis is about developing an intranet targeting a school and focus is aimed towards intranet usability.The reader is given knowledge into how to design and implement an intranet using persona. Design and develop by using persona is difficult when there is a group with large variety of knowledge, age and technology interest, so as in this case. Persona although always helps during the development phase because of the strong links to the personas that are created, which gives developers a constant reminder of the end users of the system.The thesis describes how information is collected and processed.

GCM is a product information management system which handles data for consumer packaged goods. GCM was developed during the middle of the nineties and was acquired by Prevas AB in 2004. The GCM application relies on the services provided by the organization GS1, which supplies global specifications and validations for trade items across several sectors. GCM is updated regularly due to the frequent changes in specifications from GS1. However, the overall graphical user interface design has not been redesigned during these years.This dissertation studies possible improvements for the webpage that handles product data in GCM.

Nordic Marine Sauna AB has, since 2005, designed, manufactured and sold floating saunas. Theproduct are characterised by a well thought thru and appealing design and its high quality. Thecompany is now intending to open a new business area by starting a subsidiary, NordicSubmarine Sauna AB, which will design submerged saunas. The expected customers are leisureand conference centres as well as customers that seek an experience out of the ordinary.Due to the products technical complexity a master thesis was adverted. The task was to do aninvestigation whether such a product is technically viable.The job involved research of existing products and constructions material as well as designingthe product with CAD and FEM-programs.

It is important for firms to continually develop their offerings as the business landscape develops in order to sustain their competitiveness (e.g. Schumpeter, 1934; Ansoff, 1979; Porter, 1985; Trott, 2012). In a context of globalization, rapid technology development and changing customer needs, the paper packaging industry is urged to enhance its product development activities (Hansen & Niskanen, 2007; Björkdahl & Börjesson, 2011). However, there is little research about paper packaging firms? product development processes (ibid).

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Background: There is no guarantee that products should be equitable produced. Many products in today's trade is produced by minors, resulting in poor working environment, and gives the workers low payment. Fairtrade is the only label on the market that ensures that farmers receive fair payment for their products. Aim: The central aim with our work is to see what the future consumers, in other words students from Lund's university, Malmö College and The Swedish University of Agricultural Sciences in Alnarp, think about products labeled with Fairtrade, and what they consider is value creation for food products. Students are often relatively young; they educate themselves and have new thoughts and valuations about how the world should be.

The rise of social media has put a focus on the division of owned, paid and earned media, where earned media has recently been hyped at the expense of owned and paid media. Due to a novel area we examine the differences and effects of using owned and paid media, specifically for packaging versus newspapers. Owned and paid media showed no significant differences regarding credibility, persuasion and perceived commerciality, which restored owned media?s status, especially since owned media is more cost efficient. The effects of allowing ads for external brands on the owned medium were also studied.