This bachelor degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.

Denna uppsats behandlar första fasen i produktutvecklingsprocessen, det vill säga Fuzzy Front End (FFE). FFE är perioden från att det finns en möjlig idé och företaget anser att den är värd att utforska ytterligare, till dess att idén är godkänd och företaget är redo för att börja utveckla samt investera i projektet. I litteraturen anses denna fas som kritisk därför att den är problematisk samt avgörande för företagets fortsatta aktiviteter inom FFE. Forskningen har visat att det finns ett samband, att om företaget effektiviserar FFE bidrar det till framgång för den nya produkten. Det finns liten förståelse vad som verkligen försiggår i FFE fasen och i denna Litteratur Review har 12 stycken teman identifieras för att redogöra för FFE.

This report aims to identify and categorize suitable audit users and furthermore establish with values these users experience. The aim of the report has been fulfilled by analyzing interviews carried out with several companies using audits as a part of their risk management process. In addition to this, theories concerning management have been studied..

High technology companies in Sweden spend a huge amount of money on research and product development in proportion to what they get back in earnings from their inventions. Product development has traditionally been regarded as much more important than business development. This thesis aims to point out the critical factors behind successful business development processes for high technology companies. We have chosen to make a case study of Hexagon, a highly successful and innovative company within the measurement technology business. Internal and external actors that are important for business development have been identified and interviewed in order to understand how ideas are developed and executed.

This thesis aims to describe how enterprises can approach and reach older citizens inorder to sell new technology products. For that they need information about aspectsaffecting elderlies purchase decisions regarding these kind of products. The study isbased on 13 qualitative interviews where we have applied semi structured interviews andobservations of the elderlies behaviour towards an Ipad which we used as a study objectduring the interviews.The results of this study shows several aspects which affect the elderlies purchasedecision regarding new technology but it all comes down to one matter, lack ofknowledge. In order to overcome that obstacle, enterprises need to modify theircommunication strategy. They will be needing information about elderlies preferencesand their self-image, meaning how they perceive themselves which is connected to howreceptive they are towards new technology.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

The agriculture of today is getting larger and larger and it demands more efficient machines to handle these larger units. But all farmers don?t have the opportunities or don?t want to expand. What should they do if they want to remain on the farm? An alternative is to start a farm shop.

The aim of this study is to analyze how problems are represented within SOU 2008:27. Further more, the aim is to analyze how the new subject plan for history can bee seen as a product of this document. The method used, and the theoretical frame of the study, is based on Carol Lee Bacchi?s ?what´s the problem represented to be?? approach, which basic principle is that policies are filled with representations of problems and that these representations need to be examined. These problem representations are then themselves subject for scrutiny, the second step being an analysis of the texts presumptions and assumptions concerning view of man and perception of knowledge. The results show, among other things, that a problem representations can be found in the SOU; the school system is too vague and unclear.

Marketing has been developed and revalued the last years. The consumer today is moreeducated and is therefore able to have higher demands. These requirements together with theincreased competition is forcing brands to find creative ways to reach their target market.Fashion has throughout history contributed to, and been influenced by, changes in society.Through all times, people have used fashion and clothing as a way to demonstrate their socialidentity and to be accepted. Companies in the fashion industry can be successful if theydevelop brands that attract consumers. To achieve this, companies must find newcommunication tools to reach out to the consumer, among these tools, we find the fashioneditorials.Our aim is to investigate whether product placement occurs in Swedish fashion editorials.Through our thesis we want to explore how consumers perceive the editorials and alsowhether if they are used as a marketing channel.The method is qualitative and the study is based on semi structured interviews and a focusgroup interview.

The environmental assessment system Miljöbyggnad is a Swedish system initiated by Bygga-Bo-Dialogen to assess buildings with regards to three main areas; ?Energy?, ?Indoor climate? and ?Materials?. A building can obtain three different classifications depending on how well it manages to meet the demands. GOLD is the highest classification and is followed by SILVER and BRONZE. The majority of the measures needed to comply with the demands are done during the design phase.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.