In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

Outside of many Swedish households today, you will find a typical green wastecontainer. This container has not changed since its introduction, despitecomplaints about foul-smelling and its impractical system. Even if the system usedtoday, still is the most optimal choice, there is a lot of newly developedalternatives out there.Its purpose is to get a broader perspective on how a waste management systemcan be developed into a working, land efficiently and aesthetically pleasing systemof humans and the environment in a small residential area.The authors treat the residential area of Jära, Ekhagen, in Jönköping, which ismanaged by JM AB as a problem area in regards to waste management.The issues raised by the authors are the different waste management systems usedin the corresponding areas of the world, how to apply technical andenvironmental as well as the waste management facilities from financial aspects.In the process, the methods used were literature reviews, case studies and aninterview. The case study was done through a modeling of waste managementsystems in the area Jära and an interview was conducted with the company Envacworking with vacuum systems. Studies have been made by different systems n theareas around the world.The results show that using directives and guidance will reduce the environmentalimpact done without replacing the traditional system.

The high level of competition and the rapidly growing technology development has created new challenges for today's businesses where they are forced to deliver more customized products at a lower price and a shorter time period. This places high demands on the companies' ability to design and develop better products in a more efficient way. In addition to developing products, the design process focuses on securing long-term success for the company by developing nourishing skills. However, to achieve an effective design process the companies must improve their ability to plan as well as use their knowledge base in a more efficient manner. Toyota's product development system is a critical component for companies to address challenges that they?re facing and offers a great potential to create significant competitive advantages.

Syftet med föreliggande studie var att undersöka om det fanns någon skillnad mellan de som varit anställd få respektive många år samt mellan de som arbetade dagtid och de som arbetade skift gällande uppfattningen av säkerhetsklimatet avseende både ledningen säkerhetsarbete och arbetsgruppens säkerhetsarbete på ett bruk inom massa- och pappersindustrin. Totalt deltog 92 medarbetarna i studien och dessa fick besvara frågeformuläret, Nordic Safety Climate Questionnaire (NOSACQ-50). Resultatet visade att de som arbetat många år uppfattade både ledningens och arbetsgruppens säkerhetsarbete som bättre än de som arbetat få år. Det visade sig även att de som arbetade dagtid uppfattade, om än bara i närheten till signifikant, ledningens säkerhetsarbete bättre än de som arbetade skift. Att ha en förståelse kring att det finns skillnader i uppfattningen av säkerhetsklimatet och vad dessa kan bero på kan vara av vikt för att skapa ett bättre säkerhetsarbete på företaget, något som diskuteras i uppsatsen..

The globalization of today?s society has enabled consumers to acquire products and services from all over the world. Global organizations have the entire world as a playfield and offer products and services across markets. Regardless perception and transparency of the global market, consumers are still individuals. Consumers may have different perceptions and ideas about products, their functions and usage.

Handling product returns has become a critical activity for organizations as the volume of gods flowing back through the supply chain rapidly increases. Few research studies have published specific empirical data concerning the reverse logistics practices of companies. Information technology and information support has long been recognized as a competitive weapon ? capable of enhancing company performance and achieving efficient reverse logistics. Reverse logistics is very unlike the forward, as it is more reactive and also has less visibility.

Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

A great deal of the nature experience we get today is from travelling along our roads, which to a large extent go through the forest landscape. This makes the forest along our roads interesting to look at from a nature experience perspective. The main idea of this work is to increase the awareness of how we are affected by the forest when we travel through it and find out how the forest should be adapted to the road environment to create a pleasant nature experience as well as increase traffic safety. 0.9 % of Sweden's total forest area (equivalent to 200 000 hectares) is in close proximity to roads. Additionally, in Sweden 440 million hours are spent behind the wheel of which a great deal probably is spent on roads surrounded by forest in some form.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

The aim of this study is to examine the legal regulation regarding the psychosocial work environment for temporary agency workers. Furthermore, the aim of the study is to examine how temporary agency workers perceive their psychosocial work environment, and possible consequences of such perception. The methodology of the study consists of practical legal method and qualitative method in the form of interviews.The results show that the psychosocial work environment for temporary agency workers is regulated at both the EU legal level by Directive as well as at national level in Arbetsmiljölagen and regulations issued by Arbetsmiljöverket. The study finds that health and safety responsibility for temporary agency workers is shared between the agency and the client company. The result of the study indicates that there are shortcomings in the introduction and training of temporary agency workers, which can contribute to an unsatisfactory work environment.

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

Thesis purpose: The purpose of this thesis is to make a contribution, by connecting the transfer of meaning within the context of TV series. The meaning is transferred from the brand to the character in a TV series and then further to the viewer. To look at different role functions that are used in dramaturgy and narrative techniques, we will be able to see how the brand will have a specific role and thereby make the transfer of meaning more successful and effective. This role will have an important impact on product placement according to the meaning that will be transferred from the brand to the viewer, through the character. Methodology: By looking at the transfer of meaning process that is created from the brand, an unstructured observation is applied where we observed the placement and usage of different within a specific TV series.

This study is about how a swedish brand within the food industry that experiences a crisis following a product failure. It focuses on three areas following the crisis and these are crisis management, recovery strategies and brand management. This study seeks to explain how these areas interact in relation to massive exposure to mass media and how they interact restore the brand's potential loss of reputation. This study was conducted as a case study with a deductive and qualitative approach. The data gathered to this study was mainly based on newspaper articles and complemented with semi-structured interviews with twelve local retailers of the brand..

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.