Purpose ? The purpose of this study is to identify and describe how consumer perceptions regarding information quality, sender credibility and effect of eWOM-communication differ between Facebook and Prisjakt.Approach ? Based on previous research an analytical model was designed. The parts in the model were the aspects of the problem which the present study aimed to examine. An experimental design was applied in which ten students at Örebro University were exposed to a scenario where they took part of eWOM-communication concerning a specific product on Facebook and Prisjakt and then had to answer questions in an interview. The analytical model formed the base of the interview guide used in the interview and the specific product was chosen with help from a focus group.Implication ? The study illustrates that consumers may perceive the quality higher on Prisjakt while the sender credibility can be perceived higher on Facebook.

The number of products offered by retailers has increased immensely during the last two decades, which has resulted in an increase of naming decisions having to be made. The importance of product names has become more significant for retailers offering their products online, as these are more visible to the customer in comparison to products offered offline. Consequently, it is of great value for retailers to gain knowledge about how a product name affects the customers' perception of the product. The purpose of this study is to examine whether product names affect customers perception of the relevant products in the online environment. This has been illustrated by applying the following theories to the relevant product names; meaningful and meaningless brand names as well as concrete and abstract words.

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

Cause-Related Marketing (CRM) is not a completely new phenomenon, yet an idea whose time has truly come. To have commercial organizations cooperate with charity organizations for mutual profit is a "win-win-win" situation. The company gets added value to its brand, the charity organization gets to collect more money that it otherwise wouldn't and the customer gains a feeling that he or she has contributed to the society.The purpose of this thesis is to study how a company, in practice, works with CRM marketing. How do they choose which charity organization to work with,what type of product is most appropriate to market with CRM and how is the CRM campaign designed? A theoretical model is then formed to answer these questions, after a thorough research of relevant theory on the subject.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

Research has concluded that meaningless differentiation with trivial attributes sometimes can be a successful strategy. However, the effect varies with respect to certain aspects such as the price of the product and the decision context. How the characteristics of the consumer influence the effect of trivial attributes has until now been unknown. This thesis investigates how the consumer?s level of knowledge and personal involvement influence the effects of trivial attributes on product preferences and product attitudes.

The thesis deals with three document retrieval models based on logic: the Boolean model,the fuzzy model and the Van Rijsbergen model.In Chapter 1, the author presents the purpose of the thesis. This is to give the logical foundationof the models, to describe them and to examine them critically. In Chapter 2, some importantnotions in document retrieval are presented. Chapter 3 is devoted to the Boolean model, Chapter4 to the fuzzy model and Chapter 5 to the Van Rijsbergen model.These three chapters are organized in the same way. First, the logical foundation of the modelis given.

This thesis will describe the redesign of the manure fork SverigeGrepen. The productis available for purchase in Scandinavia and and parts of the rest of Europe.The product is available in stores but the companys goal is to start distribute it overthe internet. A problem today with a purchase over the internet is that the costumerhas to pay a high shipping-fee due to the products unique form. The long handlecontributes to the high shipping-fee which makes it hard to attract costumers topurchase the product online. Deficiencies have been found at the manure forks basketand needs to be examined.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

The main purpose of this master thesis is to identify the issues concerning the transformation process of a product oriented company into a service oriented company, and how these issues can be overcome. We will exemplify this by developing a dewatering pump rental concept for ABS, and identify the drivers and barriers for ABS when implementing the service oriented rental concept in Sweden and Poland. This master thesis is based on the systems perspective. The reason for this is the required holistic perspective, where the system has to be regarded from different points of departure in order to be understood. The theoretical studies include services and change management.

DV01 is a bicycle concept aimed towards a contemporary target group, that considers the bicycle to be both a convenient means of transportation and a product with a high aesthetical value. A bicycle is for many people something that you attach to your own personal style, were not only the bicycles function but also its appearance plays a crucial role. It is also a product that consists of many different components and parts, which all affect the overall impression. The focus of the project has therefore been about finding a balance in the design. When form and function interact in a successful symbiosis, the result is often that the product may last longer and are more loved by its users..

This thesis has been done at the Unversity of Örebro for Örebro University Hospital (USÖ). In our work we have developed a product for hearing tests to determine hearing thresholds of small children. Our product contains software and a control surface for controlling two separate screens. One of the demands was that our software could handle big file libraries. Reliability and simplicity were essential for the user.In our work we have utilized programming of both microcontrollers and Windows software.

AbstractThis study aims to investigate the applicability of well-recognized supply chain strategies based on product characteristics. Choosing the right supply chain strategy can be the difference between winner and loser in today?s competitive climate and science offers several recommendations as to which aspects that should be considered. Fisher (1997) and Christopher and Towill (2002) suggest that supply chain strategies should be based on what kind of product the company is handling and that, in order to know which strategy is the most appropriate, the products must be categorized. Some criteria developed for the categorization are lead time, forecast in demand and profit margin.

Syfte: Syfte med uppsatsen är att öka vår kunskap om product displacement samt att utreda den påverkan product displacement har på mottagaren sett ur ett marknadsföringsperspektiv. Pararellt undersöks om fenomenet kan vara en fördel eller nackdel i marknadskommunikationen. Utgångspunkten i utredningen är att varumärkesinnehavare själva använder sig av product displacement.Metod: Denna studie har genomförts med en kvalitativ metod och induktiv ansats. Metodvalet har sin utgångspunkt i den bristande teorin då fenomenet product displacement är ett nytt begrepp sett ur ett marknadsföringsperspektiv. Undersökningen bygger på tjugo kvalitativa intervjuer med mottagare av product displacement samt två respondenter med yrkesanknytning inom marknadsföring.Avgränsningar: Denna uppsats behandlar endast product displacements effekter på mottagaren som i vårt fall är begränsat till studenter i ålder 20-25 år.