In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

The purpose of this Bachelor thesis in Economics at Lund University is to try to establish the correlation between the value change of retail real estate buildings in Sweden and macro economic variables. The principal method is the multiple regression model and it is used to estimate the basic model. The basic model is enhanced by estimating some 30 models and the result is two good models. The difference between the basic model and the two better models are small but important. In the lagged basic model, the same variables are used as in the basic model but with different time lags.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

We have a business proposal. Instead of the consumers visit the country side in order to purshase we are interested in starting a shop with only regional produced products in the city. We have our base in a part of Sweden called Östergötland, therefore we have investigated the market for such a store in Östergötlands biggest city, called Linköping. The conclusion is that the store must sell food produced in the region. Another conlusion is that the store must be located near a bigger supermarket. Our main selling points are quality and that the food is produced in the near region.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

This study reflects on the swedish model and the models future. The swedish modelmeans that legisilation acts with the collective agreements . The wage issue is notregulated by law instead it is managed by the social partners in the form of collectiveagreements. In 2008, a report was presented by the Commission on a joint regulation ofthe minimum wage for all EU countries. The issue has become increasinglycontroversial and was especially disccused for the election of candidates to theEuropean Parlament last spring.

Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

SNA Europe?s handsaw concept is called ?Bahco Handsaw System? and is constituted by a saw handle with the possibility to switch between different saw blades. The sales of ?Bahco Handsaw System? products have not achieved the desired results probably due to the high price. Developing a more cost efficient handle, enabling a lower consumer price of the product, is assumed to increase the sales volume.

Accounting has been critized for being one of the leading factors in the latest financial crisis. One of the primary problem areas was identified as delayed recogonition of losses on financial instruments. Consequently, a new impairment model is being developed and is to be namned expected loss model. The difference from the present model, incurred loss model, is that it takes losses into consideration on an much earlier level. Even though the model may be theoretically feasible, in practice it may implicate a number of issues.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

Tourism has been an expanding market since the first travel agency started in the middle of the 18?Th century, and today it is a global industry, with intensified competition and high demands from the customers. Product development is therefore one of the most important aspects for successful companies, and scientists also agree that the first stages in product development are the most critical. This essay is focusing on those stages, regarding product development on travel agencies, and the research question is as follows: How are new tourism destinations developed and what is the difference in working process between small and big travel agencies? The empirical research consists of qualitative semi-structured interviews with two big and two small travel agencies.

The PhonePages of Sweden is a company that develops software for mobile units, especially cell phones. This thesis treats the development of, and contingencies for, a mobile phone directory, using the limited resources found in a mobile unit. The project was implemented and executed at The PhonePages with the intention of creating a product to sell to a third party.By studying different solutions, their benefits and drawbacks, an abstract picture of the product was constructed. Problems covered include compatibility problems caused by todays platform diversity as well as problems with saving, organizing and presenting data.The main goal was to create a phone directory which does not make external information retrievals. The service should contain both company and personal information, with name and phonenumber.

This examination paper concerns how a organization can reach right quality. In this case the focus is on the communication of the soft product quality within an organization to achieve right quality. To fulfill the aim of this study a case company has been used to be able to show the absence in the topic. The questions of the study are: How have the customer?s needs been communicated within the organization? What absences are there today concerning the communication of the customer?s needs within the organization? How can the communication of the customer?s needs within the organization improve?The aim of this study is to describe and analyse how the transmitting of the customer?s needs concerning soft product quality is made today in the case company and to reach any improving suggestions.

New innovation and technology have influenced the development of product development processes and the four largest banks in Sweden have more or less been forced to adapt their products and services along new customer requirements. It may therefore be considered appropriate to involve customers in this process. This by collecting customer information and allow customers to influence the process to a greater extent. The payment solutions of Sweden?s largest banks' continue to evolve and to pay with electronic money has come to change banks' product development processes of payment solutions.