This report is a documentation of the workflow and the result of a project carried out by twostudents from the Royal Institute of Technology in collaboration with a company. The report isstructured in a chronological order and describes the methods and systems developed in theworkflow. The report shows how the project evolved from a study phase to the various proposals onthe concept solutions.The project aims to develop a systematic way of bonding two different kind of cardboard under fiveminutes. By conducting a general study about glue and its different forms it was possible to obtain abroad knowledge, which helped to choose the right substances to later use in testing on the differentcardboard materials in question. Glues's survey resulted in a list of different substances that wererelevant to the project.

The concept of planetary boundaries was introduced in the year 2009 by a group ofresearchers led by Johan Rockström and Will Steffen. The group presented a draft of thelimits of the planet regarding nine Earth System processes concerning climate change, oceanacidification, stratospheric ozone depletion, atmospheric aerosol loading, interference with Pand N cycles, global freshwater use, land-system change, rate of biodiversity loss andchemical pollution. The starting point for the study presented in this report was that asustainable development only can be achieved if humankind stays within the boundaries. It istherefore, based on the ongoing urbanization, relevant to evaluate how cities affect the EarthSystem processes. The aim of the study was to investigate if Stockholm Royal Seaport (NorraDjurgårdsstaden), a district in the northeast of Stockholm with a clear environmental profile,affects the Earth System processes less than Stockholm in general does.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

Abstract Title: Enabling Smart Research and Development through Knowledge Conversation Seminar date: 2005-06-08 Course: Master thesis in business administration, 10 Swedish credits (15 ECTS) Authors: Andreas Johnsson, Johan Rosendahl Advisors: Lars Bengtsson Key words: Knowledge management, Knowledge conversation, Research and development, Ba, Trelleborg Purpose: The purpose of the thesis is to create a model that shows how knowledge management aimed at research and development processes can be used and how the theoretical fields can be connected. Methodology: The thesis is based on abductive perspective where empirical and theoretical material has been mixed to create a foundation for the analysis. Theoretical perspectives: Theories concerning knowledge management and research and development have primarily been used. These have been complemented with material about team structures and incentive systems. Empirical foundation: The empirical material is based on semi structured, mostly qualitative interviews and strictly quantitative inquiries performed at Industrial Hose within the Trelleborg group.

From the customer?s perspective the only reason for a firm to exist is the value it creates. However, a problem within manufacturing companies is that of the total lead time, only a small part can be considered as value adding. It has further been discovered that when working with improvements businesses often sub-optimizes single processes instead of considering what benefits the entire company. Thus, when improving processes and activities it is important to have knowledge about and understand which factors that affect how the flow can be designed.Several studies have been performed with a wide perspective on process flows in order to obtain a more resource-efficient and value added flow.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

In a phonological assessment, the aim is to obtain systematic and reliable data of a child's speech output, which can then serve as a basis for a decision on an appropriate intervention (Wolk & Meisler, 1998). Whether phonological assessment should be derived from an analysis of picture-naming or a conversation with the child, and whether the two methods for elicitation generate equivalent results, has been debated among clinicians and researchers for an extended time (Masterson, Bernhardt & Hofheintz, 2005).The aim of the present study was to compare two methods of speech elicitation for phonological assessment: spontaneous conversation and picture-naming, respectively. In the study, the procedures have been used when assessing children with phonological disorders as well as children with typical language development. The results are presented using two levels of phonological analysis; degree of phonological impairment, in terms of percentage of phonemes correct (PPC), and type of phonological impairment, in terms of phonological simplification processes. Eighteen (18) children participated in the study, nine (9) with phonological impairment (age 3;10 ? 5;11), and nine with typical phonologic development (age 3;2 ? 4;6).

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

In this thesis my purpose is to study the mechanisms and discourses that are the foundations for identification processes, in a contemporary society characterised by increased mobility. By means of a fictitious life history, I relate to this problem constantly through the work. At the beginning of the essay I discuss the traditional, western, philosophical view of the self and its surroundings, which eventually leads me to focus on the theories of the sociology of knowledge. From this perspective I choose to examine globalisation processes and mobility, to create an understanding of how these two, changes the circumstances for the individual identification. In my concluding argument I stress that all research or all studies concerning identification processes must take into account that these identifications always take place with regard to time/place which also means, that it takes place both in real space and in imaginary space.

The product "urinal funnel" for women has fascinated me for a long time. Not only because it solves a practical problem in a simple way, but also because it challenges our definitions of gender and behaviour. This report describes the process of making a new design for a funnel, taking material, ergonomics and construction in consideration. It also includes structuring a launching of the product in Sweden. It starts up with a large amount of information gathering, both by interviewing testgroup-perticipants, but also by researching and evaluating the range of existing funnels.

In which ways have composing processes in music appeared over the past 300 years? How may composing processes work today? What does new technology do to this processes?The key purpose of this study is to investigate various composing processes. A further purpose is also to gain an awareness of how we use modern technology by computers and their notation programmes.The research design of this thesis includes a display of literature related to composing processes. along with an analysis of the writer?s own experiences in the area.

The project, Glowtest Fixture, has been carried out to and in collaboration with MSA SordinLtd. MSA Sordin Ltd produces and sells ear protector and is at present a supplier on theworld market. Glowtest Fixture is a product for glow testing off detailed components in oneear protector. MSA Sordin Ltd sends today away your products for testing what is anexpensive aspect in their development. The project's aim is to take forward a test equipmentthat copes with those high nonplussed requirements and wishes that are required for anapproved physical execution.Glowtest Fixture is a physical equipment that comes used stem glow physical off all detailedcomponents in one ear protector.

I will write about product placement in film from a Swedish point of view. This entails writing about Swedish films with different types of product placements, not only how they are done but also discuss how they succeed from a sales perspective. In my earlier work I have written about the product placement of watches. In this thesis I focus on the film series about the Swedish agent Carl Hamilton, since here you can see how Swedish film has developed during the past 30 years with regard to product placements. Both world politics and the concrete placements are illustrated in a clear way.