There are numerous questions to be asked when your task is to plan a small community?s future development. Is it possible to suggest something new and modern? What considerations should be taken concerning the existing situation? What is an appropriate size for the new development? Where is it possible to build and what is the most appropriate method to use?In this master´s thesis I have tried to develop and describe a working-process where I execute a complete landscape character analysis for the whole community in question to get the answers to where and how it would be most appropriate to develop a village like Flädie without destroying its current character.Flädie is a typical small village in the countryside of Skåne, Sweden. It is strongly effected by the expansive and urban region it?s located in but is still rural in character.

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

This is a study of proficiency development of major/lt colonel officers (level 2-3) within the Swedish armed forces. The study includes officers above the age of 45. The background of this study is a study from January 2000 (written by Björn Osswald). Osswald discovered that proficiency development decreased at the age of 45. Since the profession as an officer today is a lifetime profession, this is a result that the Swedish Armed Forces not can afford.

På dagens hårt konkurrensutsatt marknad är inte bara priset en viktig konkurrenskraft, även relationen mellan kund och leverantör kan spela en avgörande roll för om det blir en affär eller inte. Möjligheten att låta kunden vara delaktig i produktutvecklingsprocessen är även ett sätt att stärka kundrelationerna. Uppsatsens syfte har därför varit att undersöka kundrelationerna både från leverantörens och kundens perspektiv. Avsikten med uppsatsen var även att undersöka hur kundrelationer och kundinvolverad produktutveckling kan användas för att skapa konkurrensfördelar inom Business-to-Business. Almedahls var även intresserade av att närmare undersöka möjligheterna för digitaltryck, vilket är en ny tryckprocess för företaget.Vi gjorde därför en fallstudie på Almedahls, ett tillverkande företag inom textilbranschen.

Den allt hårdare konkurrensen på marknaden gör att det blir alltviktigare för mindre tjänsteföretag att utvärdera sitt val avproduktkalkyl.Syftet med denna uppsats är att undersöka El- Företaget AB:sproduktkalkylering samt ge förslag till eventuella förbättringar genomatt jämföra med befintliga och lämpliga produktkalkyler.Resultatet i denna undersökning visar att påläggskalkylen är den mestlämpade kalkylmetoden för El- Företaget AB. Företaget använder sig avdenna modell idag men i slutsatsen har vi konstaterat att det krävsförbättringar. Dessa förändringar bör genomföras för att företaget iframtiden ska kunna jämföra och kontrollera sina kostnader på ettbättre sätt.Because of the competition on the current service market it is moreimportant to minor service companies to evaluate there choice ofproduct calculation.The purpose is to examine El- Företaget Ab:s product calculation andsuggest possible improvements by comparing with existing andappropriate product calculating- methods.The result in this survey shows that absorption costing method is themost suitable one to use by El- Företaget AB. The company uses thismodel today but through the conclusion we have worked outimprovements. These changes will be made to compare and controltheir cost in a better way in the future..

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

The design of packages is something that product manufacturers put great effort on. The package is often the consumers' first interaction with a product and consumers judge the product based on the package. A common way to evaluate a package design is to let respondents look at a package and answer which attributes they think the product has. This paper wants to take this evaluation a step further, i.e. it examines if consumers experience differences in taste between two identical products that have different package designs.

The purpose of the study is to explain whether the introduction of a new and different brand by means of a brand extension affects consumers? perceptions of the product category that the brand is launched in. An experiment was carried out to study the following aspects: associations and constellations of associations to the product category, interest, perceived variation, and the perceived similarity with the category from which the brands were extended. In the study, brand breadth in the original product category was used as moderating variable. Aspects found to be affected by the brand extensions were associations to the product category, the constellations of these associations and the perceived similarity with the category from which the brands were extended.

The thesis strives to answer the question whether there are any differences between how young customers, in comparison with older, are affected by brands when buying different products. The purpose is to get a clearer idea about the brands' importance in the future and in that way also to give guidance to companies about how to best market themselves and there products.To answer the question, an experiment was conducted with 480 respondents taking a survey where they had to rate a product after reading a short text about it. Some of the texts stated that a specific brand was behind the product while some said the product was produced by an unknown brand.The result of the study was that young people showed a greater propensity of rating products with a brand higher than products without brands, in comparison with the older respondents. This gives reason to believe that brands progressively will become an even more important tool for marketers and an unmatched asset for companies in the future..

In a society where adults set the conditions for children?s play and generate modern and at times technically advanced products, fundamental characteristics like simplicity, opportunities for motor skills training and learning tend to be neglected. Owing to this, the Linköping-based company Time In wants to introduce a new multifunctional product, which differs from other products in shape and function and lives up to the often overlooked, basic characteristics in a toy.With Time In as the assigner, the purpose of this master thesis has been to use simple means to produce a "learning by playing" concept. Since Time In sells toys and products suitable for children in nurseries and preschools, the development of the products has therefore included a study of nursery and preschool environments.The thesis has been carried out within the Product Design subject area at the Department of Management and Engineering at Linköping University. Concept development has been done in three phases: the Preparation phase, the Design phase and the Presentation phase.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

The aim of this essay is to find some of the main developing tendencies in the advertisement genre during the period of 1930-2000. The analysis is based on three examples of Gevalia cinema and TV-advertisement. Research findings are the result of using theories from different but relevant sciences, which are media, linguistics and rhetoric. Media studies help to explain the influence of the society and technology development on the advertising business. Linguistics and rhetoric give the main methods and terminology for the basic as well as comparing analyses of the three advertisements in question.

Abstrakt Under vårt kandidatarbete arbetade vi under 20 veckor med att utveckla ett webbaserat spel riktat mot Facebook. Vi använde Agile/Scrum som projektmetod för vårt arbete och förändrade metoden och utvecklade verkyg för att effektivisera den för vårt syfte. Vi kom fram till att det är svårt att göra ett socialt spel och att det viktigaste i produktionen är att se till att det finns en tydlig koppling mellan spelarnas interaktion med varandra och den grundläggande spelmekaniken. Vi tappade fokus under utvecklingen och lärde oss den hårda vägen vikten av att planera realistiskt och börja ifrån grunden när man utvecklar ett spel. Spelet vi skapade använder sig av slumpässigt genererad terräng, är skrivet i JavaScript och utspelar sig i en viktoriansk miljö.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.