This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

Det finns mycket tidigare forskning och litteratur om hur design som kommunikationsmedel kan tilla?mpas i praktiken, ba?de genom estetisk och strategisk design. Da?remot framga?r inte huruvida tilla?mpningen av design som kommunikationsmedel a?r branschspecifik eller generellt ga?llande fo?r fo?retag oavsett bransch. Fo?retag kan nyttja design som ett kommunikationsmedel fo?r att kommunicera sin varuma?rkesidentitet till konsumenterna sa? att deras syn pa? imagen blir liksta?lld med identiteten.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

The first ad was published in Sweden 1645. Advertising itself is not a new phenomenon, it's just the conditions that has been changed. Today, advertising is a matter of course in our daily lives, every day we are exposed to thousands of messages that wants to persuade and convince us to consume. In this paper, we have looked into the semiotic and rhetorical tricks that are used for this particular persuasion, and we have investigated whether they have changed in the last 60 years or if the same tricks are still being used today. Our two hypotheses is: A) the rhetorical and semiotic basis of an ad looks the same today as 60 years ago.

This master project in landscape architecture is named Interactivation Design - places for social imagination and conversation in Lindängelund. There are two main purposes of this thesis the first being to bring forth a study of interactivity implemented in the subject of landscape architecture. The second purpose of this thesis is to present a proposal to design a confluent landscape weaving together the upcoming botanical garden of Lindängelund and the residential area of Almvik, both situated in southern Malmö, Sweden, and also weaves people and their experiences together. This project may be described as investigative and experimentative reaserch by design.The first part of this project, Interactivation, is consisting of a theoretical report which discusses different ways of approaching when, how and why we interact in public space. Literature studies in for example space, placemaking, social life, people, participation and Japanese emptiness concepts has been undertaken to gain knowledge in the aim to create interactive landscape design.The second part, Context and Design Proposal, introduces the project context area of Southern Fosie in Malmö which consists of different kinds of residential areas, people of different nationalities and a large building site for a botanical garden and recreational area.

Den här rapporten redovisar produktionsprocessen för en re-design av en webbsida. Kommunikations-byrån Åkesson & Currys webbsida har funnits i över fem år. I dagsläget tycker inte företaget att webbsidan representerar vilka de är, därför var ett led i produktionsprocessen att undersöka hur de ser på sin identitet. Målet var att med en ny vision av Åkesson & Currys identitet producera ett designförslag över en webbsida som presenterar dem på ett representativt sätt. Re-designen ska möjliggöra att användaren blir intresserad av byrån och gärna initierar till en ny kontakt med Åkesson & Curry efter ett besök på webbsidan.

Marknadsaktiviteter vid produktlansering är ett samarbete med Haglöfs Scandinavia AB. Våren 2010 utfördes ett samarbetade med Haglöfs då ett underlag för utökat produktsortiment inom konfektion togs fram. På uppdrag av Haglöfs ska ett förslag framställas på hur en lansering ska kunna se ut om juniorkollektionen introduceras på den svenska marknaden. Hur fungerar det med produktlanseringens strategiska och taktiska lanseringsbeslut och vilka marknadsföringskanaler är lämpliga vid en produktlansering inom outdoorbranschen.Rapporten behandlar hur dagens företag inom outdoorbranschen i Sverige fullgör sina marknadsaktiviteter vid en produktlansering. Strategiska och taktiska lanseringsbeslut illustreras samt utvalda marknadsföringskanaler skildras.En lanseringsstrategi beskriver de marknadsföringsbeslut som är nödvändiga för att presentera en ny produkt till respektive målgrupp och börja generera en inkomst i form av försäljning av den nya produkten.

HMS Networks AB develops, produces and sells communication technology for industrial automation. The product handles communication between a variety of protocols. The product treated in this project is an Anybus X-gateway Modbus-TCP Master/Client and this module is currently configured from a web-based interface. In doing so, the flexibility for handling protocols is limited to what the company chooses to add to the interface. Therefore the company had a request that the flexibility should be extended using a script language.

AbstractConcrete foundation slabs are usually exposed to unilateral drying during the curing process. The unilateral drying causes an axial shrinkage and a concave curvature of the construction. The curvature results from the fact that the upper part of the slab is drying and shrinking faster than the lower part. This is called gradient shrinkage.A problem occurs when the slab is considered fully restrained by adjoining structural parts. The deformations caused by axial contraction due to the constant part of the shrinkage and the curvature caused by gradient shrinkage of the slab are then prevented by the fact that the slab is fully restrained.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 22, 5 hp, 2014.

This paper examines the impact of conscious shelf management on online grocery stores. An S-O-R framework is used to unveil if some established shelf management techniques from physical stores are applicable in an online context. We also explain some of the cognitive processes customers experience as they get exposed to online buying situations. A main study with two data sources is conducted: one quantitative website experiment with 168 participants who got exposed to five different organisation patterns within five different categories; and one more qualitative eye tracking experiment with 20 participants. The results indicate that a disorganised product page evokes not only different scan paths and cognitive patterns but also generates higher sales.

Initiativet till projektet togs av tandvårdspersonal på Specialisttandvården i Halmstad då de upplevde problem vid arbete med oral protetik. Problemet, som projektet även bygger på, innebär att komponenter tappas och på grund av gravitationen samt patientens position riskeras att inhaleras eller sväljas. Detta innebär ett stress- och orosmoment, vilket bidrar till en försämrad psykosocial arbetsmiljö för tandvårdspersonalen. 2008 infördes det statliga tandvårdsstödet i Sverige vilket innebär en reducerad kostnad för protetikingrepp som lett till att fler har råd med oral protetik. Därför blir problemet mer och mer utbrett, vilket gjort kravet på en lösning mer eftertraktad. I projektet har dynamisk produktutveckling tillämpats med stort fokus på involvering av framtida användare. Artikelsökning, observation och enkätundersökning i genomförd produktdefinitionsfas lade grunden till projektet.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .