From a social perspective, I have been working on how to change current consumption patterns through a change in people's behavior and attitude towards their possessions. The concept is based on how we can value, care for, and preserve our belongings by using theories in the empathic design field. I have created a structure that allows people to become an active part of a creative process and create their own products. Through this commitment, an emotional relationship is built between the user and the product, and the product tends to gain a longer life. Based on a method to manufacture your own yarn by reusing old clothes, I want to provide the basic tools for an easy and playful way to build the knowledge needed to produce something useful..

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

By using modern methods of casting concrete, cast in place can get more effective and industrialized. A modern method is self compacting concrete. By using this type of concrete, advantages like improved working environment and rationalized construction can be reached. Because the concrete doesn?t need to be vibrated, the amount of staff on site and the noise can be reduced.

Detta examensarbete är den avslutande delen av utbildningen inom maskinteknik på Linnéuniversitetet i Växjö under våren 2013. Arbetet utfördes i samarbete med Rottne Industri AB där skogsmaskiner utvecklas och tillverkas för skogsbruk. Projektet innefattar utveckling av en hjulupphängningskomponent kallad ?hjularm? tillhörande företagets ledande produkt, skördaren H-8. Resultatet slutade i en ny design av hjularmen med hjälp av CAD-modellering, Systems Engineering och FEM-analysering..

The energy in laundry rooms, in form heated air, can be utilized with a heat exchanger. A concept and an early prototype of the heat exchanger have already been developed to show that the theory works. This report describes the continued development and construction of the product.A field study was made in order to investigate the environmental usage and establish the product design. The most common washing machine was used as a calculation model, and calculations were also made to estimate the amount of energy in the air. A previous analysis of the existing prototype is also presented in this report, to show the products potential capacity.

This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

Safety, its a word not commonly associated with elderly people living alone. There is however a device that is supposed to bring safety, and enable elderly people to continue living in their present household - an emergency dialer. However these devices does not serve their own purpose in terms of design. Thepurpose of this study is to create an emergency dailer that everybody would want to put on their wrist or bedside table. The market for these devices have looked the same for the last twentyfive years, despite of society´s advancements in both design and technology.

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

Technology has grown rapidly in recent years. At present, almost all social interaction are through computers and telephones. It is, however, not everyone who can manage these media. This applies mostly to elderly people who have not kept pace with technological developments. A major contributing reason is that the manuals are usually bulky and too technical for this group.The purpose of this paper is to develop a concept/prototype into a product that will facilitate the use of mobile phones for seniors.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.