Bakgrund: Marknadsföring är ett ständigt föränderligt område, och den tekniska utvecklingen har medfört både problem och lösningar. Digital produktplacering, vilket möjliggör infogning av produkter och varumärken i efterbearbetningen av en film- eller tv-inspelning, kan ses som en lösning på den traditionella produktplaceringens brister.Syfte: Syftet med studien är att presentera en konceptuell jämförelse mellan traditionell och digital produktplacering med fokus på att, inom ramen för det senare, beskriva, analysera och skapa en förståelse för fenomenet. Studien innefattar att en definition av digital produktplacering skapas, samtidigt som dess bransch exemplifieras och framtidstron utreds.Genomförande: Efter genomförd förstudie användes dokumentstudier, och intervjuer med fem aktörer inom produktplaceringsbranschen samt en medieforskare, för att studera fenomenet utifrån vårt valda syfte.Slutsats: Vår definition av digital produktplacering, ur marknadsföringssynpunkt, lyder: Digital infogning av produkter, eller varumärken, i tidigare inspelat medieinnehåll i syfte att påverka den avsedda målgruppen. Fenomenet anser vi komplettera traditionell produktplacering som marknadsföringsmetod och kommer därför troligen inte att ersätta densamma, utan istället verka i symbios. Däremot tycks framtiden se positiv ut för de båda fenomenens användande..

As a consumer often chooses product or service to satisfy the specific needs or desires. However, there is more often than not several brands that manufacture the same product, which means we also have to choose between these brands before we can calm our needs. This choice is usually an active decision. We choose a brand that we are familiar with, or a brand whose identity appeals to us. The brand thus has a major impact on both consumers' decision-making in connection with the purchase, but also for business success.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

In a society where adults set the conditions for children?s play and generate modern and at times technically advanced products, fundamental characteristics like simplicity, opportunities for motor skills training and learning tend to be neglected. Owing to this, the Linköping-based company Time In wants to introduce a new multifunctional product, which differs from other products in shape and function and lives up to the often overlooked, basic characteristics in a toy.With Time In as the assigner, the purpose of this master thesis has been to use simple means to produce a "learning by playing" concept. Since Time In sells toys and products suitable for children in nurseries and preschools, the development of the products has therefore included a study of nursery and preschool environments.The thesis has been carried out within the Product Design subject area at the Department of Management and Engineering at Linköping University. Concept development has been done in three phases: the Preparation phase, the Design phase and the Presentation phase.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

The following report is based on the graduate job course in CAD technician program year two. The work reflected in the report is done in collaboration with Hans-Erik Eldemark. This work includes the development of a progress bar for dishwashers.The execution of the thesis has involved a list of criteria with conditions and requirements, which after where weighted in a matrix. Subsequently, the product proposal was developed and has been divided into three categories, twist mechanisms, attachments and exterior design. Finally, suggestions have been designed in CATIA V5 and prototypes were produced using 3d-printing.

Northern Stories is a narrative video-project, mixed between how to work with the movieformat and the programs involved. As well as the complexity of how it can be to work in collaboration with a company and an investigation in how to evolve my design process. This from a designer?s point of view and with the intention to produce a finished product..

Projektet behandlar det sublima i relation till arkitektur; både som händelse, diskurs och institution. Genom ett event som dynamisk förskjuter arkitekturens parametrar och sätter dessa i kontinuerlig förändring i relation subjekt-tid och objekt-rum. Ett gränsöverskridande erfarande av arkitektur..

There is something magical about shoes?They can create an irresistible desire or be the one thing that we want to get rid of the most at the end of a long day. When people by shoes the chose more out of appearance rather then comfort. The result is a fact. The feet feel tired and soar after a couple of hours and the only thoughts are about the aching feet that firmly object to the way there being treated.

Since my experience is that teachers in singing hardly ever talk about when to sing a tone, I have chosen to examine this fact through interviews and earlier research in this matter. The interviewed singing teachers belong to different genres (classical music, pop/rock, jazz and folk music). I asked them to share their thoughts about the word timing, when it comes to music. I also wanted to know if they have any methods when it comes to teaching students to improve their timing. Further on, I have been discussing the results and the literature in order to make clear in what way singing teachers give priority to when a tone is being sung.

The purpose of this thesis is to analyze how the ongoing controversy surrounding the Internet, the phenomena of digitalization and file sharing will affect the music industry in the form of the ?big five? labels. Furthermore the thesis aims to present a recipe of strategies for the companies? survival by studying their situation through a theoretical perspective in conjunction with a comparative analysis with industries facing the digitalization challenge. The theoretical contribution lies in the strategic perspective at an industry level.

I denna rapport redovisas arbetsgången för produktutvecklingen av ett rullstolsunderrede med nya design- och konstruktionslösningar. Det slutliga konceptet är ett underrede med två centrala konstruktionslösningar; en hydraulcylinder som medger vertikal sitthöjdsjustering, samt en vaggfunktion i sittplattan som medger ökad balans vid vinkeljustering. Samtliga funktioner på underredet har anpassats för att erbjuda ett enklare och renare ramverk..

När man går på bio eller sitter hemma i soffan och ser på film tänker man sällan på filmens egentliga innehåll och symbolik. Man ser på filmen för att slappna av eller för att tänka på något annat. Syftet med denna uppsats är att framförallt analysera de kvinnliga karaktärerna i Lord of the Rings ur ett genusperspektiv och att höja medvetandet om dessa karaktärers roll i filmerna. Framför allt kommer fokus att ligga på de tre kvinnliga gestalterna som skildras. Jag har även valt att kortfattat behandla karaktären Rosa Kattum, som kontrast till de andra kvinnorna då hon skiljer sig från dem på ett för uppsatsens syfte intressant sätt..

This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.