The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

A common assumption in marketing is the wider variety of product a corporation has, the better for the consumer: more product - more choices. Companies often develop a line extension to broaden consumer range through product attributes including quality, function and design. These developed attributes within the product are not always optimal for the consumer. As a result, companies often become entangled in having a price higher than the cost and benefit of the products. This essay aims to analyze the consumer value of line extension products and how these evaluations relate to extended line product pricing.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

Since the 1950s, the development of modern rotation forestry in boreal Fennoscandia has resulted in a severe reduction of older forests, and a high degree of fragmentation among the small patches that remains of old forest. In Sweden, when performing conservation value assessments in order to identify and preserve the remaining forest habitats, the government authorities use to a significant extent a set of indicator species that indicate habitats of high biological conservation value. One species considered to indicate high conservation values in pine-heath forests is the red-listed ectomycorrhizal (EM) macrofungi Sarcodon scabrosus (Fr.) P. Karst. In the present study, the validity of using S.

The aiming with this project is to find out if a small scale chicken production can be profitable, from day-old chicks to a processed smoked product out to stores and consumers. The products will not be available in the stores all the time because we will give the customers quality rather than quantity, so when the product can?t be found in the stores the customers will ask for it. The conclusion I found out is that it might be hard to raise chickens in these scale from an economic point of view the costs for transport, logistics, slaughter and marketing are to high..

This work describes the process from sketch to functional textile. Starting points are thoughts about the transition from sketch to fabric, and the possibility to sketch before decisions are made about the quality of the final fabric. The first result of this study is the final product, a hand weaved clothing in thin wool that fulfils set demands. The second result is the knowledge that it is possible to make a purposeful sketch without knowing the final product..

Artificiella ekosystem är en tillämpning av artificiell intelligens som har funnits länge. Användningsområden för artificiella ekosystem innefattar främst biologiska simulationer men även andra typer av simulationer förekommer. Genom att simulera individuella djur blir den artificiella intelligensens uppgift att styra djurens beslut utifrån dess individuella förutsättningar och kamp för överlevnad. Detta arbete behandlar frågeställningen vilken beslutsalgoritm som är bäst lämpad att för att använda till ett artificiellt ekosystem i ett spel. Två beslutsalgoritmer jämförs, en dynamisk som bygger på maskin inlärning och en statisk som inte är kapabel att lära eller minnas.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

This study examines retail atmospherics from a reality perspective. The topic "special exposure" has received research interest in the past but it has not been recognized as a critical consideration in the daily retail business. Too many retailers leave assortment decisions to thumb rules or trial and error. The highest aim of this study is in addressing that gap between theory and practice. To catch the attention of the customer is important in supermarkets because most grocery purchase decisions are made at the point of purchase.

AbstractThis thesis was conducted by Jenny Jansson and Maria Madsen, students at the Faculty ofTechnology and Science and the Innovation and Design Engineer programme at KarlstadUniversity, during the spring 2008. The thesis covers 22,5hp for each student. AnnaHolmquist and Chandra Ahlsell at the company FOLKFORM were the ones who requestedthe theis, their company are located at Stora Skuggan in Stockholm. Tutor for this thesis wasLennar Wihk and the examiner was Monika Jakobsson of Karlstad University.The given assignment came from FOLKFORM and the aim for the thesis was to create afurther development of two already existing lamps from an earlier collection at FOLKFORM,?Jaipur? and ?Modern Times?.