The purpose of this thesis is to study and determine how working in cross functional teams can generate value in an effort to facilitate innovation. An inductive scientific perspective is chosen as the research approach. A single case is investigated with the theoretical framework based on Resource Based View, Intellectual Capital, Innovation theory and theories concerning Cross Functional Teams. The empirical material has been collected through primary data; surveys, interviews and secondary data; literature, websites and further complementary data. The practice of using Cross Functional Teams will enhance organizational learning, knowledge transfer, increase communication and innovation, which in turn will increase the speed and performance of the new Product Development Process.

The industrialized timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

This is a thesis written for a master's degree at the Computer Vision Laboratory, University of Linköping. An abstract outer product is defined and used as a bridge to reach 2:nd and 4:th order tensors. Some applications of these in geometric analysis of range data are discussed and illustrated. In idealized setups, simple geometric objects, like spheres or polygons, are successfully detected. Finally, the generalization to n:th order tensors for storing and analysing geometric information is discussed..

Målet med detta examensarbete var att utvärdera produktutvecklingsmetoden Needfinding genom att studera tillgänglig litteratur och genom att implementera denna metod i ett praktiskt fall. Sättet detta genomfördes på var att påbörja arbetet utan någon given problemställning. Detta innebar att första delen av arbetet användes för att klarlägga och konkretisera ett sådant. Sedan kunde utvecklingsarbetet påbörjas för att hitta lösningar till de belysta problemen. Fokus lades slutligen på varuhanteringen inom dagligvaruhandeln där både ergonomiska och miljömässiga förbättringar skulle kunna genomföras..

Aren?t you tired of never finding stuff? Take a bits as example, do you store these lose in your toolbox or carpenter belt? What if you could have it all accessible and assembled in a tool, always at arm?s reach?Today bits are used together with electric screwdrivers and handheld screwdrivers in a greater spread. For these different types of storage, from pure storage boxes to complex tools with storage built in, exist. The professional craftsmen commonly use some kind of box where the bits can be stored. Even so they tend to store their bits loose in a carpenter belt or toolbox, since they want the speed and accessibility of carpenter belt over the storage box?s tidiness.The project was started in the fall of 2010 and a referents group was early put together to ensure that the developed product became as user-friendly and attractive as possible.

Ipendo Systems in Linköping, Sweden, is a small IT consulting firm developing among other things custom portal applications based on Microsoft Sharepoint 2010. The purpose of this thesis is to investigate whether the test tools TestComplete and LoadComplete provide sufficient compatibility for functional and non-functional testing of Ipendo Systems? Sharepoint based applications, as well as design testing related activities to be incorporated into their existing software development framework. A test process maturity framework was chosen and applied for the design of the testing activities, while the test tool investigation resulted in guidelines on how to apply the tools effectively and circumvent any issues discovered..

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

Tanzania is today one of the greatest aid recipients in the world, but still - after over 45 years of huge amounts of aid - one of the poorest and least developed countries. How can that be? Civil society is said to benefit the democratization process, but has not succeed in Tanzania. Has the extensive aid had any impact? Our purpose is to investigate this set of problems.We are using theories concerning civil society and aid in general, and the theoretical framework developed by Hadenius and Uggla ?Making Civil Society Work, Promoting Democratic Development: What Can States and Donors Do??, in particular.

All inclusive travel has become a popular way to travel abroad. When tourists pay for everything in advance their need for contact with the local people will be reduced. The consequences of this can be dissatisfaction from the local people as they are left out and do not share the financial benefits created by tourism. During the purchasing cycle of an all inclusive travel, it is possible that the tour operator can influence a sustainable development.The aim of this paper is to compare how a large and a small tour operator in their purchase of all inclusive holidays interacts with local players to create sustainable development, thereby creating a surplus value to the customer. The hypothesis is that the amount of knowledge and application of this knowledge regarding sustainable development differs in the purchase process between large and small tour operators.This paper was carried out as a case study.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

My objective for this project was to create a short but thrilling 2D-animation intended as promotion for an online comic book. The purpose of the project was to learn more about animation and graphics, to further my artistic skills and to learn how to work in Adobe After Effects. I also wanted to learn more about scheduling, project methods and how to handle stress. During the ten weeks of the project I have created the story, the storyboard, the character design, the backgrounds and the animation. The voice over was recorded with the help of a fellow student who also made the music and the sound effects.

The most dominating type of company in Sweden is the small-sized business and it usually lacks its own marketing department. The purpose of this paper was to analyze several small Swedish businesses which are specialized in different sectors of the Mechanic/Technology industry but they are similar in terms of having niched products and they are leading companies in the world. The objective was to do research about how small businesses work with marketing despite its lack of resources and capital.This survey has shown that customer contacts, customer relationships and especially for those investigated companies, it was very important to focus on globalization and product development in order to build a Point of Difference..

The Swedish real estate market has experienced an intense increase of demand during the last ten years. Thus, people regularly visit real estate websites, as well as home improvement and interior design have become extremely popular. However, the Swedish real estate agencies still have not developed a theoretical framework on how to most effectively market the properties. The main purpose of this study was to investigate how interior in apartment advertising affects the buyer's interest in the apartment, and furthermore to start building a framework for how to effectively use interior as a marketing tool. The study connects theory regarding social identity, advertising effectiveness and product personality in order to investigate consumer behaviour in the real estate market.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Networking is an important part, for organizations, in the recruitment process. This since the emergence of Internet networking has become more common and the organizations finds that networking is applied more frequently in the recruitment process. Organizations have noticed that networking often is a more cost efficient option compared to traditional recruitment. Since networking in the recruitment process has increased, we intend to investigate if and how it affects the composition of organizations. This thesis aims to examine networking in the recruiting process, and aims to make no differences between networking offline and online.