This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

Purpose ? The purpose of this study is to identify and describe how consumer perceptions regarding information quality, sender credibility and effect of eWOM-communication differ between Facebook and Prisjakt.Approach ? Based on previous research an analytical model was designed. The parts in the model were the aspects of the problem which the present study aimed to examine. An experimental design was applied in which ten students at Örebro University were exposed to a scenario where they took part of eWOM-communication concerning a specific product on Facebook and Prisjakt and then had to answer questions in an interview. The analytical model formed the base of the interview guide used in the interview and the specific product was chosen with help from a focus group.Implication ? The study illustrates that consumers may perceive the quality higher on Prisjakt while the sender credibility can be perceived higher on Facebook.

The purpose of this study was to examine and evaluate an assembly station at Kalmar Industries in respect to ergonomics. The study was to result in an improved assembly station with lower risk of work- related injuries. It was the study group?s expectation that the measures taken at the assembly station can function as guidance and an inspiration for other ergonomic improvements at the company. Several goals related to the purpose were established as guidance for the study.The mechanic?s work situation was mapped through a series of methods.

Bachelor thesis ? ControllerEconomics, Linneaus UniversityTitle:From data to information ? a case study at Södra Cell Mönsterås Authors:Sofie Gotting, Renée Lundberg and Emma Molin Tutor: Anders Jerreling Examiner: Fredrik Karlsson In Sweden, the process industries employs nearly 600 000 people and it accounts for about 60 percent of the country's net export. In many industries today, there is a growing emphasis on calculations. They are used to manage and control the activities in today?s organizations, one of these industries is the process industry.

The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

Over the past decade, the fashion industry has experienced a relatively high rate of consumption with material and clothing becoming increasingly subject to waste and disposal. As a result of the increased awareness within the industry the interest in CSR (Corporate Social Responsibility) amongst retailers has increased substantially in an attempt to shy away from the critically amplified media attention. In addition the underlying demand from external stakeholders has forced companies to ensure they focus and act upon each stage of the product life cycle.This study provides a further in depth analysis of the fashion industry and conveys the key messages and steps that firms are taking in response to the external pressures and requirements based on four different merged process areas. This research paper examines the impact of CSR on two Swedish fashion retailers Åhléns and JC and shows how accountability relates to the external expectations and norms that prevail in society. The result shows that the firms do meet the demands within each sub category as a response to market demands.

The purpose of this thesis is to contribute to a further understanding of the complexity in green consumer behaviour by examining how and why individuals priorities values, personal norms and identity in green consumer behaviour. The thesis employs a qualitative approach with an abductive strategy. The empirical data was produced through in-depth interviews with green consumers. Based upon the empirical findings and theoretical concepts, a conceptual model was introduced to illustrate how consumers prioritise between several values when assessing green products. The prioritisation is dependent on internalised values as well as the product function and the need that the consumer seeks fulfilled.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

An attempt was made to GFP-tag the effector proteins of AvrLm6 and AvrLm4-7 using the GFP-tagging gene knockout method (GGKO) developed by Saitoh et al. (2008) in order to determine whether or not they are secreted. Successful pETHG-(target)KO vectors were not generated. The protocol was examined for potential errors. Fatal errors were pinpointed to the ligation reaction and the transformation required to generate and propagate the desired vector pETGH-(target)KO.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

This report has explored how to design and develop an ordering system for television and DOOH commercials. Usability theories have been considered and also guidlines for system devoloping, this includes the making of a PACT analysis and a demand specifcation. To ensure that the users of the systems are in focus a pre studie has been performed on location of the company which is the intended user of the system. Finally an interactive prototype of an orderingsystem has been created to illustrate the functions and tools which the fnal product should have..

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

The purpose of this thesis is to present and describe which criteria, according to the systemfamily Configuration Management, should be met when developing a CM-tool to handlemigration data.ACT is a tool developed by Microsoft to gather information about, analyze, test and mitigateapplications in a network when migrating the IT-infrastructure of an organization to a newoperating system. The organization that is being studied wants to present the data about theanalyzed applications in such a way, that a customer can choose what to mitigate and migrate.The goal is therefore to develop a prototype (CM-tool) that will present this data.The study has shown that ACT lacks certain requirements stated by the organization when itcomes to presentation. But when it comes to the rest of the functions, ACT performs as expected.The investigation resulted in specifications and technical solution for the new CM-tool. CMcriteriafor migration data was put forth and parts of the prototype were also developed..