The purpose of the project was to design an electric bicycle to offer thetarget group youth an attractive alternative to mopeds. The basis for theproject was user studies in which young people were interviewed andobserved in their daily environment.The project resulted in a product, designed with the focus of integratingthe battery to the shape, to create a wholeness that is simple andintuitive.!The product is easy to use and operate, with an automatic transmissionengine.! A smart modular system allows the user to choose design withmudguards, rear rack, or without. The battery design is based on "cradleto-cradle" to maximize the battery life and minimize environmentalimpacts.It was very fun and rewarding to have the opportunity to present theresults for the youth who showed great interest in the product.The project was conducted in collaboration with Designit and Cycleurope..

At present Getinge can offer a new generation of trolleys that they produced in 2011. The trolley used to Getinge various autoclaves and has the primary task to help the user/sterilization personnel to transport shelves or baskets, with or without cargo, from a packing table to the autoclave. The purpose of this thesis has been to develop a primary solution how the docking process between Getinge trolleys and autoclaves can be improved. The work has in most part followed Fredy Olsson principle and primary construction method. The work has included product research, study visit and development of a requirements specification, to satisfy Getinge, their clients and circumvention products requirements.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

More and more companies open up facilities and stores in countries all around the world. Entering a new country means a new culture, a new language, different norms and values and new people with a different way of thinking unlike what you are used to. In order to survive and be successful in this new country means that you have to adapt to the new culture and its components you encounter.The purpose of this thesis has been to identify possibilities and barriers in the Middle Eastern culture affecting international clothing companies. Furthermore it has been investigated how these companies must adapt their products and promotion to this culture.In order to obtain relevant data for achieving the purpose of the study interviews and observations was made at three international clothing companies in Tehran, Iran. These were Mango, United Colors of Benetton and adidas.

!is began as a product design challenge, which stipulated broadlythat the designer be ?inspired by a subject?, whose ideas would leaddown a path of product idea evolution. From there, the goals forthe end-product would undergo rigorous revisions, re-de#nitionand re#nement. !e end-product itself would be the result of anentire thinking process.!e subject I have chosen is: Time. I want to challenge and evenalter our conventional sense of time, using principles ofdesign.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

The main purpose in this degree thesis is to investigate changes in performance when introducing a newly produced Real-Time database in one of CC Systems products, the Diagnostic Runtime Engine, DRE. The thesis is a collaboration between CC Systems, creator of DRE, and Mimer AB, developer of the Real-Time database.The result reveals that the time spent on database access is considerably lesscompared to the originally used database. The research has lead to several additional requirements on the real-time database and these are presented as part of the result in this thesis. The additional features will help making the product more suitable for DRE and similar applications.Additional research is required to be able to recommend the use of this product or not. Primarily the performance in another operating system, Windows CE, but also the introduction of additional features should be investigated.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Background: Mass customization has been identified as a competitive business strategy by both companies and academics because of its ability to incorporate the voice of the customer into companies? products and services. Although mass customization may sound appealing, the strategic concept is still developing and firms adopting this business strategy face several challenges. Production concerns are of high relevance since mass customization implies a high level of customer involvement in the product design. Since the areas are closely linked it is reasonable to ask how a mass customization strategy affects production concerns.

In 1993 the internal market within the European Union was formed and ensured free movement of goods, services, capital and people. This led to the removal of trade barriers between members of the European Union. When opening up for competition, price differences between countries decreased and more jobs were created. A single currency was introduced by eleven countries in 1999 with the goal of reducing transaction costs, eliminating exchange rate risk and to further simplify trade. In 2001 Greece joined the collaboration and introduced the euro.

Title: Experiences of Banner advertisement on a specialized homepage Author: Marcus Westerberg Supervisor: Marie Hemming Department: Department of Business Administration, IEM Course: Bachelor thesis in Business Administration, FEC 007 Purpose: Create a understanding for how the users on Internet pages experience the occurrence and the shape of the banners. Method: Methods used are quantitative and qualitative, and the facts and figures are based on a pop up inquiry and some telephoneinterviews. I elected pop up inquiry and telephoneinterview as my data collection. My inquiry had a high grade of standardization and the interviews had a low grade of standardization. Result: On the basis of the question of issue I have drawn the conclusion that the users feels that it is important with information in all advertising.

In an ever more competitive environment Sandvik Materials Technology,SMT, runs a large-scale program to improve their processes for product development.The purpose with the program is to increase the company?s profitability by increasingthe number of new products in their product portfolio. The strategies SMT is usingfor reaching their goals are to change the way they work with product development byreducing lead time and learning how to prioritize products with the highestprofitability. In the R & D Department the work of improvement pursue by adaptingLean R & D to their way of working. Lean R & D encourages working withcontinuous improvements and eliminating waste.The main purpose for this Master?s Thesis is to develop didactic support to make iteasier to implement Lean in SMT R & D department.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.