The project was intended to produce a brush simulation plugin to the image processing program GIMP which would use a 6DOF drawing tablet for user input.Too ambitious goals coupled with compability issues between the resources used resulted in that no meaningful software was produced. Experience was however obtained, and this paper is intended to give an overview of relevant concepts for- and the process ofcreating a brush simulation..

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

In today's agriculture efficiency and the capacity of tools and machinery are crucial. In this work we investigate whether it is possible to enhance the capacity of sowing by increasing the work speed of seeders, how seed technology affects seed placement, and if there is any difference between two different brands of seeders and their sow techniques. The seeders we have chosen to compare are Väderstad Rapid drill and Amazon Cirrus drill. The tillage capacity of the seeders and their traction power needs were examined as well.Väderstad Rapid and Amazon Cirrus were tested in a randomized block design with four replicates at three different speeds, 8 km/h, 12 km/h and 15 km/h. The seed placement at the different speeds was examined by dividing the seedbed into four different zones from its surface to its bottom.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

Performance of an intersection affects the total travel time in a traffic network. An intersection with good performance can easily be described by its contribution to lower travel time than in a comparable intersection. The travel time is of importance in the cost calculations when a specific intersection is to be chosen and designed. It is important to be able to make correct and precise performance calculations so that the cost calculations will not be incorrect. For that purpose the software Capcal, which is a traffic model for intersection analysis on performance, is used in Sweden.

The aim of the present study was to estimate the correlation between Euro NCAP pedestrian rating scores and injury outcome in real-life car to pedestrian crashes, with special focus on long-term disability. The study also surveyed most frequently injured body regions and risk differences for specific elements of pedestrians hit by cars. Another aim was to determine whether Brake Assist systems affect the injury outcome in real-life car to pedestrian crashes and to estimate the effect in injury reduction of a high Euro NCAP ranking score combined with Brake Assist.In the current study, the Euro NCAP pedestrian scoring was compared with the real-life outcome in pedestrian crashes that occurred in Sweden 2003-2010. The real-life crash data was obtained from the data acquisition system STRADA, which combines police records and hospital admission data. The medical data consisted of International Statistical Classification of Diseases and Related Health Problems (ICD) diagnoses and Abbreviated Injury Scale (AIS) scoring.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

In 1996 a hunting test for British gun dogs was started in Sweden, based on a similar one al-ready in place in Norway. The aim of the new test was to describe the hunting ability of the dog and to use the results as a basis for selection. However, up to now, no genetic study of these data has been done. Therefore the aim of this study was to estimate genetic parameters for the traits measured in the hunting test and to investigate whether the traits can summarized into fewer overall measures. Data from trails of British gundogs between 1996 and 2005 in Sweden were used to estimate genetic parameters and environmental effects in hunting performance. British gundogs consist of five different breeds: Pointer, English setter (ES), Gordon setter (GS), Irish red setter (Irl S) and Irish red and white setter.

AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

This report deals with the modeling of a part of the communication system based on the IEEE 802.11a standard which represents the next generation of wireless LAN with greater scalability, better interference immunity and significantly higher speed, up to 54 Mbps. 802.11a uses Orthogonal Frequency Division Multiplexing (OFDM) where modulation is performed by an IFFT and the demodulation by an FFT. After modeling the FFT in Matlab and C, the FFT implementation has been validated using a soft microprocessor core by Xilinx (Microblaze) and the results were compared..

At Flight and Systems test Saab AB, a post-processing software is used to process GPS data. A new software by the name GrafNav has been purchased and the purpose of this master thesis therefore became, partly to make a judgment regarding GrafNav?s ability to estimate position, velocity and accuracy, partly to if needed improve the estimate and finally find one or several methods to estimate the position and velocity accuracy. The judgment of GrafNav was performed partly by a comparison to the former post-processing software (PNAV) and partly by a comparison to the airplane?s inertial navigation system (INS).

Aim: To investigate if physical exercise in combination with coaching will reduce pain and improve knee function in patients with mild to moderate osteoarthritis in the knee compared to physical exercise alone.Method: The study consisted of 42 patients who were randomized to either an intervention group or a control group. Both groups followed a standardized training program at home, but the intervention group received additional support with regard to the aim of their training, as well as extra coaching during the training period of ten weeks. A Visual Analog Scale (VAS) was used to evaluate the patients? pain. A 10 metre walking test, the Index of Muscle Function (IMF) and the Knee injury and Osteoarthritis Outcome Score (KOOS) were also used to evaluate knee function.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.