Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

This project was led on behalf of Bombardier Transportation in Västerås, Sweden, incollaboration with KTH Stockholm and EPFL Lausanne. This project is connected to thedevelopment of a new and simplified tilt system for rail vehicles.Growing competition from other means of transportation has forced railway companiesthroughout the world to search for increased performances.Travelling time is the mostobvious performance indicator that may be improved by introducing high-speed trains.They require very large curve radii and long transitions curves not to impairridecomfort, another performance indicator. Building new tracks adapted to high speedtrains is very costly and can only be justified where the passenger base is large.Trains with the capability to tilt the carbodies inwards the curve is a more cost efficientalternative. The tilt inwards reduces thelateral force felt by the passengers allowing thetrain to pass curves at enhanced speed with maintained ride comfort but increases thefrequency ofmotion sickness.The benefits of tilting trains are improved speed capability in curves and enhancedpassengers comfort, but at higher buying and maintenance cost. As the conventionaltrains increase their speed in curves, the performance advantage of tilting trains isreduced while their prize is still kept significantly higher and constant.

The aim of the present study was to investigate response time variations in tasks for assessment of high level language functions and how response time is related to education, age and gender. Response time is defined as the time to complete a task after it has been presented. 103 subjects, aged 20 to 80 years, were tested with the Assessment of Subtle Language Disorders, Sentence analysis and Morphological completion. The subtest Comprehension of ambiguous sentences showed the longest response time and Morphological completion the shortest. Correlations were found between increasing age and longer response time for Comprehension of metaphors and between education and response time for several subtests.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Syftet med examensarbetet har varit att undersöka om Mt Memotekniks produkter uppfyller ISO/IEC 11801:2 standarden, eller om de med hjälp av kondensatorer kan klara kraven för överhörningar. Vi har även jämfört deras produkter med AMP?s Keystone jack som redan klarar kraven för Cat 6 standarden. Memoteknik tillverkar en kretskortsprodukt som består av nätverksmoduler för Ethernet. Dessa kabelsystem skall uppfylla en viss standard för kategori 6.

WebGL is a standard for drawing graphics in a web browser. Currently it isn?t widely understood how consistently WebGL performs across a majority of the de- vices that support it. Determining if an image looks correct to a human observer is an interesting problem. The solution for this is useful when developing WebGL applications, since a developer could make better informed decisions during de- velopment.

Transmission of digital signals is today more frequently used than transmission of analog signals. One reason for this is that a digital signal is less sensitive to noise than an analog, another reason is that almost all signals today are handled in a digital format. This thesis describes the development of a system that receives digital video signals through FireWire. The standard for FireWire, which is a high performance serial bus, is under development. Today the standard of the bus supports transmission of data with a speed of up to 400 Mbit/s.

A new theory for predicting the windprofile over a canopy has been evaluated. The theory was first presented by Harman and Finnigan (2007). The theory relies on the forming of a mixing-layer above the canopy, due to different mean wind in and above the canopy. Characteristics from both mixing-layer and Monin Obukhov similarity theory have been used to develop the governingequations that give the wind profile. The theory has been used to calculate wind profiles for sixdifferent atmospheric stabilities.

During cold winter days it is likely that people in buildings with older windows or high glass facades experience thermal discomfort due to cold air down draughts. Earlier work has been aimed at finding analytical methods to predict the speed of the airflow in a room and in practice heating appliances are often placed beneath the windows to reduce the draught along the floor. In a study from 2012 Mohammad Parchami developed a method for estimating the required heating power to counteract the downdraught with such heating appliances. In this study, Computational Fluid Dynamics (CFD) was used to evaluate the usefulness of Parchami?s method and also to examine the potential of adapting the depth of the inward window sill as a means of decreasing the down draught.

The aim of this study was to understand how social workers deal with honour-related violence, with special focus on the processing from sheltered housing. Our qualitative interviews with social workers that work with this kind of problems show that there are both obstacles and opportunities in the processing from sheltered housing. On the negative side are the loneliness, the shame and the guilt that the girls may experience when they need to leave their families. The social services can both be an obstacles and an opportunity. When the girls need to create a new life in a new city they have a lot of opportunities and in the same time it is hard to get to know new friends when you don´t know the city or have much money.

I denna uppsats undersöker vi Export Processing Zones (EPZ) roll i ett lands ekonomiska utveckling, exemplifierat med Mexico. Fokus för uppsatsen är centrerat kring de bakåtriktade länkeffekter som förväntas uppstå som en effekt av ett EPZ-program. Fenomenet längs den mexikansk-amerikanska gränsen kan sägas ha flera orsaker, men grundas i tillgången på billig arbetskraft samt närhet till världens enskilt största konsumentmarknad. Uppsatsen visar på ett minskat FDI-inflöde, ökad sysselsättning, begränsad teknologiöverföring samt mest jobbspecifik kunskapsöverföring. Eftersom få lokala eller inhemska underleverantörer kontrakteras av EPZ-företagen minimeras länkbildningen.