This report describes the procedure in which we accomplished our task, which was to implement a present algorithm. This was made using C++. The algorithm is developed by Sasan Gooran, who is our examiner in this project. The algorithm uses an iterative method to produce the halftoned images. The reason for this project is to speed up the existing program which is made in Matlab.

During 2006 an estimated number of 150 persons are supposed to have been killed in road accidents caused by speed limit violations. Through Automatic traffic security control (ATK) the Swedish road administration (Vägverket) is working towards lowering the number of speed related accidents. By placing the speed cameras on roads they've managed to lower the average speed at those places. The enlargement of the number of speed cameras is based upon knowledge about for example how high the risk is for speed related accidents on the roads. The speed cameras always measure the speed in which every vehicle passes, but aren't constantly activated to register speed violations.

Title:?Speed cameras - an prevention of crime and a standard forming instrument of control??Authors: Markus HanssonTutors: Bo Isenberg & Carl HultExaminator: Ulf DruggeThe School of Human SciencesUniversity of KalmarThe studys purpose is to get a absorbed understanding for peoples attitude, and effect of speed cameras. The disposition for the study is to integrate earlier studies in the matter, combined with elevating interesting sociological conceptions. As an attempt to understand speed cameras as an instrument of force on the individual have Michel Foucaults concept Panopticon been used to see its effect, and it?s look upon how crime prevention will be formulated, which can give an explanation of why speed cameras are being used as an instrument of control on the traffic area.

Title:?Speed cameras - an prevention of crime and a standard forming instrument of control??Authors: Markus HanssonTutors: Bo Isenberg & Carl HultExaminator: Ulf DruggeThe School of Human SciencesUniversity of KalmarThe studys purpose is to get a absorbed understanding for peoples attitude, and effect of speed cameras. The disposition for the study is to integrate earlier studies in the matter, combined with elevating interesting sociological conceptions. As an attempt to understand speed cameras as an instrument of force on the individual have Michel Foucaults concept Panopticon been used to see its effect, and it?s look upon how crime prevention will be formulated, which can give an explanation of why speed cameras are being used as an instrument of control on the traffic area.

The simple view of reading is a theory in which reading is divided into decoding and linguistic comprehension. The theory has been used to explain and to subgroup reading disabilities. Research has also investigated if additional factors are of relevance to reading. In the present study, decoding was divided into the factors orthographic decoding and phonological decoding, while comprehension was divided into word comprehension and grammatical comprehension. The purpose was to analyze these factors and their contribution to reading ability in children in fourth grade: one group with reading difficulties (n=36) and one group with typical reading ability (n=36).

This study was conducted to investigate the relationship between perceived popularity, social information processing and working memory. With the intentions of examining popularity 209 (98 female, 111 male) children in second and fourth grade were presented with a roster of their classmates and were to nominate whom they liked and whom they disliked. To study working memory capacity a working memory test, that places demands on the participant to work both with and store the given information, was used. To examine children's cognitive processing of empathy-provoking information a cognitive appraisal interview was conducted. The results imply (a) that working memory increases with age, (b) that there is a weak relation between working memory capacity and popularity, and between popularity and cognitive processing styles and (c) that there are some strong correlations between working memory and cognitive processing styles..

The purpose of this thesis is to explore how the internal information processing and management is carried out within a unit of Viskafors municipality. Furthermore, to explore and make recommendations of how the organisation can improve its internal information management. To get a full picture I have interviewed people at different levels of the organisation. The main findings showed that there was a dysfunction in the internal information processing and management. For example the study showed that the internal information did not reach out to the different parts of the organisation due to insufficient information processing.

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.

The Swedish Migration Board has during a long time had problems with long processing times for persons that apply for asylum. The government has set targets that investigation should not exceed 6 months although it is done in almost 70% of cases.The study's aim has been to examine if steering can be linked together to long processing times and, if so, explain why. The intention has not been to provide a comprehensive picture of the problem but has defined itself to ensure steering impact. The study has been carried out by studying relevant governing documents, previous research and by interviews with administrators and decision-makers in two of the Migration Board asylum units.The analyses of the study show that a combination of inadequate steering and inadequate resources have contributed to aggravate the implementation, which has lead to long processing times..

The purpose of this thesis is to test whether firms have target capital structure, and if so with what speed they adjust toward this target. Findings that support this purpose are also in line with the trade off theory. One of the key elements of this thesis is the method used, which successfully enables fulfilling the purpose. The panel data method captures the data characteristics of the cross sectional and time series dimension. By using this approach the dynamic effects of capital structure can be studied, thus if there actually is an adjustment towards a target the speed can be estimated.

A great amount of todays drivers? are constantly exceeding the speed limits on the roads. As a consequense of this, a large number of speed redusing devises, for example speed bumps, has been built around the country. As reports in local medias point out, the acceptance for these types of speed reducing devises, differs and there are many thoughts about location, construction and effect on the traffic safety. This paper approaches the complexity of these problems from the drivers? point of view, based on literature studies and a questionnaire. The goal is not to argue for or against speed reducing devises, but to try to find the source of annoyment and how to proceed further. Some of the problems turned out to be easy to fix, for example porly marked speed bumps.

In order to reduce the price for, and improve the performance of automatic control systems for magnetization of synchronus generators, the possibilities of using a PC based software PLC system, Programmable Logic Controller, has been investigated. The result is a system based on the CoDeSys software PLC with runtime environment from 3S-Software, communicating with external units via Modbus fieldbus. System price is reduced from ?5000 to ?2000 and system Processing speed is reduced from 10 ms for a Siemens S7 PLC to 4 ms with the CoDeSys PLC system though unsolved problems with runtime seizure caused by improper settings in the PC BIOS..

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

The study was conducted with an landscape approach with an subject related approach in the field of environmental psychology to investigate how road design affects drivers' choice of speed. The purpose was to portray road environments on thoroughfares in urban areas to motivate motorists to keep the speed limit and thus increase road safety for vulnerable road users. The task question was formulated, how can thoroughfares in suburban settings be portrayed to motivate motorists to reduce speed? The study was conducted throughout a literature review of motivational speed measures along with interviews with road design experts at the Swedish Transport Administration. Case studies were conducted on three thoroughfares in the Stockholm suburbs Vallentuna, Upplands Väsby and Danderyd.

GPGPU is a collective term for research involving general computation on graphics cards. A modern graphics card typically provides more than ten times the computational power of an ordinary PC processor. This is a result of the high demands for speed and image quality in computer games.This thesis investigates the possibility of exploiting this computational power for image processing purposes. Three well known methods where implemented on a graphics card: FFT (Fast Fourier Transform), KLT (Kanade Lucas Tomasi point tracking) and the generation of scale pyramids. All algorithms where successfully implemented and they are tree to ten times faster than correspondning optimized CPU implementation..