This study focuses on a specific organization of a Security Operations Center (SOC) as a case studyto first identify specific challenges related to the work process, preceding with identifying whichprinciples from various process models, such as agile and traditional methodologies from softwaredevelopment companies, can be implemented. Initially, the study presents relevant research on agile and traditional process models as well asresearch on SOC. Subsequently, six semi-structured interviews are planned and conducted withemployees within a specific SOC-type organization to identify the current work process and thechallenges affecting the organization?s work process. The results of this study indicate a description of the current work process in the organization aswell as a variety of challenges related to technical and organizational issues.

Uppsala University is involved in a large international collaborationto build the Laser heater system for the European Xray Free-electronlaser in Hamburg, Germany. In this thesis I describe a laser incouplingdevice into the vacuum chamber of this laser heater all the way fromthe specifications to a completed design.The laser heater is a very important part of the XFEL and thepart described here is a part of the vacuum system needed to couplean external laser into the electron vacuum system and align it withthe electron bunches in order to heat them. The task was started by studying the literature about the basic theory andthe design of vacuum systems. After this study and collection of ideaswith colleagues I started to prepare different concepts to solve thetask. The ideas can be put into two categories, in one case the couplingmirror is located inside the vacuum chamber and in the second caseoutside.

This thesis is the result of the author?s interest in music and electronics, namely the design and manufacturing of a stereo sound system with an active crossover. In short it can be stated that an active crossover has many advantages over its traditional passive counterpart. The active design naturally results in a more complex system comprised of a multiple number of components. This report deals with the theoretical aspects of preamplifiers, crossovers and power amplifiers as well as power supply and control.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

The creation of Region Skåne, and the transfer of the development responsibility from the national administrative country board (Länsstyrelsen) has given the state new challenges. New structures have grown between Region and State, and also between different municipalities. These can be characterized as Policy-networks, and the goal of this study is to analyze the planning process of the regional infrastructure with these theories.This is a qualitative study of the infrastructure process in Skåne, and the actors that acts within this process. It has been studied with the eyes of the theories of Governance and Policy-networks. The main method to collect material has been through interviews with different actors within the process, and very little written material has been used.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

The purpose of this paper is to analyze and map out the cyber culture of the Internet and its all users, identity, design theories and services. How people communicate and how they build up their identities are some of the baselines. I will also discuss the important aspects of Interaction design and how this can be used in a Community for digital storytelling. The Internet, or new media, was founded in the 60?s by some great philosophers (McLuhan, Rheingold, Lambert and more). With influence from their books I will discuss and analyze what kind of media the Internet is and how it can be seen as extensions to our senses, as McLuhan claims.

To make a company or an organization reach a goal it requires the right way of thinking when recruiting new employees. One mistake and one wrong recruitment can cause a company or an organization huge expense, which are possible to avoid. A right recruitment is about having a good recruitment process which will support the right decision when choosing new employees. The purpose of this thesis is to do an analysis on three recruitment companies recruitment process and show the significance of the recruitment process for hiring the right person for the right position. The information for this paper has been collected through interviews and literature which concerns this subject.

The theme of this thesis is citizen participation in the planning- and design process. It turns to everyone that studies landscape architecture or work as landscape architects and I hope that it can function as a ground for discussions as well as a source for inspiration. Rågsved is a suburb south of Stockholm. Just outside the centre of this suburb, a small industrial area called Snösätra, is located. In a few years time the leaseholds for the small industries will expire and the key question is: What will happen then? This is my general concern and it was the main cause for me to start this particular work. How do you attend to a place that appears like blank sheet of paper? To an empty page that can be filled with an infinite number of different formulations.

The acquisition process as an object for research and empirical studies have increased in importance during the past decade. The purpose of this thesis is to investigate this process further. This was done by reviewing previous research covering the area of mergers and acquisitions. Seven key factors that should be considered in an acquisition process emerged; acquisition project management, planning, communication between the acquirer and the potential target, goal alignment within management, company-cultures, a trade-off between a certain speed in integrating the companies and consideration of the employees, and finally the follow-up. These factors have been shown to increase the likelihood of value creation in acquisitions.

Transportbranschen kan beskrivas som samhällets blodomlopp och vi är alla beroende av dess tjänster i vårt dagliga liv. Men denna bransch står inför stora utmaningar. Konkurrensen har drivits så långt att vissa aktörer bryter mot lagar och utnyttjar lågavlönad personal. Vilka är konsekvenserna av denna situation? Och vad kan man göra för att vända på denna trend? Sebastian Brännvall har utforskat hur man kan förpacka information så att denna sticker ut och väcker intresse hos en bredare massa.

The aim of our study has been to come to an understanding of how the executive officials within the care of the elderly experience the cooperation with relatives to elderly people who is in need and apply for public home help according to the law of social services. Our expectation of this study is that we gain an increased insight how they as executive officials manage this cooperation situations. The method we used in this study has a qualitative research approach. This design was chosen as the most appropriate approached to illuminate and exploring the experience of the executive officials. Nine executive officials has described their experience in this matter in an interview were we both participate.

Detta examensarbete är det avlutande momentet på civilingenjörsutbildningen Ergonomisk design och produktion vid Luleå tekniska universitet. Målet med projektet är att designa en helt ny skotermodell exteriört. Tyngdpunkten i projektet är utseendet men även andra aspekter behandlas, så som ergonomi, materialval och tekniska lösningar. En Internetbaserad enkätundersökning, marknadsundersökning samt systematisk problembehandling ligger till grund för designen av fyra grundkoncept. Dessa undersöks genom strukturerat konceptval samt samråd med uppdragsgivaren.

Syftet med uppsatsen är att bidra till ökad förståelse om samhällskunskapsundervisningens innehåll, genomförande och utformning på gymnasiet där digital teknik används.Fokus i uppsatsen har legat på att genom observationer och intervjuer i tre klasser och med de två lärare som undervisar klasserna få inblickar i hur lärare designar undervisning och hur elevrollen kan förstås när digital teknik används i ämnet samhällskunskap. Till hjälp för att analysera resultatet har analysmodellen Learning Design Sequence och i synnerhet  begreppen lärsekvenser och iscensättning använts. Det senare begreppet syftar på faktorer såsom lärarnas arbetssätt och tillgängliga resurser som präglar en lärsekvens, vilket kan vara elevernas arbete med en uppgift för att nämna ett exempel.Resultatet visar att datorer och Internet ofta i någon form ingår i lärarnas design av undervisningen. Exempelvis har lärarna genomfört genomgångar med hjälp av Powerpointpresentationer samt utformat uppgifter där elever ska använda sig av sina datorer. I elevrollen ingår bland annat att vara dator- och Internetanvändare men också av att anteckna och lyssna.

Scania InfoMate develops web applications that support truck distributors and workshops with the necessary tools for an effective maintenance process. However, the end-users of these applications are faced with as many different graphical interfaces as there are applications. As a consequence, important effects of recognition are lost, developers spend unnecessary time designing new solutions for each application and Scania InfoMate does not present a homogeneous brand image towards its customers.Therefore the aim of this study is to give a suggestion of how a standardized graphical interface for web applications at Scania InfoMate should be designed. The given suggestion should come from thorough investigation of both end-user needs and recent research within the area of usability. In addition to a standardized interface this study also aims to deliver guidelines that support future web application development at Scania InfoMate.Through a combination of methods, mainly heuristic evaluation and user interviews, an elaborate description of usability and consistency problems in a defined web application portfolio is produced.