The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This is a report for our thesis that was conducted as a conclusion of our bachelor degree in Business engineering at the Royal Institute of Technology (KTH). The work is done in cooperation with the firm Navigate Consulting Business Solutions AB.They have their leading expertise in Oracle E-Business Suite and has previously chosen to implement Oracle EBS R12. The modules that are planned to be implemented are general ledger (GL), accounts payable (AP), accounts receivable (AR), project module (PA), purchases, and CRM. For a consulting company like Navigate, it is particularly important to have a simple and effective time reporting process. We were therefore asked to provide new tabs with a decision-making process to determine if Oracle Time & Labor (OTL) is a useful time tracking system for their business.In order to achieve the company´s aim and objective we decided to follow a development method with five different phases.

The aim of this study has been to take part of six ex-alcohol addicts? narratives about their lives with starting-point in which factors that has been significant and/or determining to be able to leave a life in abuse and what change this process has implied for their identity. To achieve the purpose with this study has three questions been formulated. These are what in the person?s life have been important in the process of a life free from alcohol, what were specific and decisive that effected the decision to stop using alcohol and what is the attitude to them self and their new role as an ex-alcohol addict. Alcohol is a drug that is legal and accepted in the society and it´s hard to discover an addiction.

This project is the result of a cooperation between HalmstadUniversity and EABAB. The aim of the project was to create a macro that would help EABAB automate the process of designing steel trusses. When run in Microsoft Excel, the macro imports and processes coordinates from a calculator program. The data is then imported into the Building Information Modelling software Tekla Structures, which creates a 3D structural model of the steel truss.The macro saves much time in the project planning process and also helps minimize the risk of design flaws caused by human error. .

Millions of preselected progeny have been born since the development of The Beltsville Sperm Sexing Technology 1986. The method is based on flow cytometry and sorting is done on the basis of DNA difference of the X- and Y-chromosomes. Preselection of progeny provides an opportunity to obtain genetic gain and increased production as well as increased animal welfare and decreased environmental impact. However, the method is associated with low fertility, high costs and uncertainty whether the sorting process contributes to DNA damage and thereby results in genetically impaired progeny. Today, sex sorted sperm is only commercially available in the bovine industry, due to the fact that bull sperm is more suitable for selection than sperm from other species.

Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

Uvån Hagfors Teknologi AB (UHT) has developed a process ? GRANSHOT® ? for quicksolidification of metals in water baths. In the process liquid metal is splintered ? granulated ?into small drops. The drops are rapidly cooled in a water bath where all the heat energy from theliquid metal is transferred into the water.

Companies need to receive feedback in order to understand how they should adjust to shifting demands in the market. This study focuses on the Mystery Shopping process and the information it provides. Through qualitative interviews information was gathered which identifies Mystery Shopping as an approach where companies actively seek information withthe help of anonymous ?shoppers?. This method is compared to other research methods in order to identify the characteristics of Mystery Shopping.

This study examines the possibilities of interpreting the moral values and ethics presented in the current curriculums in a way that makes them inclusive and constructive. The study also reveals how the liberal democratic ideal, presented in the curriculums as a hyper-ideology, is not at all easy to define or live up to in the pluralistic school of today.By close-reading and criticizing the curriculum for the Swedish senior high school (Gy11)and by looking at it from two different points of views, as rules or norms and as a process, Ishow how the curriculum can be interpreted as a basis or starting point for a communicationabout values. I also discuss wether the aim of this communication should be consensus or anongoing process..

Public opinion has increasingly become a political force in the European integration process. At present, it appears that the people?s attitude towards the European integration is relatively skeptical. How can we expect that the attitude towards European integration will evolve in the future? This paper tests the extent to which diffusion theory can serve as a model to explain the development of attitudes to European integration policy in Sweden from 1999 until 2009.

The aim of this essay is to study the decision making process and implementation of the principle of political participation and influence for Roma minority in Sweden. The results regarding the decision making process is structured through a discourse influenced policy analyses. Problem picture and recommended measures in the political documents representing the decision making process are analysed through theories of minority rights and equality. The implementation is seen through, by the author given minority discourse and the work in the roma council and analysed by the same theories already mentioned.The results show that regarding the decision process the aim of art.15 in the framework convention is based on the idea of equality while the Swedish documents relates more to an idea of the right to speak for the group. Regarding recommended measures, the framework convention gives several recommendations on specific measures for political participation while the Swedish documents focuses on the general politics of the state.

Sales is the foundation for all commercial business and companies that have the best sales process in conjunction with efficient deliveries will do well in the long run. The author of this report was tasked by the Organisation in South Africa to study new/alternative ways of attracting Swedish companies to South Africa and sell the services of the Organisation to these same companies (defined as the sales process in this report) by analysing how similar international service companies do the same. A benchmarking process has been conducted with four similar service organizations in South Africa to examine how these companies work in comparison to the Organization. Surveys have been used for purposes of this study, as the methodology is well suited to provide the author a view on the opinions, perceptions and experiences of the respondents.The project aimed to develop new methods to attract Swedish companies to South Africa or improve and streamline the existing methods. The aim was also to develop new ways to sell the organization's services to Swedish companies.The study concludes that there is little focus on marketing of services within the Organisation.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Background: The request for the Reggio Emilia practice has expanded enormously the last couple of years within the Swedish preschools. This particular practice describes the environment as a third educator. This third educator is supposed to work as - not only a tool - but also a support to ease children's learning experiences and help develop their mind. Previous research has shown that design of, for instance, furniture has a way of affecting the children's learning process and development.Aims: The purpose of this study is to see how two different teams of preschool educators on two differed Reggio Emilia inspired preschools work and handle the physical indoor environment. Method: We started out by contacting Reggio Emilia inspired preschools.