This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.

This report describes the working process and creation of a new website for Lindt & Sprüngli Sweden with the help of the content management systems Magento and TYPO3. The report shows how different elements are created and published on the website, how the education in these systems was acquired and how contact with third party companies has been initiated and maintained. It also accounts for what is shown on the website as well as why it is shown. The goal with this project is to deliver a complete website to Lindt & Sprüngli Sweden where customers can find information about products as well as the company. The results of this project was a website that was launched on www.lindt.se on the 17th of June 2015..

Introduction: How to implement and integrate cultural aspects in strategy making and planning in order for cities and regions to reap both social and economic benefits has been widely discussed in recent years. This method of working with culture, both as an economic, as well as an identity strengthening tool has come to be labeled as cultural planning. But in order for these ideas about cultural projects and institutions to become a reality, something has to be done. This is where the entrepreneur enters.The Glass Factory, a newly opened cultural establishment in the heart of the Glass Kingdom in Småland, Sweden, became the subject of empirical investigation for this paper. As this originally was an initiative from Emmaboda municipality the planning and start-up procedure could be viewed as a cultural planning process.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

Each student in elementary school will under current policy documents have an individual development plan (IEP) from 1 January 2006. The plan should primarily aim for a higher goal achievement, but also to the student to gain a greater understanding of their own learning process and knowledge. My experience is that some students, despite efforts IUP have difficulty seeing their own learning process and it has been the starting point of my study. The aim of the study has been to investigate and analyze teachers work with individual development plans from the first grade to the sixth grade from a teacher's perspective. The goal was to identify strategies and techniques that could help develop IUP as a tool for the student's learning and understanding of their own learning process.

AbstractBackground: The company that this report addresses is, at time for investigation, in the midst ofa change in organizational culture, where two departments with different core competencies arebrought together into one. The purpose of this study is to review the potential problems that mayoccur in the change process when one or more subcultures come into conflict with organizationalgoals.Purpose and methodology: The reason for performing this study and the objectives are toexamine how subcultures influence and respond to organizational changes. The survey isconducted with a bottom-up approach in which participation in daily activities with thesubgroups is the foundation. The management's perspective has been omitted in consideration ofpast literature in the field where focus most often has been on their thoughts and views on theprocess of organizational change. The method used is participant observation and interviews.Results and Conclusion: Subcultures exist and they do affect an organizational change.

The purpose of the study was from the perspective of young people that has completed a stay at HVB-home. The respondents are between 15-21 years both boys and girls. The basic questions were: How do the respondents look upon this HVB-homes service process? How do the respondents look upon this HVB-homes service contents? How do the respondents look upon this HVB-homes service regarding available information and how the staff is available? What positive and negative experience do they have from their stay at the HVB-home? We also wish to get a picture of what is important to change to improve the quality on this HVB-home. To receive answers to those questions we formed a questionnaire.

The purpose of the study was from the perspective of young people that has completed a stay at HVB-home. The respondents are between 15-21 years both boys and girls. The basic questions were: How do the respondents look upon this HVB-homes service process? How do the respondents look upon this HVB-homes service contents? How do the respondents look upon this HVB-homes service regarding available information and how the staff is available? What positive and negative experience do they have from their stay at the HVB-home? We also wish to get a picture of what is important to change to improve the quality on this HVB-home. To receive answers to those questions we formed a questionnaire.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

The purpose of the study was from the perspective of young people that has completed a stay at HVB-home. The respondents are between 15-21 years both boys and girls. The basic questions were: How do the respondents look upon this HVB-homes service process? How do the respondents look upon this HVB-homes service contents? How do the respondents look upon this HVB-homes service regarding available information and how the staff is available? What positive and negative experience do they have from their stay at the HVB-home? We also wish to get a picture of what is important to change to improve the quality on this HVB-home. To receive answers to those questions we formed a questionnaire.

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

This dissertation is carried out on behalf of Two i Sverige AB. Two is a consulting agency which primarily works with the development of homepages. The company has several of its complete applications written in ASP e.g. the development of homepages. At the agency they have seen benefit migrating these applications from ASP to the more flexible environment ASP.NET.

By studying literature concerning design, didactics and reflection, and complementing those explorations with interviews with experienced design educators, this thesis challenges the idea of aesthetic media education being purely aesthetic in its characteristics. Drawing from their own experiences as a media aesthetics educator and an industrial designer, the two authors argue that the work flow used within most fields of design, commonly known as the design process, might provide a suitable didactic alternative to a field of education lacking relevant methodology. The literature study offers a better understanding of the design process and how it may be defined and viewed within an educational context. The interviews provide a more practical insight into the world of design education. The result shows that the design process as a didactical method theoretically offers both elements of critical thinking as well as direction and frames for students lacking aesthetic and artistic experience.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

Syftet med den här studien är att förbättra informationsflödet från projektering och produktion in i förvaltningen. Detta för att väcka ett intresse hos förvaltare och för att visa att det finns pengar att spara genom att ta hand om informationen från projekteringen och produktionen.Tidigare studier inom området BIM visar att stor fokus läggs på projektering och produktion men det är ett väldigt litet fokus på förvaltningen när man talar om BIM.Målet är att konkret kunna visa vad informationen är värd och att visa vilken information förvaltare använder och var den finns i byggprocessens skeden före förvaltningen.Rapporten bygger på en litteraturstudie, intervjuer och beräkningar. Förvaltare har blivit tillfrågade vilken information de använder i förvaltningen och sedan har projektör och entreprenör blivit tillfrågad ifall denna information finns att tillgå i projekteringen och produktionen. Värderingen av informationen har sedan gått till på två sätt. Det ena sättet är att bedöma kostnaden av att uppdatera information mot kostnaden att ta fram information på nytt.