This thesis examines the conditions for participation in the decision making process of a possible mine establishment in Storuman municipality in the north of Sweden. This is done through a case study where the main actors are the mining company Nickel Mountain AB, the municipality Storuman and the Sami village Vapsten. As a theoretical framework Cecilia Eriksson?s division of democratic theories is used as a starting point. Methods as described in deliberative democratic theory, such as discussion by effected community members, are seen as a method within the participatory democratic tradition, not a theory of its own.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Varför en rädsla för alternativmedicin? En studie om hur EU?s kosttillskottsdirektiv har implementerats i Sverige.Author: Annica BlomstrandSupervisor: Anne Haglund-MorrisseyThe aim of this study is to investigate the process of legislation and implementation of the directive of the European Union on the food supplements, focused on member state of Sweden.There are two questions in this study: What was the process of legislation in the period when the Directive on the food supplements became established? and How does the implementation of EU?s decision on the food supplements works in reality? In order to answer these questions, two different methods were used. One was qualitative analysis of the available text and the other one case-study (qualitative including interviews)The conclusion is that the implementation has not been successful. The process of legislation has followed its traditional way, which in its turn did not leave so much space to the thorough implementation of the Directive. Unfortunately, this is a process that overlooks citizens and countries with different premises, affected by the decision.Keywords: EU, kostillskottdirektivet, lagstiftningsprocessen, implementering, organisationsteori, fallstudie.

Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

The importance of good information security and safety grows larger and larger for each day in the information society of today. This concerns citizens, companies and public authorities. At the Swedish Transport Administration, the operation of an information security and safety process has evolved over the years to guarantee that the public authority can be trusted by its citizens, cooperating companies and other public authorities. This responsibility has been assigned to the Information Security and Safety Department (Informationssa?kerhetsavdelningen, ITsa?).In this thesis the aim is to review to what extent ITsa? achieves any business benefits for the Swedish Transport Administration, and to analyze, streamline and come up with solutions to improve their workflow.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.

Syftet med denna uppsats är att utreda vilka faktorer som påverkar de svenska småhuspriserna, och i så fall hur och i vilken utsträckning. Med stöd av tidigare studier som enhetlig pekar ut bolåneräntan och disponibel inkomst som de faktorer vilka har tydligast inverkan på fastighetspriserna i Sverige, utökas de förklarande variablerna i denna studie med hjälp av en stock-flow modell. Tidsseriedata från 1993-2013 behandlas för enhetsrötter och kointegration för att skattas i en regressionsanalys i form en "Error Correction Model", med avsikten att utreda både ett kort- och långsiktigt samband. Resultatet bekräftar reporäntan och disponibel inkomst som två viktiga faktorer för att förklara det långsiktiga sambandet med priserna på småhus i Sverige, tillsammans med ytterligare faktorer såsom BNP, hushållens skuldsättning och arbetslösheten. På kort sikt är dels den historiska utvecklingen av huspriserna en nyckelfaktor, men faktorer som disponibel inkomst, ränta, BNP och hushållens skuldsättning är också viktiga krafter för att förklara småhuspriserna.

The area of Lycksabäcken northwest of Lycksele is a national interest of natural conservationbecause of its geological values with many unique landforms. Many of these landforms indicatethat the deglaciation process in the area was very complex. However, the deglaciation process inthe area has not previously been fully understood. The aim is to add to the knowledge of theevents that took place during the last deglaciation. To do this, the glaciofluvial landforms in thearea were mapped by studying aerial photographs with a Wild Aviopreter and a five-day fieldinventory of key areas for the interpretation.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

Syftet med studien var att ta reda på hur gymnasieungdomar upplever utomhuspedagogiska moment i undervisningen. Det är en kvalitativ undersökning gjord vid Bernadottegymnasiet i Stockholm. Studien baseras på deltagande observationer under drygt två fältdygn och på semi-strukturerade intervjufrågor med tolv elever, i tre fokusgrupper. Resultatet visar att elever upplever utomhuspedagogiska undervisningsmoment positivt.

A well, situated on Listerlandet in the western part of Blekinge in Sweden, has a very high content of nitrate. Water with a too high content of nitrate is hazardous to human health, in particular to small children. The area surrounding the well is mostly drained agricultural land with some larger farms for chicken and mink. The well takes its water from the bedrock and is deeper than most other wells affected by nitrate. The bedrock in the area is dominated by limestone with a relatively high flow of water.This thesis was performed in order to find the source of the nitrate.

The last few years a lot of media air time has been devoted to training, sports, health and weightloss on a more personal level then before. The new media arena is beeing used at its´ maximumto broadcast wievs on how we should eat, look, exercise and live. This thesis is trying to makebetter understanding on what people in general think is important when it comes to physicaltraining and motivation with the aid of digital media and IT systems. The thesis describes aworkshop that was conducted within the frames of Participatory Design and the outcome of thatworkshop. The workshop was conducted with a group of lead users (in this case instructors at avery large fitness center in Umeå, Sweden) and the main question was ?How can IT be used toachive a positive effect on physical exercise if motivation is the focus??.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

Studien undersöker känslomässiga reaktioner vid kooperativt spelande, vilka som är gemensamma för båda spelarna och hur de påverkas av hur svårt spelet är. Arbetet utgick från studier av spelares emotionella reaktioner på spel och teorierna om Flow. Spelet Sanctum användes i en serie tester där mätningar utfördes på två spelare med hjälp av rapportformulär, pulsmätare och hjärna-till-datorgränssnittet Emotiv EPOC. Studien fann att spelarna ibland upplevde samma känslor när de spelade tillsammans och att den ökade svårighetsgradens huvudsakliga effekt var att förändringarna i känslorna blev skarpare och större. Det tycktes huvudsakligen vara motgångar som splittrade spelarnas upplevelser.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.