Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,value stream mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.

Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.

Throughout the years more and more charitable organisations have appeared and the competition between them has increased. This has forced the charities to use more marketing strategies in their work in order to strengthen their competitiveness. Research in philanthropy in terms of economy and marketing has been neglected in Sweden and the research that is done today is mainly focused on why individuals donate to charity. A donation, according to the writers of this thesis, has been seen as an economical activity and can therefore be explained and understood through economical models and theories. This thesis aims to see how a contributor to charity makes the decision to donate money, consequently see how the donation decision process actually works from a theoretical model of a buying decision process from marketing literature. The purpose of this thesis is therefore to from a buying decision process concerning products describe the donation decision process for contributors to charity. By achieving this purpose the writers aim to compare if a donation decision process go through certain steps similar to a buying decision process.

Concrete is one of the world?s most common construction materials and is composed of 70-80 % stone material. Today crushed stone is used as aggregate in concrete in order to replace natural aggregates due to strong environmental reasons. Stone crushing yields flaky material and in this thesis studies are made on the flaky particle shape and how it influence properties of concrete such as workability, rheology and strength. The concrete recipes used in this thesis have fixed values, the only variable is the flakiness of the crushed stone.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

The aim of this Master's thesis is to study how generational identities are conveyed in the reception of two debut novels, Jack by Ulf Lundell and Allt by Martina Lowden. Both novels have been considered literary and social expressions of their generations. The empirical material consists of 14 reviews in Swedish daily press from the time of publication of Jack and Allt, respectively. The thesis revolves around the following questions: How is the generational identity defined in terms of lifestyle practices, milieus and other social circumstances? To what extent are structured factors such as gender and class considered? How are the critics considering the reflexive project of the self? I base the theoretical framework on Anthony Giddens' theories about identity creation in the late modern society.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

This essay is based on seven lifestoryinterviews with people who are undergoing orhave undergone a long asylum process. Four women and three men have contributedwith their stories about their experiences of waiting for a determination of theirapplication for residence permit. The main aim of the essay is to give betterunderstanding of how to be a refugee and a long asylum process affects people's abilityto narrate and thus examine their opportunities to be active in the construction of theirown identity.The questions that are debated and discussed are:? What can it mean for an individual's identity to escape her country and for a longtime wait for decision of asylum?? What stories can be told?? What reality are highlighted as central in the stories?? How do they handle their situation and give meaning to their lives?The analysis is based on two main theoretical perspectives: narrative theory and identitytheory. The approach is that people create meaning of events through storytelling andthat they through this process of narrating construct (and reconstruct) their identities -the self image as one have and wants to present to others.In the analysis three different types of stories are distinguished, stories that arerepresented in the empirical material: the story that can not be told, the story that mustbe told and the story that are gladly told.

Purpose/Aim: To create a communication strategy for PADI Nordic with the intention of getting Swedish divers, who have been certified abroad, to Swedish dive centers.Material/Method: The study is based on a number of personal interviews conducted with a) divers who are active in Sweden, b) divers who are not active in Sweden and c) representatives from PADI and PADI affiliated dive centers.Main results: The main reason that people who have been certified abroad do not dive in Sweden is that they regard it as being too complicated, too cold, too expensive and with nothing interesting to see. These might partly be misconceptions that can be corrected through a communication strategic effort. The best way to change this perception is by two different forms of communication. One will go from PADI Nordic straight to the divers through an email. This will have the purpose of getting their attention, making diving sound interesting and raise their awareness in preparation for the other part of the process.