This study examines the use of building modeling and energy simulations in the design process  of  a  building.  The  take-off  point  is  the  notion  of  energy  simulations  being needed early and throughout the building design process, and that the lack of energy simulations may be explained by the fact that they are time consuming and therefore often too expensive. A greater interoperability between software tools used by relevant disciplines,  such  as  the  architect  and  the  energy  specialist,  would  create  smoother workflows, which would reduce this cost and open up for more frequent and iterative energy  simulation  processes.  The  study  is  an  assessment  of  the  modeling  tool  Revit and  the  simulation  tool  Virtual  Environment  and  whether  they  can  create  smoother workflows, and make leeway for a more frequent use of energy simulations throughout the  design  process.  It  also  investigates  the  limitations  of  what  can  be  examined  by simulations in Virtual Environment. This will hopefully help clarify the future role of energy  simulations  in  design  processes.  The  method  is  a  trial  by  error  approach  of testing the two software tools by building and simulating a model. The results of these tests  show  that  the  workflow  is  not  optimal  (and  therefore  time  consuming)  for frequent  and  iterative simulations  throughout the  design  process,  but  it  also  reveals some  great  possibilities  of  what  can  be  performed  with  these  two  powerful  tools  at hand.  Further  development  with  regards  on  platform  independency  of  the  building information  model,  including  seamless  exporting  and  importing,  seems  necessary  to strengthen the future role of energy simulations..

Alstom Power Sweden AB in Norrköping isexpanding their business in the presentsituation and has implemented aprocedure for reverse engineering as apart of this work. Reverse engineeringat Alstom is an extensive procedurethat is calculated to be performedunder very time demanding conditions.This thesis is a continued exertion ofthe implementation process in order toidentify and describe the mostimportant process steps in purpose to beable to manage and improve theprocess.This thesis was written with twoprimary objectives. The first was todescribe and map out the procedure torecreate technical data of a turbineblade, based on a validation of thereverse engineering process that hasbeen performed at Alstom in Norrköping.The second purpose was to describe thekey factors to achieve successful usageof reverse engineering that have beennoticed in the literature study.The work is based on a literature studyon the subject reverse engineeringwhich produced the theoreticalknowledge of the method to reproducetechnical data to a product. Theliterature study has also led to adescription of reverse engineering froma legal perspective to clarify how farit is allowed to apply the methodaccording to the patent laws. With theliterature study as support and furtherhelp and guidance from individualswithin the reverse engineering unit atAlstom, a complete picture andunderstanding of the process has beenproduced and documented..

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

This thesis aims to investigate the positioning concept of industrial services. We chose to identify the reasons why positioning is used as well as to describe the positioning process. The research strategy chosen for this thesis was a case study of a consultancy firm Benima AB. This firm was chosen due to the fact that a new positioning concept during the latest year hade been implemented and therefore seemed like a good choice for our study. Of the six available theoretical reasons for positioning, we found that Benima AB had two of them: namely change in target market or their needs and demands and renewed company identity/personality.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Studiens syfte är att ta del av hur förskollärare beskriver vad som kännetecknar pedagogisk dokumentation samt hur de arbetar med den i verksamheten. Vi vill även belysa vilka möjligheter och begränsningar som förskollärarna ser i sitt arbete med arbetsverktyget. Intresset för ämnet har skapats under utbildningen och VFU (verksamhetsförlagd utbildning) då pedagogisk dokumentation förefaller vara ett arbetsverktyg som blir allt vanligare i förskolan. Det är en kvalitativ studie där semistrukturerade intervjuer har valts för att samla in det empiriska materialet. Studien baseras på fyra intervjuer med förskollärare som alla har läst eller läser kursen Pedagogisk dokumentation med IT-stöd på högskolan i Skövde.

Human Computer Interaction (HCI) is a broad discipline that studies different concerns regarding interactive systems? development. One of the major interest points within the discipline is the reasoning behind building specific functionality into computers and the long-term effects that usage of systems will have on humans.Within Human Computer Interaction there are theories and frameworks how to involve a user in the process of developing new systems. In this paper focus is applied to the development process within developing applications for Enterprice Digital Assistants (EDA) and to what extent the end-users are involved in the process. Fazer Bageri AB has been choosen to represent a business corporation that uses handheld computers in their everyday tasks.The method used to gather information for this study has been by performing interviews and observations with key stakeholders at Fazer Bageri AB and MobiOne AB.

This is a qualitative study which purpose is to examine the experiences of the recovery process after a treatment for eating disorders.                                                         The questions we have decided to examine are; how did the women adapt to a healthier life after treatment, what are the women's perceived experiences of the aspects related to identity and identity work, and what external social influence was seen as important for their adjustment process to a healthier life?Methods: We have used computer-supported and semi-structured interviews. There were a total of nine women who took part in the study.                                                                                                                    Results: Majority of these women have been recovered from their eating disorders, but some still have major or minor problems. They found it rather difficult to adjust their life's without an eating disorder.Conclusions: Increased self-awarness led to greater control over the eating disorder. The women could begin to confer the new features that they identified with.

Aim: The aim of this study was to examine health professionals´ experiences of giving advice regarding sleep to parents of infants and to perform and evaluate an intervention in the form of introducing information about the sleep of infants.Method: The study was designed as an intervention study with a qualitative approach where data was collected from two focus groups in the form of interviews. The intervention consisted of the information material Sugen på sömn. There were five participants whom three of them participated in the second interview. The interviews were processed by content analysis.Results: Health professionals´ experience of giving advice on sleep was summarized in three themes. The experiences of giving advice in interaction with parents, health professional themselves experienced the power to influence the parents with the advice they gave, while the parents' previous experience and knowledge impacted on how the advice came into practice.

Aim: The aim of this study was to examine health professionals´ experiences of giving advice regarding sleep to parents of infants and to perform and evaluate an intervention in the form of introducing information about the sleep of infants.Method: The study was designed as an intervention study with a qualitative approach where data was collected from two focus groups in the form of interviews. The intervention consisted of the information material Sugen på sömn. There were five participants whom three of them participated in the second interview. The interviews were processed by content analysis.Results: Health professionals´ experience of giving advice on sleep was summarized in three themes. The experiences of giving advice in interaction with parents, health professional themselves experienced the power to influence the parents with the advice they gave, while the parents' previous experience and knowledge impacted on how the advice came into practice.

Norrland - en vacker, harmonisk plats med öppna vyer, fjälltoppar, ljusa sommarnätter, industrier och metertjock snö. Men hur kan man visa upp detta på ett nytt sätt? Syftet med vår konstbok är att visa upp Norrland på ett sätt som inte tidigare gjorts i hopp om att inspirera andra att se möjligheterna och skönheten i en del av Sverige som ofta är underskattad. Vi kommer under följande sidor guida er igenom en långdragen process, från start till mål, vid skapande av något nytt. En process fylld av samarbete, inspiration, fotograferande, illustrerande, poesi och glädje.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Problem. Sponsorship has increased continuously during the 21st century, however, at the same time the public interest of traditional promotion has been diminishing. The meaning of sponsorship is a very diffuse and therefore the concept needs to be investigated. Due to the multitude of sponsorship and its impreciseness about its financial value, it is difficult to evaluate sponsorship for companies, especially when there is a difficulty in choosing a decent method for evaluation.Purpose. The purpose of this thesis is to investigate the concept of sponsorship, motives for sponsorship and evaluation of sponsorship according to the theory and give empirical examples of how these areas are being managed by companies.Method.