Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

The purpose of this thesis is to shed light on how evidence-based librarian and information practice (EBLIP) is understood and practised at some Swedish hospital libraries, and also to analyze how EBLIP functions as a strategy to bridge the gap between research and practice as described by Haddow & Klobas. The theoretical framework for the study is partly based on Haddow & Klobas description of the gap between research and practice in the field of LIS and partly a description of the EBP-process which plays a key role in the use of EBLIP. Interviews have been done with four people, three librarians, all with management experience, and an academic development officer, active at three different hospital libraries where EBLIP is practiced. All informants believed that it is important to make use of research results in order to improve services and practice. In their efforts to apply the research findings the informants face a number of hindrances, which indicates a gap between research and practice.

This Master's thesis aims to investigate the reference interview using the discourse analytical method discourse psychology. The reference interview has been studied thoroughly, and its importance has been proven repeatedly within the field of Library and Information Science (LIS). However, it has never been studied from a discourse analytical point of view before.The material for our study was gathered at Malmö public library, and consists of 10 tape-recorded and then transcribed reference interviews. Our study shows that there are several discourses within the reference situation. The dominating discourse, the reference interview discourse, is found within all the reference interviews.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Purpose: This paper aims to describe the socialization process that audit associates experience within an auditing firm that is included in the Big 4-sphere. Our purpose is also to describe which attributes that characterize the organizational identity, and how these attributes are reflected in the self-image of the associates. Furthermore, we seek to explain how the socialization process has influenced the organizational identification. This subject is of interest since the business of auditing is facing higher demands from regulators and politicians, due to the bankruptcy of HQ-bank among others during the financial crisis in the beginning of the 21st century. Earlier research claims that the socialization process of recruits, especially in the initial state of the employment, has a major impact on their future values and attitudes in their job performance.

SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.

This paper investigates a number of components that influence the relationship between consultant and client in a procurement process of ERP. The paper deals with Trust, Commitment, Cooperation and Satisfaction. The problem lies within the fact that consultants do not know how and to what extent the components affect relationship quality. Based on the theories in the areas of procurement, relationship marketing and relationship quality, information has been gathered about how the various authors believe a procurement process works, how they view relationship marketing and how relationship quality is created. The components discussed are trust, commitment, cooperation and satisfaction.

This thesis work has been performed at the Division of Assembly Technology at Linköping University for a period of ten weeks. The work is part of the project ProFlexA, which is a research project in collaboration between Linköping University, Lund University, and industrial partners such as Combi Wear Parts and Smålands Stålgjuteri AB.The casting process creates random incurred burrs and defects, which must be removed during a cleaning process to make sure that the cast can be sold. Automation has long been sought for the cleaning of castings due to, among other things, poor working conditions for staff, but this has proved difficult to implement with today's technology. Automation has for some time been available for more capital strong companies with large annual volumes, but for smaller companies with small-and medium-sized volumes, automation has not been an option.The goal of ProFlexA is to develop an automated cleaning cell aimed at small-and medium-sized volumes.The goal of the thesis is to do a pre study at ProFlexA?s partners on cleaning of castings, and develop concepts for automated cleaning of castings.By recording the process and cycle times, the cleaning of castings has been documented as it works today, and on this basis, information and statistics has been compiled.

This report describes the process of translating Russian financial information in accordance with Russian Accounting Standards to IFRS, International Financial Reporting Standards. The author describes the two regulatory frameworks and reveals a number of risk factors in the process. These risk factors may affect the reliability of figures from Russian companies. The conclusion states some recommendations on how these risk factors can be managed..

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.

With this essay we want to describe the transformation process that the real estate owner has to go through to sell the current rented flats to tenant. We also want to provide an understanding how the valuation is performed in the transformation process and highlight the issues that affects the price in the valuations. In the essay we would like to see if the valuation and the transformation process differ in a public real estate company compared to a private real estate company. Based on this we have asked us the following question to answer: -Is there any differences in how real estate?s are valued in the transformation process between public real estate companies and private real estate companies? We have used a qualitative approach to keep our main question.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.

Purpose: This study`s purpose is to investigate the role of a business incubator in the strategic decision situations during the process of a new venture startup. It also aims to explore the methods and instruments the incubator and its advisers applies during the process.Methodology: This study is built on the basis of a hermeneutic approach with qualitative method and abductive design. The empirical material collected consist of interviews from two case studies and secondary data collection from different related sources.Theoretical perspective: The theory in the study consists of the elements of previous research on innovation processes and entrepreneurship. To analyze the data, models and theories related to decision making, incubation, process theories and organizational theories.Empirical foundation: The empirical material consists of interviews and data from two completed case studies. Additionally consist a relatively large part of the empirical data out of a comprehensive information retrieval from various secondary sources such as internet, newsletters and annual reports.Conclusion: The assay was able to detect not just one, but a variety of roles that the incubator occupies at different stages of the innovation process.

Background: According to us, obtaining reimbursement of expenses in connection with a representation is a ?forgotten? process, and we therefore find it interesting to look further into. In some cases we have not claimed for compensation since we consider the process as too complicated or that we lost the original receipt. Ernst & Young (2009) say in their research that within the financial management area, Swedish operations loses billions of Swedish crowns due to bad routines. Okada and Hoch (2004) mention that if time were not considered as a resource, time would not be a hinder.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.