In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

Energy Director is a control and measuring system for energy consumption and is part of the product portfolio of E.ON AG for more efficient use of energy, offered to business customers. As of today, the system has only one parameter of control, namely power, and the objective of this essay has been to investigate whether other ones could be added. The emphasis is on the environmental perspective, which is why carbon dioxide has served as an example for this parameter in question.Parallel with the study of Energy Director electricity on the margin, calculations of carbon dioxide equivalents and also the Swedish trade of electricity have all been highlighted. Results indicate that when reductions in energy are made it is endorsed to omit from electricity on the margin rather than some mean distributed electricity, under certain conditions, and in addition the calculations of the reductions should be modified regarding the efficiency of the power stations fuelled by lignite and bituminous coal. Sweden practices trade with the Nordic countries as well as Poland and Germany.

Purpose: To investigate whether or not the credit granters believe the quality in audits will deteriorate after the abolishment of statutory audit and, if that is the case, how the abolishment will strike the purpose and goal of accounting.Approach: To answer our purpose we carried out a literature study to later implement interviews with four granters of credits specialised in business accounts.Findings: The process of credit granting will not change after the abolishment of statutory audit for companies still using audit reports. Though, for other companies the process will change dramatically since the lean time of the process will increase. Higher demands will be put on these companies since the reliability in the economic information will decrease when it is no longer being reviewed in the same sense. Though, the credit granters believe that some form of substitute for audit will be demanded in order for the companies to be granted credits from the bank..

The subject of this bachelor thesis is discrimination and unfair treatment in the employment process where employers discriminate against job applicants. The purpose of this study and research questions is to investigate and clarify the legal protection available against discrimination and unfair treatment of pregnant women and persons on parental leave during the employment process and how this protection differs between men and women. This thesis highlights the Swedish law and EU law regarding discrimination and unfair treatment of individuals. The concept of discrimination and its requisites will be accounted for and exemplified by case law. This statement will be analyzed along with the relevant case law of the EU-court and the Labor-court.

Background: Many different parties in the society are affected by the financial information delivered by the companies. Therefore, different interests want their ideas to have an impact on the accountning standards. The construction of the accounting standards are illustrated as a pure political process, where lobbying and conflicts of interest are determining factors. Purpose: The purpose is to understand the underlying interests behind regulation of financial accounting in Sweden and how these interests are manifestated in the establishment of accounting standards. Method: The thesis is designed as a casestudy of the regulation process which induced the legislation of the Årsredovisningslagen 6 kap 1 § 3st.

The Intellectual Capital Statement facilitates the mapping of interdependent and simultaneously impacting intellectual capital factors in a unique way. The process-orientation of the German approach differentiates it from its predecessors and gives an advantage over alternative procedures. By combining these aspects with the possibility to communicate the company?s efforts and progress in the field of intellectual capital, the German Intellectual Capital Statement (Wissensbilanz) provides an effective management tool..

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

The coproduct, dried distillers grains + solubles (DDGS) from ethanol production based on wheat contains much rumen degradable protein and fiber with low digestibility. To compliment this quality in an effective way a grass silage low in protein and much digestible fiber is needed. The aim of the study was to investigate the effects of adjusting the crude-protein concentration and fiber quality of the silage when feeding DDGS and of varying the inclusion level of DDGS, when feeding the adjusted grass silage, on intake, milk yield and composition, faecal traits and feed efficiency. Four different total mixed rations were compared. The normal grass-clover silage had a crude protein content of 17,8 % and an NDF content of 46,2 % of dry matter. The adapted grass silage had a crude protein content of 14,6 % and an NDF content of 52,9 % of dry matter. The diets were formulated to have similar nutritional content except for A + 4 which had a higher content of rumen degradable crude protein and a lower concentration of NDF.

It seems like Swedish municipalities are dominated by beliefs that all citizen participation is good for the development of local democracy. A critic of this certainty is rising among Swedish scholars of political science. However, a critic with an ambition of such generalization is harsh. Different democratic projects contents different qualities and thereby diverse problems in the democratic process. If these democratic problems within the process can be recognized, a deeper understanding can be found and in the prolongation a strengthening of the democracy.This essay examines the democratic process of Lomma municipality's democratic project of citizen participation.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

AbstractDoes Geography Matter? A Study of the Bologna Process from a Policy Transfer Perspective.Essay in Political Science (D-level) at Karlstad?s University by Beatrice Högå, Spring 2007Tutor: Susan MartonThe purpose of this essay is to generally see how theories of policy transfer can help us to better understand the process through which the Bologna Process is being spread throughout Europe, and to specially see if geographic placement, i.e. in the heart of Europe, plays a role in how well and how fast the Bologna Process is implemented.To be able to answer the purpose, I have used Evans and Davies theoretical model on policy transfer network to describe the Bologna Process. Furthermore, Sweden and France are the countries being examined when they differ on the independent variable. From there, I have applied an analytical tool, namely process tracing, to examine whether there are differences in the two countries? work with the implementation of the Bologna Process.I have designed six specific research questions:Have France performed more extensive work than Sweden when it comes to implement the two-cycle system?Have France performed this work earlier?Have France performed more extensive work than Sweden when it comes to recognize awards and periods of study?Have France performed this work earlier?Have France performed more extensive work than Sweden when it comes to quality assurance?Have France performed this work earlier?After applying the analytical tool to be able to answers these research questions, the answer to the general question Does geographic placement, i.e.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

In which ways have composing processes in music appeared over the past 300 years? How may composing processes work today? What does new technology do to this processes?The key purpose of this study is to investigate various composing processes. A further purpose is also to gain an awareness of how we use modern technology by computers and their notation programmes.The research design of this thesis includes a display of literature related to composing processes. along with an analysis of the writer?s own experiences in the area.

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.