This master thesis has been carried out at Scania R&D at the department for Powertrain Control System Development during the winter of 2010/2011. In the thesis the writer examine and evaluate the existing method for collecting information from the tests carried out during the development of the Powertrain Control Systems software. It also contains suggestions for how a new method that enhance the validation elements could look like.The master thesis uses Vicentes theories of the ecological approach and theories of how knowledge sharing of tacit and technical information works within an organization and between the organization and its customers. First a workplace analysis at Scania R&D is carried out to see how Powertrain Control Systems work and how they test their software. Second a control task analysis, where the aims decided on after the interviews, is compared to the existing method.

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

I denna studie undersöktes om känsligheten för stress varierar mellan olika ångestsyndrom. Respondenterna utgjordes av 36 män och 47 kvinnor, samtliga medlemmar i Svenska ångestsyndromsällskapet, som fick besvara 15 bakgrundsfrågor samt PANAS, SE-formuläret och Locus of Control. Några skillnader i stresskänslighet kunde inte påvisas. Dock uppvisade kvinnor högre grad av extern Locus of Control än män, medan män hade fler sömnproblem än kvinnor. Bortfallet i undersökningen är betydande eftersom del av respondentgruppen föll bort.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

This report describes the construction and development of a control box, which is a tool for testing and verifying a certain model of Rapid?s built in staplers (model A6102). Basically the function of the control box is to interpret any errors that may occur in the stapler and to make it possible to test fire the stapler.The control box should be able to communicate with the stapler using a specialized communication protocol. The different data such as errors, firmware etc. from the stapler is presented in plain language on a display.

This thesis examine if social voluntary organisations are independent or if they are being regulated by the public sector. We ask how free the organisations are since they get so much support and funding from the municipality. This is examined by looking at the homogenisation pressure, which means that organisations are being exposed by a pressure to become more similar. The control that the municipality has over the organisations is another aspect in this paper. The study focuses on the relation between the municipality of Linköping and three social voluntary organisations and their characteristics.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This report investigates what attitude private forest owners in the County of Stockholm, Sweden have towards biodiversity landconservation. Private landowners were asked to answer a questionnaire containing questions about there property and there attitude towards biodiversity. The results show that private landowners attitude towards biodiversity is affected by, amongst other things, the size of their property; a larger property have a more negative owner than a smaller property. A landowner that lives on his property has a more negative attitude towards biodiversity than a landowner that?s not living on his property.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

Abstract The main purpose of this study was to investigate if and how the employees in elderly care experience stress and which underlying causes they understand to be important in their work situation. The purpose was also to investigate whether Karaseks and Theorells demands and control models could be used to explain the employees feelings of stress and to see in which categories the participants are in. Furthermore, the purpose was also to understand the participants work situation and to describe the factors and remedies the employees perceive to contribute to the stress levels at their workplace. 81 questionnaires were distributed at three different locations, two of which were in Ronneby and one in Örebro. 56 people answered the questionnaires.

Quality Control is a term often used within production and is referring to managing processes so they produce capable products. Within Quality Control, process capability index is a common measure to oversee processes. Safety Region Plots were introduced to do this graphically. In Albing & Vännman (2010) the concept of Safety Region Plots is expanded to incorporate an elliptical shape. The method of Elliptical Safety Region Plots assumes a normally distributed data.

The Swedish society woke up Boxing Day 2004 to the greatest disaster in modern times. As a result of a strong earthquake in the Indian Ocean tsunamis occurred that devastated resorts where thousands of Swedes were. In the disasters tracks were uncovered government paralysis and shortcomings of the systems control. The purpose of this study is to examine the capacity and means to demand accountability of politicians and officials of the Swedish political system. Extensive studies and the report from the commission of disasters will form the basis for the study.

The Swedish Code for Corporate Governance was introduced on July 1, 2005. All companies then listed at OM Stockholmsbörsen A-list and those on the O-list with a market value of more than three billion SKr must implement the rules in the Code. The Code includes rules for corporate governance as a complement to the legislation. The Code is based on the principle comply or explain. This means that the companies are aloud to diverge from the rules if they explain why.

Skillnader mellan förstfödda och senarefödda är ett vanligt undersökningsobjekt, där välkända stereotyper finns. Förstfödda anses vara mer målinriktade, konservativa, ansvarstagande och kravfyllda, medan senarefödda ofta påstås vara tvungna att bryta mönster och är därför mer rebelliska och öppna för nya erfarenheter. Syftet med föreliggande studie var att undersöka syskonplaceringens påverkan på sättet att attribuera orsakerna till händelser och prestationer. Rotters locus of control-skala användes i en Internetbaserad enkät, till vilken en öppen annonsering nyttjades. Studien använde en inomfamiljsdesign och begränsandes till att omfatta en traditionell kärnfamilj med biologiska föräldrar och enbart helsyskon.

In this thesis we have examined why the establishment process of travel destination is essential for the tour operators and how the process can be influenced by different conditions. The thesis is written from the perspective of the tour operators and with the tour operator Ving as our case study, we have been able to create a picture of how the establishment process of travel destination may look like.We have chosen to deal with some different areas in this thesis that all are important for the creation of a holistic picture of the process. The overall segments listed in this thesis are the process itself, the tourist, marketing, the product creation and demand. By connecting our theoretical framework to the collected empirical data from our case study, we have analyzed the establishment process and drawn our conclusions..