This essay aims to investigate the perceptions of responsible personnel in a primary school about the use and importance of EQ, emotional intelligence, in the school's early years. With a hermeneutic approach and by qualitative interviews, we have taken note of the respondents perceptions about EQ. The result shows that EQ can be understood in different ways. Instead of having a common understanding of what EQ is the respondents mention that there are different areas associated with EQ.  Two major results are 1.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

The work in project has been around since humans began to hunt in groups, building bridges or building of the Great Wall of China. In 1960- and 70´s, the word project got their value it has today. A project means a work done during a decided time, with decided economy and non-recurring nature (Jansson and Ljung 2004). The projects had a general analytical model. It was used for all projects the organization engaged.

This thesis examines the tendering process from the point of view of Swedish building contractors. The purpose with the study is to chart the decision process for the contractors during the tendering process. The study is designed as a survey study. This made it possible to reach a wide base of respondents, not letting such factors as geography being an issue. The survey itself was characterised by a very high response rate compared to other similar studies. The result from this study shows that former experience from similar projects, current workload and the clients economic condition are very important factors for both whether or not the contractor will bid for a project as well as the cost estimation and tendering price. Former experience from similar projects is also an important factor for the determination of the indirect costs.

This examination studies the gender balance of contemporary art exhibitions in Sweden. To what extent genders are equally represented assumes to be based on how the curating process considers equality work. Three categories of art organisations are studied with the intention to determine differences in equality approach between the categories. Official documents of each organisation are examined to understand how they formally relate to equality work. Statistics of the actual gender balance of each organisation are produced based on the last two years exhibition archives.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

This thesis focuses on the testing activities at the stages of development and change regardingintegration brokers. The study aimed to examine the overall challenges that exist regarding thetesting activities within this context, and the thoughts towards the development method testdrivendevelopment (TDD). TDD emphasizes high level of test coverage and where the testprocess is well integrated with the development process. To seek answers to our question weapplied qualitative interviews with companies and respondents to try to understand the globalchallenges that are related to this work and processes. The main conclusions presented in thisstudy is that the overall challenges are involving and educating project participants in the testingprocess activities and the contributory effect test have on the end product.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

The theme of this thesis is citizen participation in the planning- and design process. It turns to everyone that studies landscape architecture or work as landscape architects and I hope that it can function as a ground for discussions as well as a source for inspiration. Rågsved is a suburb south of Stockholm. Just outside the centre of this suburb, a small industrial area called Snösätra, is located. In a few years time the leaseholds for the small industries will expire and the key question is: What will happen then? This is my general concern and it was the main cause for me to start this particular work. How do you attend to a place that appears like blank sheet of paper? To an empty page that can be filled with an infinite number of different formulations.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

This research outlines studies about the relationship between social integration process of Japanese immigrants in Sweden and how social media assists in this process. The purpose of this research includes: To find out the reasons of migration to Sweden for six Japanese immigrants, any difficulties that they faced at the beginning of their immigration process and/or any positive qualities that they found in living in Sweden, whether they have accessed social media since they have moved in, if they do so, how the social media has been used and also, whether the social media has had a role to play in contributing to help their social integration process. In addition, it has been considered whether the participants have plans to return to Japan. In Sweden, there is relatively small Japanese migrant population. This social science research paper is the first in Sweden which explores the immigration process of Japanese migrants into Sweden.

The purpose of this study is to investigate teachers? efforts to teach students with dyslexia in Swedish. The intention with this study is to get the right tools to work with these kinds of students in a more improved and giving way in the future. My questions of issue are:- How can teachers facilitate the learning process for students with dyslexia?- Are pupils with dyslexia included in the teachers? education in the classroom?- How do the other pupils integrate with the dyslexia pupils in the classroom?- How does the teacher manage the situation to teach the whole class at the same time as he/she helps the pupils with dyslexia?- How do you practice when to assess and rate the students with dyslexia?The method used in this paper is a combination of participant observation and interviews with two teachers and their classes.

A geographical position and its social, cultural and political context as well as climate and specific physical characteristics define the scope for a landscape design project. This has become clearer for us in our master project where we have made a Design Program for the outdoor environment of Wollo University in Dessie, Ethiopia and analysed and reflected on the work and process. The aim for the project has been to design an attractive and functional outdoor environment for the Campus, based on the inventories and the needs and wishes of clients and users. But, the aim has also been for us as landscape architect students to gain a greater knowledge about landscape architecture and the design process by position ourselves outside our usual context. The method has been open and seeking where the site, literature studies, dialogues with people and our own experiences from the field study in Ethiopia has influenced the work. Wollo University is situated 400 kilometers north of Addis Ababa, in a mountainous landscape. It faces problems of heavy rainfall during the summer, soil erosion, a lack of essential facilities, and is still a construction site with empty spaces in-between buildings and infrastructure.