The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

AbstractHeadline: Young trouble and teenage love (Fjortisgrubbel och tonårskärlek)Number of pages: 37Author: Annika IlmoniTutor: Amelie HössjerCourse: Media and communication CPeriod: Autumn 2007University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/aim: The purpose of the work was to produce a comparing study of two Swedish teenage films from different periods of time, 1970 and 2005. An analysis was to be made of how love between teenagers as well as the heterosexual relationship in general was depicted in each of the films and further investigate the gender construction in both films.Material/method: With the intention of narrowing down the complexity and make the evaluation more lucid 5 scenes from each film were used for comparison, these were chosen through the Anglo Saxon dramaturgy. To make the scenes more comparable 4 factors were used for analysis in each scene, these were: clothes, recreational activities, behaviour and environment. Beside the above given factors the heterosexual relationship were analysed and compared in each of the scenes through the theory of dominance in dialogue.Main results: The gender construction occurs obliviously in the older film from 1970 while taking place in a more conscious way in the film from 2005. Further on the heterosexual relationship is perpetually depicted in the 70?s film with a submissive girl and predominant boy, the same dominance is easily seen in the more recent film but with a higher rate of equality as the girl is portrayed as the dominant character in almost half of all scenes.

The decisions for investment are forward-looking and the base of a long-term strategy. The research within investment have focused on diverse formulas which are used in financial assessment, which also should be complemented with qualitative evaluation. Consequently, the focus should not only be on the execution of the formulas. Less time have been spent on research concerning what actually initiates the investment proposals and affects the decision-making. This will be highlighted in this essay.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

This Master thesis is about how to involve young people in a creative process. The aim is to see what methods can be applied to make them reach the kind of knowledge they need to be able to contribute to the creation of a memorial place. Issues such as if a place that displays death has a right to exist in an urban environment or why young people should be involved in the creative process are brought up and discussed in this thesis.The memorial place that the young people contribute to is unique, in some sense, due to it not commemorating any special event or person. The purpose of the memorial is rather to serve the public when larger catastrophes occur or to serve individuals who do not have a grave they can visit to commemorate their loved ones. The idea is to place the memorial in an urban setting in the city of Borås.In this thesis the process that the young people participate in is reported in a form similar to a diary where the reader can follow the developments of the young participants, from how they gain knowledge to how they develop their ideas.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

In game development, performance is everything and the Playstation 3 provides a unique platform for utilizing parallelization of code to achieve extremely high performance. In this master?s thesis the issue of animation with smooth skinning is migrated from being a GPU process to becoming a parallelized and 358% faster process. This method is incorporated in an existing commercial game engine and integrated in a currently in development title for the Playstation 3. An in-depth study covers parallel processors, the CELL processor, used in the Playstation 3, and how contemporary industry leading game developers are utilizing the same unique architecture to increase their own games? performance..

Contemporary libraries face challenges in transforming their organization to meet the digitalized society. To develop the process of digitization of literature is a natural way for libraries to go when they already have more visitors online than physically. Since the demand for digital material is so sought after, we feel challenged to address the challenges of the Internet as an emerging functional medium for distributing knowledge. These developments will be able to significantly modify the nature of literature as well as the existing system of quality assurance. In this study, we explored and analyzed a digitization project at a research library.

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

With this study we aim to learn more about the process in creating an identity onFlashback Forum. We have observed four members of the forum to find what themesdefine thier way of making an identitity. Besides to our empirical material we foundearlier research that could support our study. The methods we used was qualitativesince we wanted to get a deep understandning for their behaviour. We found thattheese three themes were central: Language, Content and the feeling of beingAnonymous.

As companies worldwide are in search of competitiveness and larger shares of the market, organizational change has become a key-factor to sustain a competitive edge. But as organizations consist of people, the human aspect of change is not to be disregarded. When change occurs, humans need time to find their new role in the organization, a process that takes time. In this thesis the authors ask themselves what an implementation process of a new managerial role looks like. To answer this question they?ve studied LRF Konsult.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

The purpose of this paper is to study the rules of the bill 2007/08: 136 "Areformed sick-leave process of increased return to work" as related to therehabilitation chain. In the interpretation of the material I have used the ?practicallegal method? and a minor empirical study has been conducted to find out howRegion Skåne and UMAS adjust their activities to the new regulations.The government aims to reduce sick leave and on March 19, 2008,the above mentioned bill was presented to the Riksdag. The bill is a part of thegovernment's package of measures and contains proposals for a revised sick-leaveprocess. The rehabilitation chain is a part of the package and includes actions witha tighter schedule.The employer is still after the new rules playing a central role in thesick-leave process and must through early and continuous contact with theworkers start the rehabilitation process.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.